ci(pre-commit): Apply automatic fixes

Author: pre-commit-ci-lite[bot]

cores/esp32/Esp.cpp

@@ -579,8 +579,10 @@ uint8_t EspClass::getFlashClockDivider(void) {
 uint32_t EspClass::getFlashFrequencyMHz(void) {
   uint8_t source = getFlashSourceFrequencyMHz();
   uint8_t divider = getFlashClockDivider();
-  
-  if (divider == 0) divider = 1;  // Safety check
-  
+
+  if (divider == 0) {
+    divider = 1;  // Safety check
+  }
+
   return source / divider;
 }

cores/esp32/chip-debug-report.cpp

@@ -140,15 +140,15 @@ static void printFlashInfo(void) {
   chip_report_printf("  Block Size        : %8lu B (%6.1f KB)\n", g_rom_flashchip.block_size, b2kb(g_rom_flashchip.block_size));
   chip_report_printf("  Sector Size       : %8lu B (%6.1f KB)\n", g_rom_flashchip.sector_size, b2kb(g_rom_flashchip.sector_size));
   chip_report_printf("  Page Size         : %8lu B (%6.1f KB)\n", g_rom_flashchip.page_size, b2kb(g_rom_flashchip.page_size));
-  
+
   // Runtime flash frequency detection from hardware registers
   uint32_t actual_freq = ESP.getFlashFrequencyMHz();
   uint8_t source_freq = ESP.getFlashSourceFrequencyMHz();
   uint8_t divider = ESP.getFlashClockDivider();
-  
+
   chip_report_printf("  Bus Speed         : %lu MHz\n", actual_freq);
   chip_report_printf("  Flash Frequency   : %lu MHz (source: %u MHz, divider: %u)\n", actual_freq, source_freq, divider);
-  
+
   chip_report_printf("  Bus Mode          : ");
 #if CONFIG_ESPTOOLPY_OCT_FLASH
   chip_report_printf("OPI\n");