From 5cc544e44a16183850b8540ed40be850f659a6c6 Mon Sep 17 00:00:00 2001 From: Gabriella Vrban Date: Wed, 15 May 2024 12:49:33 +0000 Subject: [PATCH 1/5] new page for a new integration --- .../_integrations/ctek_nanogrid_air.markdown | 33 +++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 source/_integrations/ctek_nanogrid_air.markdown diff --git a/source/_integrations/ctek_nanogrid_air.markdown b/source/_integrations/ctek_nanogrid_air.markdown new file mode 100644 index 000000000000..ffb8d492a017 --- /dev/null +++ b/source/_integrations/ctek_nanogrid_air.markdown @@ -0,0 +1,33 @@ +--- +title: CTEK Nanogrid Air +description: Instructions on how to integrate Nanogrid Air device with Home Assistant. +#featured: true +#ha_release: +ha_category: Sensor +ha_iot_class: Local Polling +ha_config_flow: true +ha_codeowners: "@ChargeStorm" +ha_domain: nanogrid_air +ha_integration_type: integration +--- + +# CTEK Nanogrid Air +The CTEK Nanogrid Air integration allows you to connect your Nanogrid Air wireless gateway energy meter to Home Assistant. The gateway safely and automatically balances the energy load in the your home at any time of the day, allowing you to charge your EVs while your appliances still get the power they need. + +{% include integrations/config_flow.md %} + +## Troubleshooting +
+If you do not have mDNS, when adding integration, you need to add the IP address manually, otherwise it will be added automatically. +
+ +### If you encounter problems +- Check that the Nanogrid Air is connected to the electricity meter and that it is turned on. +- Refer to the Nanogrid Air manual for troubleshooting steps if it is not turned on. +- Disconnect the Nanogrid Air and reconnect it. + +### Firmware updates +After updating your Nanogrid Air firmware it might be necessary to repeat the configuration process. If you encounter problems: +- When configured using the integration: Remove the integration through Settings > Integrations > CTEK Nanogrid Air > Delete (trash can icon) + +Restart Home Assistant. Then repeat the steps like during initial setup. From 9f66a8d45c36ed604905a4581488c8634bd92af6 Mon Sep 17 00:00:00 2001 From: Gabriella Vrban Date: Fri, 17 May 2024 12:36:59 +0000 Subject: [PATCH 2/5] Rewrote the text according to standards --- .../_integrations/ctek_nanogrid_air.markdown | 22 ++++++++++++------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/source/_integrations/ctek_nanogrid_air.markdown b/source/_integrations/ctek_nanogrid_air.markdown index ffb8d492a017..03b0b38e8164 100644 --- a/source/_integrations/ctek_nanogrid_air.markdown +++ b/source/_integrations/ctek_nanogrid_air.markdown @@ -12,22 +12,28 @@ ha_integration_type: integration --- # CTEK Nanogrid Air -The CTEK Nanogrid Air integration allows you to connect your Nanogrid Air wireless gateway energy meter to Home Assistant. The gateway safely and automatically balances the energy load in the your home at any time of the day, allowing you to charge your EVs while your appliances still get the power they need. + +The CTEK Nanogrid Air integration facilitates seamless connectivity between your Nanogrid Air wireless gateway energy meter and Home Assistant. This integration empowers you to optimize energy distribution within your home, ensuring efficient charging for your electric vehicles (EVs) while prioritizing power allocation for essential appliances. {% include integrations/config_flow.md %} ## Troubleshooting +
If you do not have mDNS, when adding integration, you need to add the IP address manually, otherwise it will be added automatically.
-### If you encounter problems -- Check that the Nanogrid Air is connected to the electricity meter and that it is turned on. -- Refer to the Nanogrid Air manual for troubleshooting steps if it is not turned on. -- Disconnect the Nanogrid Air and reconnect it. +### Encountering issues? Here's what you can do + +- Verify the Nanogrid Air's connection to the electricity meter and ensure it's switched on. +- Consult the Nanogrid Air manual for further troubleshooting guidance if needed. +- Attempt to resolve issues by disconnecting and reconnecting the Nanogrid Air. ### Firmware updates -After updating your Nanogrid Air firmware it might be necessary to repeat the configuration process. If you encounter problems: -- When configured using the integration: Remove the integration through Settings > Integrations > CTEK Nanogrid Air > Delete (trash can icon) -Restart Home Assistant. Then repeat the steps like during initial setup. +After updating your Nanogrid Air's firmware, you may need to reconfigure the integration. Follow these steps if problems persist: + +- When configured using the integration: + Remove the integration through Settings > Integrations > CTEK Nanogrid Air > Delete (trash can icon) + +- Restart Home Assistant, then repeat the steps like during initial setup. From 050026bf02de11975958188ee47e117ced5f1bf1 Mon Sep 17 00:00:00 2001 From: gabbigit Date: Tue, 21 May 2024 14:52:25 +0200 Subject: [PATCH 3/5] Update source/_integrations/ctek_nanogrid_air.markdown Co-authored-by: Carl Westman --- source/_integrations/ctek_nanogrid_air.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/ctek_nanogrid_air.markdown b/source/_integrations/ctek_nanogrid_air.markdown index 03b0b38e8164..446ec30724bc 100644 --- a/source/_integrations/ctek_nanogrid_air.markdown +++ b/source/_integrations/ctek_nanogrid_air.markdown @@ -36,4 +36,4 @@ After updating your Nanogrid Air's firmware, you may need to reconfigure the int - When configured using the integration: Remove the integration through Settings > Integrations > CTEK Nanogrid Air > Delete (trash can icon) -- Restart Home Assistant, then repeat the steps like during initial setup. +- Restart Home Assistant, then repeat the steps from the initial setup. From 5dd5b9c49ae81b7914f10c06bc1e24e9b6a18b23 Mon Sep 17 00:00:00 2001 From: gabbigit Date: Tue, 21 May 2024 14:53:35 +0200 Subject: [PATCH 4/5] Update source/_integrations/ctek_nanogrid_air.markdown Co-authored-by: Carl Westman --- source/_integrations/ctek_nanogrid_air.markdown | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/source/_integrations/ctek_nanogrid_air.markdown b/source/_integrations/ctek_nanogrid_air.markdown index 446ec30724bc..3fb206f028cf 100644 --- a/source/_integrations/ctek_nanogrid_air.markdown +++ b/source/_integrations/ctek_nanogrid_air.markdown @@ -33,7 +33,6 @@ If you do not have mDNS, when adding integration, you need to add the IP address After updating your Nanogrid Air's firmware, you may need to reconfigure the integration. Follow these steps if problems persist: -- When configured using the integration: - Remove the integration through Settings > Integrations > CTEK Nanogrid Air > Delete (trash can icon) +- Remove the integration through Settings > Integrations > CTEK Nanogrid Air > Delete (trash can icon) - Restart Home Assistant, then repeat the steps from the initial setup. From 5713b3a65972cddd92025a78ec88738eda4782f5 Mon Sep 17 00:00:00 2001 From: Gabriella Vrban Date: Thu, 30 May 2024 07:58:29 +0000 Subject: [PATCH 5/5] Adding capital letters and trademark --- .../_integrations/ctek_nanogrid_air.markdown | 20 +++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/source/_integrations/ctek_nanogrid_air.markdown b/source/_integrations/ctek_nanogrid_air.markdown index 3fb206f028cf..ffd4067ea0a6 100644 --- a/source/_integrations/ctek_nanogrid_air.markdown +++ b/source/_integrations/ctek_nanogrid_air.markdown @@ -1,7 +1,7 @@ --- -title: CTEK Nanogrid Air -description: Instructions on how to integrate Nanogrid Air device with Home Assistant. -#featured: true +title: CTEK NANOGRID™ AIR +description: Instructions on how to integrate NANOGRID™ AIR device with Home Assistant. +featured: true #ha_release: ha_category: Sensor ha_iot_class: Local Polling @@ -11,9 +11,9 @@ ha_domain: nanogrid_air ha_integration_type: integration --- -# CTEK Nanogrid Air +# CTEK NANOGRID™ AIR -The CTEK Nanogrid Air integration facilitates seamless connectivity between your Nanogrid Air wireless gateway energy meter and Home Assistant. This integration empowers you to optimize energy distribution within your home, ensuring efficient charging for your electric vehicles (EVs) while prioritizing power allocation for essential appliances. +The CTEK NANOGRID™ AIR integration facilitates seamless connectivity between your NANOGRID™ AIR wireless gateway energy meter and Home Assistant. This integration empowers you to optimize energy distribution within your home, ensuring efficient charging for your electric vehicles (EVs) while prioritizing power allocation for essential appliances. {% include integrations/config_flow.md %} @@ -25,14 +25,14 @@ If you do not have mDNS, when adding integration, you need to add the IP address ### Encountering issues? Here's what you can do -- Verify the Nanogrid Air's connection to the electricity meter and ensure it's switched on. -- Consult the Nanogrid Air manual for further troubleshooting guidance if needed. -- Attempt to resolve issues by disconnecting and reconnecting the Nanogrid Air. +- Verify the NANOGRID™ AIR's connection to the electricity meter and ensure it's switched on. +- Consult the NANOGRID™ AIR manual for further troubleshooting guidance if needed. +- Attempt to resolve issues by disconnecting and reconnecting the NANOGRID™ AIR. ### Firmware updates -After updating your Nanogrid Air's firmware, you may need to reconfigure the integration. Follow these steps if problems persist: +After updating your NANOGRID™ AIR's firmware, you may need to reconfigure the integration. Follow these steps if problems persist: -- Remove the integration through Settings > Integrations > CTEK Nanogrid Air > Delete (trash can icon) +- Remove the integration through Settings > Integrations > CTEK NANOGRID™ AIR > Delete (trash can icon) - Restart Home Assistant, then repeat the steps from the initial setup.