Hardware summary
| Item | Detail |
|---------|--------------------------------------------------------------------------------------------------------- -|
| MCU | ESP32-S3-WROOM-1-N16R8 (240 MHz, 16 MB Flash, 8 MB OPI PSRAM) |
| Display | 2.8" IPS 320×240, ST7789 driver, SPI |
| Touch | Goodix GT911, I2C |
| USB | Native USB-C via ESP32-S3 internal USB |
| Product page | https://www.elecrow.com/crowpanel-advance-2-8-hmi-ai-display-for-meshtastic-esp32-320x240-artificial-ips-intelligent-touchscreen.html |
| Official wiki | https://www.elecrow.com/pub/wiki/CrowPanel_Advance_2.8-HMI_ESP32_AI_Display.html |
Request
Please add support for the Elecrow CrowPanel Advance 2.8" HMI to the Bruce firmware. I own this device and would be happy to test any firmware builds against the physical hardware.
Hardware summary
| Item | Detail |
|---------|--------------------------------------------------------------------------------------------------------- -|
| MCU | ESP32-S3-WROOM-1-N16R8 (240 MHz, 16 MB Flash, 8 MB OPI PSRAM) |
| Display | 2.8" IPS 320×240, ST7789 driver, SPI |
| Touch | Goodix GT911, I2C |
| USB | Native USB-C via ESP32-S3 internal USB |
| Product page | https://www.elecrow.com/crowpanel-advance-2-8-hmi-ai-display-for-meshtastic-esp32-320x240-artificial-ips-intelligent-touchscreen.html |
| Official wiki | https://www.elecrow.com/pub/wiki/CrowPanel_Advance_2.8-HMI_ESP32_AI_Display.html |
Request
Please add support for the Elecrow CrowPanel Advance 2.8" HMI to the Bruce firmware. I own this device and would be happy to test any firmware builds against the physical hardware.