When I run the command (after everything else works), I don't get any output in terminal or are screen. Here is what the code is showing:
root@MusicBox:# screen sudo python /root/pmb-pitft/pmb-pitft/ui.py
root@MusicBox:# dmesg | tail
[ 21.084039] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 21.095910] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.682048] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 22.715451] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 33.170861] watchdog stopped
[ 34.694913] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 35.605459] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 37.137493] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 48.698345] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 48.731387] nf_conntrack version 0.5.0 (5944 buckets, 23776 max)
When I run the command (after everything else works), I don't get any output in terminal or are screen. Here is what the code is showing:
root@MusicBox:
# screen sudo python /root/pmb-pitft/pmb-pitft/ui.py# dmesg | tailroot@MusicBox:
[ 21.084039] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 21.095910] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.682048] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 22.715451] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 33.170861] watchdog stopped
[ 34.694913] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 35.605459] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 37.137493] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 48.698345] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 48.731387] nf_conntrack version 0.5.0 (5944 buckets, 23776 max)