diff --git a/config/crd/rollout/rollout.kusionstack.io_rollouts.yaml b/config/crd/rollout/rollout.kusionstack.io_rollouts.yaml index 3de227e..fc82e62 100644 --- a/config/crd/rollout/rollout.kusionstack.io_rollouts.yaml +++ b/config/crd/rollout/rollout.kusionstack.io_rollouts.yaml @@ -70,7 +70,7 @@ spec: format: int32 type: integer strategyRef: - description: StrategyRef is the reference to the rollout strategy + description: StrategyRef is the reference to the rollout strategy. type: string trafficTopologyRefs: description: |- diff --git a/config/crd/rollout/rollout.kusionstack.io_rolloutstrategies.yaml b/config/crd/rollout/rollout.kusionstack.io_rolloutstrategies.yaml index 1d221c6..79d7120 100644 --- a/config/crd/rollout/rollout.kusionstack.io_rolloutstrategies.yaml +++ b/config/crd/rollout/rollout.kusionstack.io_rolloutstrategies.yaml @@ -2304,81 +2304,4634 @@ spec: x-kubernetes-int-or-string: true type: object type: object - canary: - description: Canary defines the canary strategy for upgrade and operation + batchV2: + description: |- + BatchV2 is the batch strategy for upgrade and operation + Mutually exclusive with Batch. + If specified, Batch must be empty. properties: - matchTargets: - description: Match defines condition used for matching resource cross clusterset - properties: - names: - description: Names is a list of workload name - items: - description: CrossClusterObjectNameReference contains cluster and name reference to a k8s object - properties: - cluster: - description: Cluster indicates the name of cluster - type: string - name: - description: Name is the resource name - type: string - required: - - name - type: object - type: array - selector: - description: Selector is a label query over a set of resources, in this case resource + batches: + description: Batches define the order of phases to execute release in canary release + items: + properties: + breakpoint: + description: If set to true, the rollout will be paused before the step starts. + type: boolean properties: - matchExpressions: - description: matchExpressions is a list of label selector requirements. The requirements are ANDed. - items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. + additionalProperties: + type: string + description: Properties contains additional information for step + type: object + targets: + description: rollout targets defines desired target replicas + items: + properties: + matchTargets: + description: Match defines condition used for matching resource cross clusterset + properties: + names: + description: Names is a list of workload name + items: + description: CrossClusterObjectNameReference contains cluster and name reference to a k8s object + properties: + cluster: + description: Cluster indicates the name of cluster + type: string + name: + description: Name is the resource name + type: string + required: + - name + type: object + type: array + selector: + description: Selector is a label query over a set of resources, in this case resource + properties: + matchExpressions: + description: matchExpressions is a list of label selector requirements. The requirements are ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label key that the selector applies to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + type: object + replicaSlidingWindow: + anyOf: + - type: integer + - type: string + description: |- + ReplicaSlidingWindow used to control the number of pods that are allowed to be upgraded in + a sliding window for progressive rollout smoothly. + x-kubernetes-int-or-string: true + replicas: + anyOf: + - type: integer + - type: string + description: Replicas is the replicas of the rollout task, which represents the number of pods to be upgraded + x-kubernetes-int-or-string: true + required: + - replicas + type: object + type: array + traffic: + description: traffic strategy + properties: + http: properties: - key: - description: key is the label key that the selector applies to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: + filters: description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. + Filters define the filters that are applied to requests that match + this rule. + + + The effects of ordering of multiple behaviors are currently unspecified. + This can change in the future based on feedback during the alpha stage. + + + Conformance-levels at this level are defined based on the type of filter: + + + - ALL core filters MUST be supported by all implementations. + - Implementers are encouraged to support extended filters. + - Implementation-specific custom filters have no API guarantees across + implementations. + + + Specifying the same filter multiple times is not supported unless explicitly + indicated in the filter. + + + All filters are expected to be compatible with each other except for the + URLRewrite and RequestRedirect filters, which may not be combined. If an + implementation can not support other combinations of filters, they must clearly + document that limitation. In cases where incompatible or unsupported + filters are specified and cause the `Accepted` condition to be set to status + `False`, implementations may use the `IncompatibleFilters` reason to specify + this configuration error. + + + Support: Core items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: - type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. + description: |- + HTTPRouteFilter defines processing steps that must be completed during the + request or response lifecycle. HTTPRouteFilters are meant as an extension + point to express processing that may be done in Gateway implementations. Some + examples include request or response modification, implementing + authentication strategies, rate-limiting, and traffic shaping. API + guarantee/conformance is defined based on the type of the filter. + properties: + extensionRef: + description: |- + ExtensionRef is an optional, implementation-specific extension to the + "filter" behavior. For example, resource "myroutefilter" in group + "networking.example.net"). ExtensionRef MUST NOT be used for core and + extended filters. + + + This filter can be used multiple times within the same rule. + + + Support: Implementation-specific + properties: + group: + description: |- + Group is the group of the referent. For example, "gateway.networking.k8s.io". + When unspecified or empty string, core API group is inferred. + maxLength: 253 + pattern: ^$|^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$ + type: string + kind: + description: Kind is kind of the referent. For example "HTTPRoute" or "Service". + maxLength: 63 + minLength: 1 + pattern: ^[a-zA-Z]([-a-zA-Z0-9]*[a-zA-Z0-9])?$ + type: string + name: + description: Name is the name of the referent. + maxLength: 253 + minLength: 1 + type: string + required: + - group + - kind + - name + type: object + requestHeaderModifier: + description: |- + RequestHeaderModifier defines a schema for a filter that modifies request + headers. + + + Support: Core + properties: + add: + description: |- + Add adds the given header(s) (name, value) to the request + before the action. It appends to any existing values associated + with the header name. + + + Input: + GET /foo HTTP/1.1 + my-header: foo + + + Config: + add: + - name: "my-header" + value: "bar,baz" + + + Output: + GET /foo HTTP/1.1 + my-header: foo,bar,baz + items: + description: HTTPHeader represents an HTTP Header name and value as defined by RFC 7230. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, the first entry with + an equivalent name MUST be considered for a match. Subsequent entries + with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + remove: + description: |- + Remove the given header(s) from the HTTP request before the action. The + value of Remove is a list of HTTP header names. Note that the header + names are case-insensitive (see + https://datatracker.ietf.org/doc/html/rfc2616#section-4.2). + + + Input: + GET /foo HTTP/1.1 + my-header1: foo + my-header2: bar + my-header3: baz + + + Config: + remove: ["my-header1", "my-header3"] + + + Output: + GET /foo HTTP/1.1 + my-header2: bar + items: + type: string + maxItems: 16 + type: array + x-kubernetes-list-type: set + set: + description: |- + Set overwrites the request with the given header (name, value) + before the action. + + + Input: + GET /foo HTTP/1.1 + my-header: foo + + + Config: + set: + - name: "my-header" + value: "bar" + + + Output: + GET /foo HTTP/1.1 + my-header: bar + items: + description: HTTPHeader represents an HTTP Header name and value as defined by RFC 7230. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, the first entry with + an equivalent name MUST be considered for a match. Subsequent entries + with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + type: object + requestMirror: + description: |- + RequestMirror defines a schema for a filter that mirrors requests. + Requests are sent to the specified destination, but responses from + that destination are ignored. + + + This filter can be used multiple times within the same rule. Note that + not all implementations will be able to support mirroring to multiple + backends. + + + Support: Extended + + + + properties: + backendRef: + description: |- + BackendRef references a resource where mirrored requests are sent. + + + Mirrored requests must be sent only to a single destination endpoint + within this BackendRef, irrespective of how many endpoints are present + within this BackendRef. + + + If the referent cannot be found, this BackendRef is invalid and must be + dropped from the Gateway. The controller must ensure the "ResolvedRefs" + condition on the Route status is set to `status: False` and not configure + this backend in the underlying implementation. + + + If there is a cross-namespace reference to an *existing* object + that is not allowed by a ReferenceGrant, the controller must ensure the + "ResolvedRefs" condition on the Route is set to `status: False`, + with the "RefNotPermitted" reason and not configure this backend in the + underlying implementation. + + + In either error case, the Message of the `ResolvedRefs` Condition + should be used to provide more detail about the problem. + + + Support: Extended for Kubernetes Service + + + Support: Implementation-specific for any other resource + properties: + group: + default: "" + description: |- + Group is the group of the referent. For example, "gateway.networking.k8s.io". + When unspecified or empty string, core API group is inferred. + maxLength: 253 + pattern: ^$|^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$ + type: string + kind: + default: Service + description: |- + Kind is the Kubernetes resource kind of the referent. For example + "Service". + + + Defaults to "Service" when not specified. + + + ExternalName services can refer to CNAME DNS records that may live + outside of the cluster and as such are difficult to reason about in + terms of conformance. They also may not be safe to forward to (see + CVE-2021-25740 for more information). Implementations SHOULD NOT + support ExternalName Services. + + + Support: Core (Services with a type other than ExternalName) + + + Support: Implementation-specific (Services with type ExternalName) + maxLength: 63 + minLength: 1 + pattern: ^[a-zA-Z]([-a-zA-Z0-9]*[a-zA-Z0-9])?$ + type: string + name: + description: Name is the name of the referent. + maxLength: 253 + minLength: 1 + type: string + namespace: + description: |- + Namespace is the namespace of the backend. When unspecified, the local + namespace is inferred. + + + Note that when a namespace different than the local namespace is specified, + a ReferenceGrant object is required in the referent namespace to allow that + namespace's owner to accept the reference. See the ReferenceGrant + documentation for details. + + + Support: Core + maxLength: 63 + minLength: 1 + pattern: ^[a-z0-9]([-a-z0-9]*[a-z0-9])?$ + type: string + port: + description: |- + Port specifies the destination port number to use for this resource. + Port is required when the referent is a Kubernetes Service. In this + case, the port number is the service port number, not the target port. + For other resources, destination port might be derived from the referent + resource or this field. + format: int32 + maximum: 65535 + minimum: 1 + type: integer + required: + - name + type: object + fraction: + description: |- + Fraction represents the fraction of requests that should be + mirrored to BackendRef. + + + Only one of Fraction or Percent may be specified. If neither field + is specified, 100% of requests will be mirrored. + + + + properties: + denominator: + default: 100 + format: int32 + minimum: 1 + type: integer + numerator: + format: int32 + minimum: 0 + type: integer + required: + - numerator + type: object + percent: + description: |- + Percent represents the percentage of requests that should be + mirrored to BackendRef. Its minimum value is 0 (indicating 0% of + requests) and its maximum value is 100 (indicating 100% of requests). + + + Only one of Fraction or Percent may be specified. If neither field + is specified, 100% of requests will be mirrored. + + + + format: int32 + maximum: 100 + minimum: 0 + type: integer + required: + - backendRef + type: object + requestRedirect: + description: |- + RequestRedirect defines a schema for a filter that responds to the + request with an HTTP redirection. + + + Support: Core + properties: + hostname: + description: |- + Hostname is the hostname to be used in the value of the `Location` + header in the response. + When empty, the hostname in the `Host` header of the request is used. + + + Support: Core + maxLength: 253 + minLength: 1 + pattern: ^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$ + type: string + path: + description: |- + Path defines parameters used to modify the path of the incoming request. + The modified path is then used to construct the `Location` header. When + empty, the request path is used as-is. + + + Support: Extended + properties: + replaceFullPath: + description: |- + ReplaceFullPath specifies the value with which to replace the full path + of a request during a rewrite or redirect. + maxLength: 1024 + type: string + replacePrefixMatch: + description: |- + ReplacePrefixMatch specifies the value with which to replace the prefix + match of a request during a rewrite or redirect. For example, a request + to "/foo/bar" with a prefix match of "/foo" and a ReplacePrefixMatch + of "/xyz" would be modified to "/xyz/bar". + + + Note that this matches the behavior of the PathPrefix match type. This + matches full path elements. A path element refers to the list of labels + in the path split by the `/` separator. When specified, a trailing `/` is + ignored. For example, the paths `/abc`, `/abc/`, and `/abc/def` would all + match the prefix `/abc`, but the path `/abcd` would not. + + + ReplacePrefixMatch is only compatible with a `PathPrefix` HTTPRouteMatch. + Using any other HTTPRouteMatch type on the same HTTPRouteRule will result in + the implementation setting the Accepted Condition for the Route to `status: False`. + + + Request Path | Prefix Match | Replace Prefix | Modified Path + -------------|--------------|----------------|---------- + /foo/bar | /foo | /xyz | /xyz/bar + /foo/bar | /foo | /xyz/ | /xyz/bar + /foo/bar | /foo/ | /xyz | /xyz/bar + /foo/bar | /foo/ | /xyz/ | /xyz/bar + /foo | /foo | /xyz | /xyz + /foo/ | /foo | /xyz | /xyz/ + /foo/bar | /foo | | /bar + /foo/ | /foo | | / + /foo | /foo | | / + /foo/ | /foo | / | / + /foo | /foo | / | / + maxLength: 1024 + type: string + type: + description: |- + Type defines the type of path modifier. Additional types may be + added in a future release of the API. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + enum: + - ReplaceFullPath + - ReplacePrefixMatch + type: string + required: + - type + type: object + port: + description: |- + Port is the port to be used in the value of the `Location` + header in the response. + + + If no port is specified, the redirect port MUST be derived using the + following rules: + + + * If redirect scheme is not-empty, the redirect port MUST be the well-known + port associated with the redirect scheme. Specifically "http" to port 80 + and "https" to port 443. If the redirect scheme does not have a + well-known port, the listener port of the Gateway SHOULD be used. + * If redirect scheme is empty, the redirect port MUST be the Gateway + Listener port. + + + Implementations SHOULD NOT add the port number in the 'Location' + header in the following cases: + + + * A Location header that will use HTTP (whether that is determined via + the Listener protocol or the Scheme field) _and_ use port 80. + * A Location header that will use HTTPS (whether that is determined via + the Listener protocol or the Scheme field) _and_ use port 443. + + + Support: Extended + format: int32 + maximum: 65535 + minimum: 1 + type: integer + scheme: + description: |- + Scheme is the scheme to be used in the value of the `Location` header in + the response. When empty, the scheme of the request is used. + + + Scheme redirects can affect the port of the redirect, for more information, + refer to the documentation for the port field of this filter. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + + + Support: Extended + enum: + - http + - https + type: string + statusCode: + default: 302 + description: |- + StatusCode is the HTTP status code to be used in response. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + + + Support: Core + enum: + - 301 + - 302 + type: integer + type: object + responseHeaderModifier: + description: |- + ResponseHeaderModifier defines a schema for a filter that modifies response + headers. + + + Support: Extended + properties: + add: + description: |- + Add adds the given header(s) (name, value) to the request + before the action. It appends to any existing values associated + with the header name. + + + Input: + GET /foo HTTP/1.1 + my-header: foo + + + Config: + add: + - name: "my-header" + value: "bar,baz" + + + Output: + GET /foo HTTP/1.1 + my-header: foo,bar,baz + items: + description: HTTPHeader represents an HTTP Header name and value as defined by RFC 7230. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, the first entry with + an equivalent name MUST be considered for a match. Subsequent entries + with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + remove: + description: |- + Remove the given header(s) from the HTTP request before the action. The + value of Remove is a list of HTTP header names. Note that the header + names are case-insensitive (see + https://datatracker.ietf.org/doc/html/rfc2616#section-4.2). + + + Input: + GET /foo HTTP/1.1 + my-header1: foo + my-header2: bar + my-header3: baz + + + Config: + remove: ["my-header1", "my-header3"] + + + Output: + GET /foo HTTP/1.1 + my-header2: bar + items: + type: string + maxItems: 16 + type: array + x-kubernetes-list-type: set + set: + description: |- + Set overwrites the request with the given header (name, value) + before the action. + + + Input: + GET /foo HTTP/1.1 + my-header: foo + + + Config: + set: + - name: "my-header" + value: "bar" + + + Output: + GET /foo HTTP/1.1 + my-header: bar + items: + description: HTTPHeader represents an HTTP Header name and value as defined by RFC 7230. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, the first entry with + an equivalent name MUST be considered for a match. Subsequent entries + with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + type: object + type: + description: |- + Type identifies the type of filter to apply. As with other API fields, + types are classified into three conformance levels: + + + - Core: Filter types and their corresponding configuration defined by + "Support: Core" in this package, e.g. "RequestHeaderModifier". All + implementations must support core filters. + + + - Extended: Filter types and their corresponding configuration defined by + "Support: Extended" in this package, e.g. "RequestMirror". Implementers + are encouraged to support extended filters. + + + - Implementation-specific: Filters that are defined and supported by + specific vendors. + In the future, filters showing convergence in behavior across multiple + implementations will be considered for inclusion in extended or core + conformance levels. Filter-specific configuration for such filters + is specified using the ExtensionRef field. `Type` should be set to + "ExtensionRef" for custom filters. + + + Implementers are encouraged to define custom implementation types to + extend the core API with implementation-specific behavior. + + + If a reference to a custom filter type cannot be resolved, the filter + MUST NOT be skipped. Instead, requests that would have been processed by + that filter MUST receive a HTTP error response. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + enum: + - RequestHeaderModifier + - ResponseHeaderModifier + - RequestMirror + - RequestRedirect + - URLRewrite + - ExtensionRef + type: string + urlRewrite: + description: |- + URLRewrite defines a schema for a filter that modifies a request during forwarding. + + + Support: Extended + properties: + hostname: + description: |- + Hostname is the value to be used to replace the Host header value during + forwarding. + + + Support: Extended + maxLength: 253 + minLength: 1 + pattern: ^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$ + type: string + path: + description: |- + Path defines a path rewrite. + + + Support: Extended + properties: + replaceFullPath: + description: |- + ReplaceFullPath specifies the value with which to replace the full path + of a request during a rewrite or redirect. + maxLength: 1024 + type: string + replacePrefixMatch: + description: |- + ReplacePrefixMatch specifies the value with which to replace the prefix + match of a request during a rewrite or redirect. For example, a request + to "/foo/bar" with a prefix match of "/foo" and a ReplacePrefixMatch + of "/xyz" would be modified to "/xyz/bar". + + + Note that this matches the behavior of the PathPrefix match type. This + matches full path elements. A path element refers to the list of labels + in the path split by the `/` separator. When specified, a trailing `/` is + ignored. For example, the paths `/abc`, `/abc/`, and `/abc/def` would all + match the prefix `/abc`, but the path `/abcd` would not. + + + ReplacePrefixMatch is only compatible with a `PathPrefix` HTTPRouteMatch. + Using any other HTTPRouteMatch type on the same HTTPRouteRule will result in + the implementation setting the Accepted Condition for the Route to `status: False`. + + + Request Path | Prefix Match | Replace Prefix | Modified Path + -------------|--------------|----------------|---------- + /foo/bar | /foo | /xyz | /xyz/bar + /foo/bar | /foo | /xyz/ | /xyz/bar + /foo/bar | /foo/ | /xyz | /xyz/bar + /foo/bar | /foo/ | /xyz/ | /xyz/bar + /foo | /foo | /xyz | /xyz + /foo/ | /foo | /xyz | /xyz/ + /foo/bar | /foo | | /bar + /foo/ | /foo | | / + /foo | /foo | | / + /foo/ | /foo | / | / + /foo | /foo | / | / + maxLength: 1024 + type: string + type: + description: |- + Type defines the type of path modifier. Additional types may be + added in a future release of the API. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + enum: + - ReplaceFullPath + - ReplacePrefixMatch + type: string + required: + - type + type: object + type: object + required: + - type + type: object + maxItems: 16 + type: array + matches: + description: |- + Matches define conditions used for matching the rule against incoming + HTTP requests. Each match is independent, i.e. this rule will be matched + if **any** one of the matches is satisfied. + + + For example, take the following matches configuration: + + + ``` + matches: + - path: + value: "/foo" + headers: + - name: "version" + value: "v2" + - path: + value: "/v2/foo" + ``` + + + For a request to match against this rule, a request must satisfy + EITHER of the two conditions: + + + - path prefixed with `/foo` AND contains the header `version: v2` + - path prefix of `/v2/foo` + + + See the documentation for HTTPRouteMatch on how to specify multiple + match conditions that should be ANDed together. + + + If no matches are specified, the default is a prefix + path match on "/", which has the effect of matching every + HTTP request. + + + Proxy or Load Balancer routing configuration generated from HTTPRoutes + MUST prioritize matches based on the following criteria, continuing on + ties. Across all rules specified on applicable Routes, precedence must be + given to the match having: + + + * "Exact" path match. + * "Prefix" path match with largest number of characters. + * Method match. + * Largest number of header matches. + * Largest number of query param matches. + + + Note: The precedence of RegularExpression path matches are implementation-specific. + + + If ties still exist across multiple Routes, matching precedence MUST be + determined in order of the following criteria, continuing on ties: + + + * The oldest Route based on creation timestamp. + * The Route appearing first in alphabetical order by + "{namespace}/{name}". + + + If ties still exist within an HTTPRoute, matching precedence MUST be granted + to the FIRST matching rule (in list order) with a match meeting the above + criteria. + + + When no rules matching a request have been successfully attached to the + parent a request is coming from, a HTTP 404 status code MUST be returned. + items: + properties: + headers: + description: |- + Headers specifies HTTP request header matchers. Multiple match values are + ANDed together, meaning, a request must match all the specified headers + to select the route. + items: + description: |- + HTTPHeaderMatch describes how to select a HTTP route by matching HTTP request + headers. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, only the first + entry with an equivalent name MUST be considered for a match. Subsequent + entries with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + + + When a header is repeated in an HTTP request, it is + implementation-specific behavior as to how this is represented. + Generally, proxies should follow the guidance from the RFC: + https://www.rfc-editor.org/rfc/rfc7230.html#section-3.2.2 regarding + processing a repeated header, with special handling for "Set-Cookie". + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + type: + default: Exact + description: |- + Type specifies how to match against the value of the header. + + + Support: Core (Exact) + + + Support: Implementation-specific (RegularExpression) + + + Since RegularExpression HeaderMatchType has implementation-specific + conformance, implementations can support POSIX, PCRE or any other dialects + of regular expressions. Please read the implementation's documentation to + determine the supported dialect. + enum: + - Exact + - RegularExpression + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + path: + description: Path specifies a HTTP request path matcher. + properties: + type: + default: PathPrefix + description: |- + Type specifies how to match against the path Value. + + + Support: Core (Exact, PathPrefix) + + + Support: Implementation-specific (RegularExpression) + enum: + - Exact + - PathPrefix + - RegularExpression + type: string + value: + default: / + description: Value of the HTTP path to match against. + maxLength: 1024 + type: string + type: object + queryParams: + description: |- + QueryParams specifies HTTP query parameter matchers. Multiple match + values are ANDed together, meaning, a request must match all the + specified query parameters to select the route. + + + Support: Extended + items: + description: |- + HTTPQueryParamMatch describes how to select a HTTP route by matching HTTP + query parameters. + properties: + name: + description: |- + Name is the name of the HTTP query param to be matched. This must be an + exact string match. (See + https://tools.ietf.org/html/rfc7230#section-2.7.3). + + + If multiple entries specify equivalent query param names, only the first + entry with an equivalent name MUST be considered for a match. Subsequent + entries with an equivalent query param name MUST be ignored. + + + If a query param is repeated in an HTTP request, the behavior is + purposely left undefined, since different data planes have different + capabilities. However, it is *recommended* that implementations should + match against the first value of the param if the data plane supports it, + as this behavior is expected in other load balancing contexts outside of + the Gateway API. + + + Users SHOULD NOT route traffic based on repeated query params to guard + themselves against potential differences in the implementations. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + type: + default: Exact + description: |- + Type specifies how to match against the value of the query parameter. + + + Support: Extended (Exact) + + + Support: Implementation-specific (RegularExpression) + + + Since RegularExpression QueryParamMatchType has Implementation-specific + conformance, implementations can support POSIX, PCRE or any other + dialects of regular expressions. Please read the implementation's + documentation to determine the supported dialect. + enum: + - Exact + - RegularExpression + type: string + value: + description: Value is the value of HTTP query param to be matched. + maxLength: 1024 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + type: object + maxItems: 8 + type: array + stableTraffic: + description: StableTraffic indicate the base traffic rule + properties: + filters: + description: |- + Filters define the filters that are applied to requests that match + this rule. + + + The effects of ordering of multiple behaviors are currently unspecified. + This can change in the future based on feedback during the alpha stage. + + + Conformance-levels at this level are defined based on the type of filter: + + + - ALL core filters MUST be supported by all implementations. + - Implementers are encouraged to support extended filters. + - Implementation-specific custom filters have no API guarantees across + implementations. + + + Specifying the same filter multiple times is not supported unless explicitly + indicated in the filter. + + + All filters are expected to be compatible with each other except for the + URLRewrite and RequestRedirect filters, which may not be combined. If an + implementation can not support other combinations of filters, they must clearly + document that limitation. In cases where incompatible or unsupported + filters are specified and cause the `Accepted` condition to be set to status + `False`, implementations may use the `IncompatibleFilters` reason to specify + this configuration error. + + + Support: Core + items: + description: |- + HTTPRouteFilter defines processing steps that must be completed during the + request or response lifecycle. HTTPRouteFilters are meant as an extension + point to express processing that may be done in Gateway implementations. Some + examples include request or response modification, implementing + authentication strategies, rate-limiting, and traffic shaping. API + guarantee/conformance is defined based on the type of the filter. + properties: + extensionRef: + description: |- + ExtensionRef is an optional, implementation-specific extension to the + "filter" behavior. For example, resource "myroutefilter" in group + "networking.example.net"). ExtensionRef MUST NOT be used for core and + extended filters. + + + This filter can be used multiple times within the same rule. + + + Support: Implementation-specific + properties: + group: + description: |- + Group is the group of the referent. For example, "gateway.networking.k8s.io". + When unspecified or empty string, core API group is inferred. + maxLength: 253 + pattern: ^$|^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$ + type: string + kind: + description: Kind is kind of the referent. For example "HTTPRoute" or "Service". + maxLength: 63 + minLength: 1 + pattern: ^[a-zA-Z]([-a-zA-Z0-9]*[a-zA-Z0-9])?$ + type: string + name: + description: Name is the name of the referent. + maxLength: 253 + minLength: 1 + type: string + required: + - group + - kind + - name + type: object + requestHeaderModifier: + description: |- + RequestHeaderModifier defines a schema for a filter that modifies request + headers. + + + Support: Core + properties: + add: + description: |- + Add adds the given header(s) (name, value) to the request + before the action. It appends to any existing values associated + with the header name. + + + Input: + GET /foo HTTP/1.1 + my-header: foo + + + Config: + add: + - name: "my-header" + value: "bar,baz" + + + Output: + GET /foo HTTP/1.1 + my-header: foo,bar,baz + items: + description: HTTPHeader represents an HTTP Header name and value as defined by RFC 7230. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, the first entry with + an equivalent name MUST be considered for a match. Subsequent entries + with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + remove: + description: |- + Remove the given header(s) from the HTTP request before the action. The + value of Remove is a list of HTTP header names. Note that the header + names are case-insensitive (see + https://datatracker.ietf.org/doc/html/rfc2616#section-4.2). + + + Input: + GET /foo HTTP/1.1 + my-header1: foo + my-header2: bar + my-header3: baz + + + Config: + remove: ["my-header1", "my-header3"] + + + Output: + GET /foo HTTP/1.1 + my-header2: bar + items: + type: string + maxItems: 16 + type: array + x-kubernetes-list-type: set + set: + description: |- + Set overwrites the request with the given header (name, value) + before the action. + + + Input: + GET /foo HTTP/1.1 + my-header: foo + + + Config: + set: + - name: "my-header" + value: "bar" + + + Output: + GET /foo HTTP/1.1 + my-header: bar + items: + description: HTTPHeader represents an HTTP Header name and value as defined by RFC 7230. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, the first entry with + an equivalent name MUST be considered for a match. Subsequent entries + with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + type: object + requestMirror: + description: |- + RequestMirror defines a schema for a filter that mirrors requests. + Requests are sent to the specified destination, but responses from + that destination are ignored. + + + This filter can be used multiple times within the same rule. Note that + not all implementations will be able to support mirroring to multiple + backends. + + + Support: Extended + + + + properties: + backendRef: + description: |- + BackendRef references a resource where mirrored requests are sent. + + + Mirrored requests must be sent only to a single destination endpoint + within this BackendRef, irrespective of how many endpoints are present + within this BackendRef. + + + If the referent cannot be found, this BackendRef is invalid and must be + dropped from the Gateway. The controller must ensure the "ResolvedRefs" + condition on the Route status is set to `status: False` and not configure + this backend in the underlying implementation. + + + If there is a cross-namespace reference to an *existing* object + that is not allowed by a ReferenceGrant, the controller must ensure the + "ResolvedRefs" condition on the Route is set to `status: False`, + with the "RefNotPermitted" reason and not configure this backend in the + underlying implementation. + + + In either error case, the Message of the `ResolvedRefs` Condition + should be used to provide more detail about the problem. + + + Support: Extended for Kubernetes Service + + + Support: Implementation-specific for any other resource + properties: + group: + default: "" + description: |- + Group is the group of the referent. For example, "gateway.networking.k8s.io". + When unspecified or empty string, core API group is inferred. + maxLength: 253 + pattern: ^$|^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$ + type: string + kind: + default: Service + description: |- + Kind is the Kubernetes resource kind of the referent. For example + "Service". + + + Defaults to "Service" when not specified. + + + ExternalName services can refer to CNAME DNS records that may live + outside of the cluster and as such are difficult to reason about in + terms of conformance. They also may not be safe to forward to (see + CVE-2021-25740 for more information). Implementations SHOULD NOT + support ExternalName Services. + + + Support: Core (Services with a type other than ExternalName) + + + Support: Implementation-specific (Services with type ExternalName) + maxLength: 63 + minLength: 1 + pattern: ^[a-zA-Z]([-a-zA-Z0-9]*[a-zA-Z0-9])?$ + type: string + name: + description: Name is the name of the referent. + maxLength: 253 + minLength: 1 + type: string + namespace: + description: |- + Namespace is the namespace of the backend. When unspecified, the local + namespace is inferred. + + + Note that when a namespace different than the local namespace is specified, + a ReferenceGrant object is required in the referent namespace to allow that + namespace's owner to accept the reference. See the ReferenceGrant + documentation for details. + + + Support: Core + maxLength: 63 + minLength: 1 + pattern: ^[a-z0-9]([-a-z0-9]*[a-z0-9])?$ + type: string + port: + description: |- + Port specifies the destination port number to use for this resource. + Port is required when the referent is a Kubernetes Service. In this + case, the port number is the service port number, not the target port. + For other resources, destination port might be derived from the referent + resource or this field. + format: int32 + maximum: 65535 + minimum: 1 + type: integer + required: + - name + type: object + fraction: + description: |- + Fraction represents the fraction of requests that should be + mirrored to BackendRef. + + + Only one of Fraction or Percent may be specified. If neither field + is specified, 100% of requests will be mirrored. + + + + properties: + denominator: + default: 100 + format: int32 + minimum: 1 + type: integer + numerator: + format: int32 + minimum: 0 + type: integer + required: + - numerator + type: object + percent: + description: |- + Percent represents the percentage of requests that should be + mirrored to BackendRef. Its minimum value is 0 (indicating 0% of + requests) and its maximum value is 100 (indicating 100% of requests). + + + Only one of Fraction or Percent may be specified. If neither field + is specified, 100% of requests will be mirrored. + + + + format: int32 + maximum: 100 + minimum: 0 + type: integer + required: + - backendRef + type: object + requestRedirect: + description: |- + RequestRedirect defines a schema for a filter that responds to the + request with an HTTP redirection. + + + Support: Core + properties: + hostname: + description: |- + Hostname is the hostname to be used in the value of the `Location` + header in the response. + When empty, the hostname in the `Host` header of the request is used. + + + Support: Core + maxLength: 253 + minLength: 1 + pattern: ^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$ + type: string + path: + description: |- + Path defines parameters used to modify the path of the incoming request. + The modified path is then used to construct the `Location` header. When + empty, the request path is used as-is. + + + Support: Extended + properties: + replaceFullPath: + description: |- + ReplaceFullPath specifies the value with which to replace the full path + of a request during a rewrite or redirect. + maxLength: 1024 + type: string + replacePrefixMatch: + description: |- + ReplacePrefixMatch specifies the value with which to replace the prefix + match of a request during a rewrite or redirect. For example, a request + to "/foo/bar" with a prefix match of "/foo" and a ReplacePrefixMatch + of "/xyz" would be modified to "/xyz/bar". + + + Note that this matches the behavior of the PathPrefix match type. This + matches full path elements. A path element refers to the list of labels + in the path split by the `/` separator. When specified, a trailing `/` is + ignored. For example, the paths `/abc`, `/abc/`, and `/abc/def` would all + match the prefix `/abc`, but the path `/abcd` would not. + + + ReplacePrefixMatch is only compatible with a `PathPrefix` HTTPRouteMatch. + Using any other HTTPRouteMatch type on the same HTTPRouteRule will result in + the implementation setting the Accepted Condition for the Route to `status: False`. + + + Request Path | Prefix Match | Replace Prefix | Modified Path + -------------|--------------|----------------|---------- + /foo/bar | /foo | /xyz | /xyz/bar + /foo/bar | /foo | /xyz/ | /xyz/bar + /foo/bar | /foo/ | /xyz | /xyz/bar + /foo/bar | /foo/ | /xyz/ | /xyz/bar + /foo | /foo | /xyz | /xyz + /foo/ | /foo | /xyz | /xyz/ + /foo/bar | /foo | | /bar + /foo/ | /foo | | / + /foo | /foo | | / + /foo/ | /foo | / | / + /foo | /foo | / | / + maxLength: 1024 + type: string + type: + description: |- + Type defines the type of path modifier. Additional types may be + added in a future release of the API. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + enum: + - ReplaceFullPath + - ReplacePrefixMatch + type: string + required: + - type + type: object + port: + description: |- + Port is the port to be used in the value of the `Location` + header in the response. + + + If no port is specified, the redirect port MUST be derived using the + following rules: + + + * If redirect scheme is not-empty, the redirect port MUST be the well-known + port associated with the redirect scheme. Specifically "http" to port 80 + and "https" to port 443. If the redirect scheme does not have a + well-known port, the listener port of the Gateway SHOULD be used. + * If redirect scheme is empty, the redirect port MUST be the Gateway + Listener port. + + + Implementations SHOULD NOT add the port number in the 'Location' + header in the following cases: + + + * A Location header that will use HTTP (whether that is determined via + the Listener protocol or the Scheme field) _and_ use port 80. + * A Location header that will use HTTPS (whether that is determined via + the Listener protocol or the Scheme field) _and_ use port 443. + + + Support: Extended + format: int32 + maximum: 65535 + minimum: 1 + type: integer + scheme: + description: |- + Scheme is the scheme to be used in the value of the `Location` header in + the response. When empty, the scheme of the request is used. + + + Scheme redirects can affect the port of the redirect, for more information, + refer to the documentation for the port field of this filter. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + + + Support: Extended + enum: + - http + - https + type: string + statusCode: + default: 302 + description: |- + StatusCode is the HTTP status code to be used in response. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + + + Support: Core + enum: + - 301 + - 302 + type: integer + type: object + responseHeaderModifier: + description: |- + ResponseHeaderModifier defines a schema for a filter that modifies response + headers. + + + Support: Extended + properties: + add: + description: |- + Add adds the given header(s) (name, value) to the request + before the action. It appends to any existing values associated + with the header name. + + + Input: + GET /foo HTTP/1.1 + my-header: foo + + + Config: + add: + - name: "my-header" + value: "bar,baz" + + + Output: + GET /foo HTTP/1.1 + my-header: foo,bar,baz + items: + description: HTTPHeader represents an HTTP Header name and value as defined by RFC 7230. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, the first entry with + an equivalent name MUST be considered for a match. Subsequent entries + with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + remove: + description: |- + Remove the given header(s) from the HTTP request before the action. The + value of Remove is a list of HTTP header names. Note that the header + names are case-insensitive (see + https://datatracker.ietf.org/doc/html/rfc2616#section-4.2). + + + Input: + GET /foo HTTP/1.1 + my-header1: foo + my-header2: bar + my-header3: baz + + + Config: + remove: ["my-header1", "my-header3"] + + + Output: + GET /foo HTTP/1.1 + my-header2: bar + items: + type: string + maxItems: 16 + type: array + x-kubernetes-list-type: set + set: + description: |- + Set overwrites the request with the given header (name, value) + before the action. + + + Input: + GET /foo HTTP/1.1 + my-header: foo + + + Config: + set: + - name: "my-header" + value: "bar" + + + Output: + GET /foo HTTP/1.1 + my-header: bar + items: + description: HTTPHeader represents an HTTP Header name and value as defined by RFC 7230. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, the first entry with + an equivalent name MUST be considered for a match. Subsequent entries + with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + type: object + type: + description: |- + Type identifies the type of filter to apply. As with other API fields, + types are classified into three conformance levels: + + + - Core: Filter types and their corresponding configuration defined by + "Support: Core" in this package, e.g. "RequestHeaderModifier". All + implementations must support core filters. + + + - Extended: Filter types and their corresponding configuration defined by + "Support: Extended" in this package, e.g. "RequestMirror". Implementers + are encouraged to support extended filters. + + + - Implementation-specific: Filters that are defined and supported by + specific vendors. + In the future, filters showing convergence in behavior across multiple + implementations will be considered for inclusion in extended or core + conformance levels. Filter-specific configuration for such filters + is specified using the ExtensionRef field. `Type` should be set to + "ExtensionRef" for custom filters. + + + Implementers are encouraged to define custom implementation types to + extend the core API with implementation-specific behavior. + + + If a reference to a custom filter type cannot be resolved, the filter + MUST NOT be skipped. Instead, requests that would have been processed by + that filter MUST receive a HTTP error response. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + enum: + - RequestHeaderModifier + - ResponseHeaderModifier + - RequestMirror + - RequestRedirect + - URLRewrite + - ExtensionRef + type: string + urlRewrite: + description: |- + URLRewrite defines a schema for a filter that modifies a request during forwarding. + + + Support: Extended + properties: + hostname: + description: |- + Hostname is the value to be used to replace the Host header value during + forwarding. + + + Support: Extended + maxLength: 253 + minLength: 1 + pattern: ^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$ + type: string + path: + description: |- + Path defines a path rewrite. + + + Support: Extended + properties: + replaceFullPath: + description: |- + ReplaceFullPath specifies the value with which to replace the full path + of a request during a rewrite or redirect. + maxLength: 1024 + type: string + replacePrefixMatch: + description: |- + ReplacePrefixMatch specifies the value with which to replace the prefix + match of a request during a rewrite or redirect. For example, a request + to "/foo/bar" with a prefix match of "/foo" and a ReplacePrefixMatch + of "/xyz" would be modified to "/xyz/bar". + + + Note that this matches the behavior of the PathPrefix match type. This + matches full path elements. A path element refers to the list of labels + in the path split by the `/` separator. When specified, a trailing `/` is + ignored. For example, the paths `/abc`, `/abc/`, and `/abc/def` would all + match the prefix `/abc`, but the path `/abcd` would not. + + + ReplacePrefixMatch is only compatible with a `PathPrefix` HTTPRouteMatch. + Using any other HTTPRouteMatch type on the same HTTPRouteRule will result in + the implementation setting the Accepted Condition for the Route to `status: False`. + + + Request Path | Prefix Match | Replace Prefix | Modified Path + -------------|--------------|----------------|---------- + /foo/bar | /foo | /xyz | /xyz/bar + /foo/bar | /foo | /xyz/ | /xyz/bar + /foo/bar | /foo/ | /xyz | /xyz/bar + /foo/bar | /foo/ | /xyz/ | /xyz/bar + /foo | /foo | /xyz | /xyz + /foo/ | /foo | /xyz | /xyz/ + /foo/bar | /foo | | /bar + /foo/ | /foo | | / + /foo | /foo | | / + /foo/ | /foo | / | / + /foo | /foo | / | / + maxLength: 1024 + type: string + type: + description: |- + Type defines the type of path modifier. Additional types may be + added in a future release of the API. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + enum: + - ReplaceFullPath + - ReplacePrefixMatch + type: string + required: + - type + type: object + type: object + required: + - type + type: object + maxItems: 16 + type: array + matches: + description: |- + Matches define conditions used for matching the rule against incoming + HTTP requests. Each match is independent, i.e. this rule will be matched + if **any** one of the matches is satisfied. + + + For example, take the following matches configuration: + + + ``` + matches: + - path: + value: "/foo" + headers: + - name: "version" + value: "v2" + - path: + value: "/v2/foo" + ``` + + + For a request to match against this rule, a request must satisfy + EITHER of the two conditions: + + + - path prefixed with `/foo` AND contains the header `version: v2` + - path prefix of `/v2/foo` + + + See the documentation for HTTPRouteMatch on how to specify multiple + match conditions that should be ANDed together. + + + If no matches are specified, the default is a prefix + path match on "/", which has the effect of matching every + HTTP request. + + + Proxy or Load Balancer routing configuration generated from HTTPRoutes + MUST prioritize matches based on the following criteria, continuing on + ties. Across all rules specified on applicable Routes, precedence must be + given to the match having: + + + * "Exact" path match. + * "Prefix" path match with largest number of characters. + * Method match. + * Largest number of header matches. + * Largest number of query param matches. + + + Note: The precedence of RegularExpression path matches are implementation-specific. + + + If ties still exist across multiple Routes, matching precedence MUST be + determined in order of the following criteria, continuing on ties: + + + * The oldest Route based on creation timestamp. + * The Route appearing first in alphabetical order by + "{namespace}/{name}". + + + If ties still exist within an HTTPRoute, matching precedence MUST be granted + to the FIRST matching rule (in list order) with a match meeting the above + criteria. + + + When no rules matching a request have been successfully attached to the + parent a request is coming from, a HTTP 404 status code MUST be returned. + items: + properties: + headers: + description: |- + Headers specifies HTTP request header matchers. Multiple match values are + ANDed together, meaning, a request must match all the specified headers + to select the route. + items: + description: |- + HTTPHeaderMatch describes how to select a HTTP route by matching HTTP request + headers. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, only the first + entry with an equivalent name MUST be considered for a match. Subsequent + entries with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + + + When a header is repeated in an HTTP request, it is + implementation-specific behavior as to how this is represented. + Generally, proxies should follow the guidance from the RFC: + https://www.rfc-editor.org/rfc/rfc7230.html#section-3.2.2 regarding + processing a repeated header, with special handling for "Set-Cookie". + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + type: + default: Exact + description: |- + Type specifies how to match against the value of the header. + + + Support: Core (Exact) + + + Support: Implementation-specific (RegularExpression) + + + Since RegularExpression HeaderMatchType has implementation-specific + conformance, implementations can support POSIX, PCRE or any other dialects + of regular expressions. Please read the implementation's documentation to + determine the supported dialect. + enum: + - Exact + - RegularExpression + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + path: + description: Path specifies a HTTP request path matcher. + properties: + type: + default: PathPrefix + description: |- + Type specifies how to match against the path Value. + + + Support: Core (Exact, PathPrefix) + + + Support: Implementation-specific (RegularExpression) + enum: + - Exact + - PathPrefix + - RegularExpression + type: string + value: + default: / + description: Value of the HTTP path to match against. + maxLength: 1024 + type: string + type: object + queryParams: + description: |- + QueryParams specifies HTTP query parameter matchers. Multiple match + values are ANDed together, meaning, a request must match all the + specified query parameters to select the route. + + + Support: Extended + items: + description: |- + HTTPQueryParamMatch describes how to select a HTTP route by matching HTTP + query parameters. + properties: + name: + description: |- + Name is the name of the HTTP query param to be matched. This must be an + exact string match. (See + https://tools.ietf.org/html/rfc7230#section-2.7.3). + + + If multiple entries specify equivalent query param names, only the first + entry with an equivalent name MUST be considered for a match. Subsequent + entries with an equivalent query param name MUST be ignored. + + + If a query param is repeated in an HTTP request, the behavior is + purposely left undefined, since different data planes have different + capabilities. However, it is *recommended* that implementations should + match against the first value of the param if the data plane supports it, + as this behavior is expected in other load balancing contexts outside of + the Gateway API. + + + Users SHOULD NOT route traffic based on repeated query params to guard + themselves against potential differences in the implementations. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + type: + default: Exact + description: |- + Type specifies how to match against the value of the query parameter. + + + Support: Extended (Exact) + + + Support: Implementation-specific (RegularExpression) + + + Since RegularExpression QueryParamMatchType has Implementation-specific + conformance, implementations can support POSIX, PCRE or any other + dialects of regular expressions. Please read the implementation's + documentation to determine the supported dialect. + enum: + - Exact + - RegularExpression + type: string + value: + description: Value is the value of HTTP query param to be matched. + maxLength: 1024 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + type: object + maxItems: 8 + type: array + type: object + weight: + description: Weight indicate how many percentage of traffic the canary pods should receive + format: int32 + maximum: 100 + minimum: 0 + type: integer + type: object + type: object + required: + - targets + type: object + type: array + toleration: + description: Toleration is the toleration policy of the canary strategy + properties: + initialDelaySeconds: + description: Number of seconds after the toleration check has started before the task are initiated. + format: int32 + type: integer + taskFailureThreshold: + anyOf: + - type: integer + - type: string + description: |- + FailureThreshold indicates how many failed pods can be tolerated before marking the rollout task as success + If not set, the default value is 0, which means no failed pods can be tolerated + This is a task level threshold. + x-kubernetes-int-or-string: true + workloadTotalFailureThreshold: + anyOf: + - type: integer + - type: string + description: |- + WorkloadFailureThreshold indicates how many failed pods can be tolerated in all upgraded pods of one workload. + The default value is 0, which means no failed pods can be tolerated. + This is a workload level threshold. + x-kubernetes-int-or-string: true + type: object + type: object + canary: + description: Canary defines the canary strategy for upgrade and operation + properties: + matchTargets: + description: Match defines condition used for matching resource cross clusterset + properties: + names: + description: Names is a list of workload name + items: + description: CrossClusterObjectNameReference contains cluster and name reference to a k8s object + properties: + cluster: + description: Cluster indicates the name of cluster + type: string + name: + description: Name is the resource name + type: string + required: + - name + type: object + type: array + selector: + description: Selector is a label query over a set of resources, in this case resource + properties: + matchExpressions: + description: matchExpressions is a list of label selector requirements. The requirements are ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label key that the selector applies to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + type: object + properties: + additionalProperties: + type: string + description: Properties contains additional information for step + type: object + replicas: + anyOf: + - type: integer + - type: string + description: Replicas is the replicas of the rollout task, which represents the number of pods to be upgraded + x-kubernetes-int-or-string: true + templateMetadataPatch: + description: TemplateMetadataPatch defines a patch for workload template metadata. + properties: + annotations: + additionalProperties: + type: string + description: Annotations are additional metadata that can be included. + type: object + labels: + additionalProperties: + type: string + description: Labels are additional metadata that can be included. + type: object + type: object + traffic: + description: traffic strategy + properties: + http: + properties: + filters: + description: |- + Filters define the filters that are applied to requests that match + this rule. + + + The effects of ordering of multiple behaviors are currently unspecified. + This can change in the future based on feedback during the alpha stage. + + + Conformance-levels at this level are defined based on the type of filter: + + + - ALL core filters MUST be supported by all implementations. + - Implementers are encouraged to support extended filters. + - Implementation-specific custom filters have no API guarantees across + implementations. + + + Specifying the same filter multiple times is not supported unless explicitly + indicated in the filter. + + + All filters are expected to be compatible with each other except for the + URLRewrite and RequestRedirect filters, which may not be combined. If an + implementation can not support other combinations of filters, they must clearly + document that limitation. In cases where incompatible or unsupported + filters are specified and cause the `Accepted` condition to be set to status + `False`, implementations may use the `IncompatibleFilters` reason to specify + this configuration error. + + + Support: Core + items: + description: |- + HTTPRouteFilter defines processing steps that must be completed during the + request or response lifecycle. HTTPRouteFilters are meant as an extension + point to express processing that may be done in Gateway implementations. Some + examples include request or response modification, implementing + authentication strategies, rate-limiting, and traffic shaping. API + guarantee/conformance is defined based on the type of the filter. + properties: + extensionRef: + description: |- + ExtensionRef is an optional, implementation-specific extension to the + "filter" behavior. For example, resource "myroutefilter" in group + "networking.example.net"). ExtensionRef MUST NOT be used for core and + extended filters. + + + This filter can be used multiple times within the same rule. + + + Support: Implementation-specific + properties: + group: + description: |- + Group is the group of the referent. For example, "gateway.networking.k8s.io". + When unspecified or empty string, core API group is inferred. + maxLength: 253 + pattern: ^$|^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$ + type: string + kind: + description: Kind is kind of the referent. For example "HTTPRoute" or "Service". + maxLength: 63 + minLength: 1 + pattern: ^[a-zA-Z]([-a-zA-Z0-9]*[a-zA-Z0-9])?$ + type: string + name: + description: Name is the name of the referent. + maxLength: 253 + minLength: 1 + type: string + required: + - group + - kind + - name + type: object + requestHeaderModifier: + description: |- + RequestHeaderModifier defines a schema for a filter that modifies request + headers. + + + Support: Core + properties: + add: + description: |- + Add adds the given header(s) (name, value) to the request + before the action. It appends to any existing values associated + with the header name. + + + Input: + GET /foo HTTP/1.1 + my-header: foo + + + Config: + add: + - name: "my-header" + value: "bar,baz" + + + Output: + GET /foo HTTP/1.1 + my-header: foo,bar,baz + items: + description: HTTPHeader represents an HTTP Header name and value as defined by RFC 7230. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, the first entry with + an equivalent name MUST be considered for a match. Subsequent entries + with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + remove: + description: |- + Remove the given header(s) from the HTTP request before the action. The + value of Remove is a list of HTTP header names. Note that the header + names are case-insensitive (see + https://datatracker.ietf.org/doc/html/rfc2616#section-4.2). + + + Input: + GET /foo HTTP/1.1 + my-header1: foo + my-header2: bar + my-header3: baz + + + Config: + remove: ["my-header1", "my-header3"] + + + Output: + GET /foo HTTP/1.1 + my-header2: bar + items: + type: string + maxItems: 16 + type: array + x-kubernetes-list-type: set + set: + description: |- + Set overwrites the request with the given header (name, value) + before the action. + + + Input: + GET /foo HTTP/1.1 + my-header: foo + + + Config: + set: + - name: "my-header" + value: "bar" + + + Output: + GET /foo HTTP/1.1 + my-header: bar + items: + description: HTTPHeader represents an HTTP Header name and value as defined by RFC 7230. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, the first entry with + an equivalent name MUST be considered for a match. Subsequent entries + with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + type: object + requestMirror: + description: |- + RequestMirror defines a schema for a filter that mirrors requests. + Requests are sent to the specified destination, but responses from + that destination are ignored. + + + This filter can be used multiple times within the same rule. Note that + not all implementations will be able to support mirroring to multiple + backends. + + + Support: Extended + + + + properties: + backendRef: + description: |- + BackendRef references a resource where mirrored requests are sent. + + + Mirrored requests must be sent only to a single destination endpoint + within this BackendRef, irrespective of how many endpoints are present + within this BackendRef. + + + If the referent cannot be found, this BackendRef is invalid and must be + dropped from the Gateway. The controller must ensure the "ResolvedRefs" + condition on the Route status is set to `status: False` and not configure + this backend in the underlying implementation. + + + If there is a cross-namespace reference to an *existing* object + that is not allowed by a ReferenceGrant, the controller must ensure the + "ResolvedRefs" condition on the Route is set to `status: False`, + with the "RefNotPermitted" reason and not configure this backend in the + underlying implementation. + + + In either error case, the Message of the `ResolvedRefs` Condition + should be used to provide more detail about the problem. + + + Support: Extended for Kubernetes Service + + + Support: Implementation-specific for any other resource + properties: + group: + default: "" + description: |- + Group is the group of the referent. For example, "gateway.networking.k8s.io". + When unspecified or empty string, core API group is inferred. + maxLength: 253 + pattern: ^$|^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$ + type: string + kind: + default: Service + description: |- + Kind is the Kubernetes resource kind of the referent. For example + "Service". + + + Defaults to "Service" when not specified. + + + ExternalName services can refer to CNAME DNS records that may live + outside of the cluster and as such are difficult to reason about in + terms of conformance. They also may not be safe to forward to (see + CVE-2021-25740 for more information). Implementations SHOULD NOT + support ExternalName Services. + + + Support: Core (Services with a type other than ExternalName) + + + Support: Implementation-specific (Services with type ExternalName) + maxLength: 63 + minLength: 1 + pattern: ^[a-zA-Z]([-a-zA-Z0-9]*[a-zA-Z0-9])?$ + type: string + name: + description: Name is the name of the referent. + maxLength: 253 + minLength: 1 + type: string + namespace: + description: |- + Namespace is the namespace of the backend. When unspecified, the local + namespace is inferred. + + + Note that when a namespace different than the local namespace is specified, + a ReferenceGrant object is required in the referent namespace to allow that + namespace's owner to accept the reference. See the ReferenceGrant + documentation for details. + + + Support: Core + maxLength: 63 + minLength: 1 + pattern: ^[a-z0-9]([-a-z0-9]*[a-z0-9])?$ + type: string + port: + description: |- + Port specifies the destination port number to use for this resource. + Port is required when the referent is a Kubernetes Service. In this + case, the port number is the service port number, not the target port. + For other resources, destination port might be derived from the referent + resource or this field. + format: int32 + maximum: 65535 + minimum: 1 + type: integer + required: + - name + type: object + fraction: + description: |- + Fraction represents the fraction of requests that should be + mirrored to BackendRef. + + + Only one of Fraction or Percent may be specified. If neither field + is specified, 100% of requests will be mirrored. + + + + properties: + denominator: + default: 100 + format: int32 + minimum: 1 + type: integer + numerator: + format: int32 + minimum: 0 + type: integer + required: + - numerator + type: object + percent: + description: |- + Percent represents the percentage of requests that should be + mirrored to BackendRef. Its minimum value is 0 (indicating 0% of + requests) and its maximum value is 100 (indicating 100% of requests). + + + Only one of Fraction or Percent may be specified. If neither field + is specified, 100% of requests will be mirrored. + + + + format: int32 + maximum: 100 + minimum: 0 + type: integer + required: + - backendRef + type: object + requestRedirect: + description: |- + RequestRedirect defines a schema for a filter that responds to the + request with an HTTP redirection. + + + Support: Core + properties: + hostname: + description: |- + Hostname is the hostname to be used in the value of the `Location` + header in the response. + When empty, the hostname in the `Host` header of the request is used. + + + Support: Core + maxLength: 253 + minLength: 1 + pattern: ^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$ + type: string + path: + description: |- + Path defines parameters used to modify the path of the incoming request. + The modified path is then used to construct the `Location` header. When + empty, the request path is used as-is. + + + Support: Extended + properties: + replaceFullPath: + description: |- + ReplaceFullPath specifies the value with which to replace the full path + of a request during a rewrite or redirect. + maxLength: 1024 + type: string + replacePrefixMatch: + description: |- + ReplacePrefixMatch specifies the value with which to replace the prefix + match of a request during a rewrite or redirect. For example, a request + to "/foo/bar" with a prefix match of "/foo" and a ReplacePrefixMatch + of "/xyz" would be modified to "/xyz/bar". + + + Note that this matches the behavior of the PathPrefix match type. This + matches full path elements. A path element refers to the list of labels + in the path split by the `/` separator. When specified, a trailing `/` is + ignored. For example, the paths `/abc`, `/abc/`, and `/abc/def` would all + match the prefix `/abc`, but the path `/abcd` would not. + + + ReplacePrefixMatch is only compatible with a `PathPrefix` HTTPRouteMatch. + Using any other HTTPRouteMatch type on the same HTTPRouteRule will result in + the implementation setting the Accepted Condition for the Route to `status: False`. + + + Request Path | Prefix Match | Replace Prefix | Modified Path + -------------|--------------|----------------|---------- + /foo/bar | /foo | /xyz | /xyz/bar + /foo/bar | /foo | /xyz/ | /xyz/bar + /foo/bar | /foo/ | /xyz | /xyz/bar + /foo/bar | /foo/ | /xyz/ | /xyz/bar + /foo | /foo | /xyz | /xyz + /foo/ | /foo | /xyz | /xyz/ + /foo/bar | /foo | | /bar + /foo/ | /foo | | / + /foo | /foo | | / + /foo/ | /foo | / | / + /foo | /foo | / | / + maxLength: 1024 + type: string + type: + description: |- + Type defines the type of path modifier. Additional types may be + added in a future release of the API. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + enum: + - ReplaceFullPath + - ReplacePrefixMatch + type: string + required: + - type + type: object + port: + description: |- + Port is the port to be used in the value of the `Location` + header in the response. + + + If no port is specified, the redirect port MUST be derived using the + following rules: + + + * If redirect scheme is not-empty, the redirect port MUST be the well-known + port associated with the redirect scheme. Specifically "http" to port 80 + and "https" to port 443. If the redirect scheme does not have a + well-known port, the listener port of the Gateway SHOULD be used. + * If redirect scheme is empty, the redirect port MUST be the Gateway + Listener port. + + + Implementations SHOULD NOT add the port number in the 'Location' + header in the following cases: + + + * A Location header that will use HTTP (whether that is determined via + the Listener protocol or the Scheme field) _and_ use port 80. + * A Location header that will use HTTPS (whether that is determined via + the Listener protocol or the Scheme field) _and_ use port 443. + + + Support: Extended + format: int32 + maximum: 65535 + minimum: 1 + type: integer + scheme: + description: |- + Scheme is the scheme to be used in the value of the `Location` header in + the response. When empty, the scheme of the request is used. + + + Scheme redirects can affect the port of the redirect, for more information, + refer to the documentation for the port field of this filter. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + + + Support: Extended + enum: + - http + - https + type: string + statusCode: + default: 302 + description: |- + StatusCode is the HTTP status code to be used in response. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + + + Support: Core + enum: + - 301 + - 302 + type: integer + type: object + responseHeaderModifier: + description: |- + ResponseHeaderModifier defines a schema for a filter that modifies response + headers. + + + Support: Extended + properties: + add: + description: |- + Add adds the given header(s) (name, value) to the request + before the action. It appends to any existing values associated + with the header name. + + + Input: + GET /foo HTTP/1.1 + my-header: foo + + + Config: + add: + - name: "my-header" + value: "bar,baz" + + + Output: + GET /foo HTTP/1.1 + my-header: foo,bar,baz + items: + description: HTTPHeader represents an HTTP Header name and value as defined by RFC 7230. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, the first entry with + an equivalent name MUST be considered for a match. Subsequent entries + with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + remove: + description: |- + Remove the given header(s) from the HTTP request before the action. The + value of Remove is a list of HTTP header names. Note that the header + names are case-insensitive (see + https://datatracker.ietf.org/doc/html/rfc2616#section-4.2). + + + Input: + GET /foo HTTP/1.1 + my-header1: foo + my-header2: bar + my-header3: baz + + + Config: + remove: ["my-header1", "my-header3"] + + + Output: + GET /foo HTTP/1.1 + my-header2: bar + items: + type: string + maxItems: 16 + type: array + x-kubernetes-list-type: set + set: + description: |- + Set overwrites the request with the given header (name, value) + before the action. + + + Input: + GET /foo HTTP/1.1 + my-header: foo + + + Config: + set: + - name: "my-header" + value: "bar" + + + Output: + GET /foo HTTP/1.1 + my-header: bar + items: + description: HTTPHeader represents an HTTP Header name and value as defined by RFC 7230. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, the first entry with + an equivalent name MUST be considered for a match. Subsequent entries + with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + type: object + type: + description: |- + Type identifies the type of filter to apply. As with other API fields, + types are classified into three conformance levels: + + + - Core: Filter types and their corresponding configuration defined by + "Support: Core" in this package, e.g. "RequestHeaderModifier". All + implementations must support core filters. + + + - Extended: Filter types and their corresponding configuration defined by + "Support: Extended" in this package, e.g. "RequestMirror". Implementers + are encouraged to support extended filters. + + + - Implementation-specific: Filters that are defined and supported by + specific vendors. + In the future, filters showing convergence in behavior across multiple + implementations will be considered for inclusion in extended or core + conformance levels. Filter-specific configuration for such filters + is specified using the ExtensionRef field. `Type` should be set to + "ExtensionRef" for custom filters. + + + Implementers are encouraged to define custom implementation types to + extend the core API with implementation-specific behavior. + + + If a reference to a custom filter type cannot be resolved, the filter + MUST NOT be skipped. Instead, requests that would have been processed by + that filter MUST receive a HTTP error response. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + enum: + - RequestHeaderModifier + - ResponseHeaderModifier + - RequestMirror + - RequestRedirect + - URLRewrite + - ExtensionRef + type: string + urlRewrite: + description: |- + URLRewrite defines a schema for a filter that modifies a request during forwarding. + + + Support: Extended + properties: + hostname: + description: |- + Hostname is the value to be used to replace the Host header value during + forwarding. + + + Support: Extended + maxLength: 253 + minLength: 1 + pattern: ^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$ + type: string + path: + description: |- + Path defines a path rewrite. + + + Support: Extended + properties: + replaceFullPath: + description: |- + ReplaceFullPath specifies the value with which to replace the full path + of a request during a rewrite or redirect. + maxLength: 1024 + type: string + replacePrefixMatch: + description: |- + ReplacePrefixMatch specifies the value with which to replace the prefix + match of a request during a rewrite or redirect. For example, a request + to "/foo/bar" with a prefix match of "/foo" and a ReplacePrefixMatch + of "/xyz" would be modified to "/xyz/bar". + + + Note that this matches the behavior of the PathPrefix match type. This + matches full path elements. A path element refers to the list of labels + in the path split by the `/` separator. When specified, a trailing `/` is + ignored. For example, the paths `/abc`, `/abc/`, and `/abc/def` would all + match the prefix `/abc`, but the path `/abcd` would not. + + + ReplacePrefixMatch is only compatible with a `PathPrefix` HTTPRouteMatch. + Using any other HTTPRouteMatch type on the same HTTPRouteRule will result in + the implementation setting the Accepted Condition for the Route to `status: False`. + + + Request Path | Prefix Match | Replace Prefix | Modified Path + -------------|--------------|----------------|---------- + /foo/bar | /foo | /xyz | /xyz/bar + /foo/bar | /foo | /xyz/ | /xyz/bar + /foo/bar | /foo/ | /xyz | /xyz/bar + /foo/bar | /foo/ | /xyz/ | /xyz/bar + /foo | /foo | /xyz | /xyz + /foo/ | /foo | /xyz | /xyz/ + /foo/bar | /foo | | /bar + /foo/ | /foo | | / + /foo | /foo | | / + /foo/ | /foo | / | / + /foo | /foo | / | / + maxLength: 1024 + type: string + type: + description: |- + Type defines the type of path modifier. Additional types may be + added in a future release of the API. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + enum: + - ReplaceFullPath + - ReplacePrefixMatch + type: string + required: + - type + type: object + type: object + required: + - type + type: object + maxItems: 16 + type: array + matches: + description: |- + Matches define conditions used for matching the rule against incoming + HTTP requests. Each match is independent, i.e. this rule will be matched + if **any** one of the matches is satisfied. + + + For example, take the following matches configuration: + + + ``` + matches: + - path: + value: "/foo" + headers: + - name: "version" + value: "v2" + - path: + value: "/v2/foo" + ``` + + + For a request to match against this rule, a request must satisfy + EITHER of the two conditions: + + + - path prefixed with `/foo` AND contains the header `version: v2` + - path prefix of `/v2/foo` + + + See the documentation for HTTPRouteMatch on how to specify multiple + match conditions that should be ANDed together. + + + If no matches are specified, the default is a prefix + path match on "/", which has the effect of matching every + HTTP request. + + + Proxy or Load Balancer routing configuration generated from HTTPRoutes + MUST prioritize matches based on the following criteria, continuing on + ties. Across all rules specified on applicable Routes, precedence must be + given to the match having: + + + * "Exact" path match. + * "Prefix" path match with largest number of characters. + * Method match. + * Largest number of header matches. + * Largest number of query param matches. + + + Note: The precedence of RegularExpression path matches are implementation-specific. + + + If ties still exist across multiple Routes, matching precedence MUST be + determined in order of the following criteria, continuing on ties: + + + * The oldest Route based on creation timestamp. + * The Route appearing first in alphabetical order by + "{namespace}/{name}". + + + If ties still exist within an HTTPRoute, matching precedence MUST be granted + to the FIRST matching rule (in list order) with a match meeting the above + criteria. + + + When no rules matching a request have been successfully attached to the + parent a request is coming from, a HTTP 404 status code MUST be returned. + items: + properties: + headers: + description: |- + Headers specifies HTTP request header matchers. Multiple match values are + ANDed together, meaning, a request must match all the specified headers + to select the route. + items: + description: |- + HTTPHeaderMatch describes how to select a HTTP route by matching HTTP request + headers. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, only the first + entry with an equivalent name MUST be considered for a match. Subsequent + entries with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + + + When a header is repeated in an HTTP request, it is + implementation-specific behavior as to how this is represented. + Generally, proxies should follow the guidance from the RFC: + https://www.rfc-editor.org/rfc/rfc7230.html#section-3.2.2 regarding + processing a repeated header, with special handling for "Set-Cookie". + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + type: + default: Exact + description: |- + Type specifies how to match against the value of the header. + + + Support: Core (Exact) + + + Support: Implementation-specific (RegularExpression) + + + Since RegularExpression HeaderMatchType has implementation-specific + conformance, implementations can support POSIX, PCRE or any other dialects + of regular expressions. Please read the implementation's documentation to + determine the supported dialect. + enum: + - Exact + - RegularExpression + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + path: + description: Path specifies a HTTP request path matcher. + properties: + type: + default: PathPrefix + description: |- + Type specifies how to match against the path Value. + + + Support: Core (Exact, PathPrefix) + + + Support: Implementation-specific (RegularExpression) + enum: + - Exact + - PathPrefix + - RegularExpression + type: string + value: + default: / + description: Value of the HTTP path to match against. + maxLength: 1024 + type: string + type: object + queryParams: + description: |- + QueryParams specifies HTTP query parameter matchers. Multiple match + values are ANDed together, meaning, a request must match all the + specified query parameters to select the route. + + + Support: Extended + items: + description: |- + HTTPQueryParamMatch describes how to select a HTTP route by matching HTTP + query parameters. + properties: + name: + description: |- + Name is the name of the HTTP query param to be matched. This must be an + exact string match. (See + https://tools.ietf.org/html/rfc7230#section-2.7.3). + + + If multiple entries specify equivalent query param names, only the first + entry with an equivalent name MUST be considered for a match. Subsequent + entries with an equivalent query param name MUST be ignored. + + + If a query param is repeated in an HTTP request, the behavior is + purposely left undefined, since different data planes have different + capabilities. However, it is *recommended* that implementations should + match against the first value of the param if the data plane supports it, + as this behavior is expected in other load balancing contexts outside of + the Gateway API. + + + Users SHOULD NOT route traffic based on repeated query params to guard + themselves against potential differences in the implementations. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + type: + default: Exact + description: |- + Type specifies how to match against the value of the query parameter. + + + Support: Extended (Exact) + + + Support: Implementation-specific (RegularExpression) + + + Since RegularExpression QueryParamMatchType has Implementation-specific + conformance, implementations can support POSIX, PCRE or any other + dialects of regular expressions. Please read the implementation's + documentation to determine the supported dialect. + enum: + - Exact + - RegularExpression + type: string + value: + description: Value is the value of HTTP query param to be matched. + maxLength: 1024 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + type: object + maxItems: 8 + type: array + stableTraffic: + description: StableTraffic indicate the base traffic rule + properties: + filters: + description: |- + Filters define the filters that are applied to requests that match + this rule. + + + The effects of ordering of multiple behaviors are currently unspecified. + This can change in the future based on feedback during the alpha stage. + + + Conformance-levels at this level are defined based on the type of filter: + + + - ALL core filters MUST be supported by all implementations. + - Implementers are encouraged to support extended filters. + - Implementation-specific custom filters have no API guarantees across + implementations. + + + Specifying the same filter multiple times is not supported unless explicitly + indicated in the filter. + + + All filters are expected to be compatible with each other except for the + URLRewrite and RequestRedirect filters, which may not be combined. If an + implementation can not support other combinations of filters, they must clearly + document that limitation. In cases where incompatible or unsupported + filters are specified and cause the `Accepted` condition to be set to status + `False`, implementations may use the `IncompatibleFilters` reason to specify + this configuration error. + + + Support: Core + items: + description: |- + HTTPRouteFilter defines processing steps that must be completed during the + request or response lifecycle. HTTPRouteFilters are meant as an extension + point to express processing that may be done in Gateway implementations. Some + examples include request or response modification, implementing + authentication strategies, rate-limiting, and traffic shaping. API + guarantee/conformance is defined based on the type of the filter. + properties: + extensionRef: + description: |- + ExtensionRef is an optional, implementation-specific extension to the + "filter" behavior. For example, resource "myroutefilter" in group + "networking.example.net"). ExtensionRef MUST NOT be used for core and + extended filters. + + + This filter can be used multiple times within the same rule. + + + Support: Implementation-specific + properties: + group: + description: |- + Group is the group of the referent. For example, "gateway.networking.k8s.io". + When unspecified or empty string, core API group is inferred. + maxLength: 253 + pattern: ^$|^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$ + type: string + kind: + description: Kind is kind of the referent. For example "HTTPRoute" or "Service". + maxLength: 63 + minLength: 1 + pattern: ^[a-zA-Z]([-a-zA-Z0-9]*[a-zA-Z0-9])?$ + type: string + name: + description: Name is the name of the referent. + maxLength: 253 + minLength: 1 + type: string + required: + - group + - kind + - name + type: object + requestHeaderModifier: + description: |- + RequestHeaderModifier defines a schema for a filter that modifies request + headers. + + + Support: Core + properties: + add: + description: |- + Add adds the given header(s) (name, value) to the request + before the action. It appends to any existing values associated + with the header name. + + + Input: + GET /foo HTTP/1.1 + my-header: foo + + + Config: + add: + - name: "my-header" + value: "bar,baz" + + + Output: + GET /foo HTTP/1.1 + my-header: foo,bar,baz + items: + description: HTTPHeader represents an HTTP Header name and value as defined by RFC 7230. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, the first entry with + an equivalent name MUST be considered for a match. Subsequent entries + with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + remove: + description: |- + Remove the given header(s) from the HTTP request before the action. The + value of Remove is a list of HTTP header names. Note that the header + names are case-insensitive (see + https://datatracker.ietf.org/doc/html/rfc2616#section-4.2). + + + Input: + GET /foo HTTP/1.1 + my-header1: foo + my-header2: bar + my-header3: baz + + + Config: + remove: ["my-header1", "my-header3"] + + + Output: + GET /foo HTTP/1.1 + my-header2: bar + items: + type: string + maxItems: 16 + type: array + x-kubernetes-list-type: set + set: + description: |- + Set overwrites the request with the given header (name, value) + before the action. + + + Input: + GET /foo HTTP/1.1 + my-header: foo + + + Config: + set: + - name: "my-header" + value: "bar" + + + Output: + GET /foo HTTP/1.1 + my-header: bar + items: + description: HTTPHeader represents an HTTP Header name and value as defined by RFC 7230. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, the first entry with + an equivalent name MUST be considered for a match. Subsequent entries + with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + type: object + requestMirror: + description: |- + RequestMirror defines a schema for a filter that mirrors requests. + Requests are sent to the specified destination, but responses from + that destination are ignored. + + + This filter can be used multiple times within the same rule. Note that + not all implementations will be able to support mirroring to multiple + backends. + + + Support: Extended + + + + properties: + backendRef: + description: |- + BackendRef references a resource where mirrored requests are sent. + + + Mirrored requests must be sent only to a single destination endpoint + within this BackendRef, irrespective of how many endpoints are present + within this BackendRef. + + + If the referent cannot be found, this BackendRef is invalid and must be + dropped from the Gateway. The controller must ensure the "ResolvedRefs" + condition on the Route status is set to `status: False` and not configure + this backend in the underlying implementation. + + + If there is a cross-namespace reference to an *existing* object + that is not allowed by a ReferenceGrant, the controller must ensure the + "ResolvedRefs" condition on the Route is set to `status: False`, + with the "RefNotPermitted" reason and not configure this backend in the + underlying implementation. + + + In either error case, the Message of the `ResolvedRefs` Condition + should be used to provide more detail about the problem. + + + Support: Extended for Kubernetes Service + + + Support: Implementation-specific for any other resource + properties: + group: + default: "" + description: |- + Group is the group of the referent. For example, "gateway.networking.k8s.io". + When unspecified or empty string, core API group is inferred. + maxLength: 253 + pattern: ^$|^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$ + type: string + kind: + default: Service + description: |- + Kind is the Kubernetes resource kind of the referent. For example + "Service". + + + Defaults to "Service" when not specified. + + + ExternalName services can refer to CNAME DNS records that may live + outside of the cluster and as such are difficult to reason about in + terms of conformance. They also may not be safe to forward to (see + CVE-2021-25740 for more information). Implementations SHOULD NOT + support ExternalName Services. + + + Support: Core (Services with a type other than ExternalName) + + + Support: Implementation-specific (Services with type ExternalName) + maxLength: 63 + minLength: 1 + pattern: ^[a-zA-Z]([-a-zA-Z0-9]*[a-zA-Z0-9])?$ + type: string + name: + description: Name is the name of the referent. + maxLength: 253 + minLength: 1 + type: string + namespace: + description: |- + Namespace is the namespace of the backend. When unspecified, the local + namespace is inferred. + + + Note that when a namespace different than the local namespace is specified, + a ReferenceGrant object is required in the referent namespace to allow that + namespace's owner to accept the reference. See the ReferenceGrant + documentation for details. + + + Support: Core + maxLength: 63 + minLength: 1 + pattern: ^[a-z0-9]([-a-z0-9]*[a-z0-9])?$ + type: string + port: + description: |- + Port specifies the destination port number to use for this resource. + Port is required when the referent is a Kubernetes Service. In this + case, the port number is the service port number, not the target port. + For other resources, destination port might be derived from the referent + resource or this field. + format: int32 + maximum: 65535 + minimum: 1 + type: integer + required: + - name + type: object + fraction: + description: |- + Fraction represents the fraction of requests that should be + mirrored to BackendRef. + + + Only one of Fraction or Percent may be specified. If neither field + is specified, 100% of requests will be mirrored. + + + + properties: + denominator: + default: 100 + format: int32 + minimum: 1 + type: integer + numerator: + format: int32 + minimum: 0 + type: integer + required: + - numerator + type: object + percent: + description: |- + Percent represents the percentage of requests that should be + mirrored to BackendRef. Its minimum value is 0 (indicating 0% of + requests) and its maximum value is 100 (indicating 100% of requests). + + + Only one of Fraction or Percent may be specified. If neither field + is specified, 100% of requests will be mirrored. + + + + format: int32 + maximum: 100 + minimum: 0 + type: integer + required: + - backendRef + type: object + requestRedirect: + description: |- + RequestRedirect defines a schema for a filter that responds to the + request with an HTTP redirection. + + + Support: Core + properties: + hostname: + description: |- + Hostname is the hostname to be used in the value of the `Location` + header in the response. + When empty, the hostname in the `Host` header of the request is used. + + + Support: Core + maxLength: 253 + minLength: 1 + pattern: ^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$ + type: string + path: + description: |- + Path defines parameters used to modify the path of the incoming request. + The modified path is then used to construct the `Location` header. When + empty, the request path is used as-is. + + + Support: Extended + properties: + replaceFullPath: + description: |- + ReplaceFullPath specifies the value with which to replace the full path + of a request during a rewrite or redirect. + maxLength: 1024 + type: string + replacePrefixMatch: + description: |- + ReplacePrefixMatch specifies the value with which to replace the prefix + match of a request during a rewrite or redirect. For example, a request + to "/foo/bar" with a prefix match of "/foo" and a ReplacePrefixMatch + of "/xyz" would be modified to "/xyz/bar". + + + Note that this matches the behavior of the PathPrefix match type. This + matches full path elements. A path element refers to the list of labels + in the path split by the `/` separator. When specified, a trailing `/` is + ignored. For example, the paths `/abc`, `/abc/`, and `/abc/def` would all + match the prefix `/abc`, but the path `/abcd` would not. + + + ReplacePrefixMatch is only compatible with a `PathPrefix` HTTPRouteMatch. + Using any other HTTPRouteMatch type on the same HTTPRouteRule will result in + the implementation setting the Accepted Condition for the Route to `status: False`. + + + Request Path | Prefix Match | Replace Prefix | Modified Path + -------------|--------------|----------------|---------- + /foo/bar | /foo | /xyz | /xyz/bar + /foo/bar | /foo | /xyz/ | /xyz/bar + /foo/bar | /foo/ | /xyz | /xyz/bar + /foo/bar | /foo/ | /xyz/ | /xyz/bar + /foo | /foo | /xyz | /xyz + /foo/ | /foo | /xyz | /xyz/ + /foo/bar | /foo | | /bar + /foo/ | /foo | | / + /foo | /foo | | / + /foo/ | /foo | / | / + /foo | /foo | / | / + maxLength: 1024 + type: string + type: + description: |- + Type defines the type of path modifier. Additional types may be + added in a future release of the API. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + enum: + - ReplaceFullPath + - ReplacePrefixMatch + type: string + required: + - type + type: object + port: + description: |- + Port is the port to be used in the value of the `Location` + header in the response. + + + If no port is specified, the redirect port MUST be derived using the + following rules: + + + * If redirect scheme is not-empty, the redirect port MUST be the well-known + port associated with the redirect scheme. Specifically "http" to port 80 + and "https" to port 443. If the redirect scheme does not have a + well-known port, the listener port of the Gateway SHOULD be used. + * If redirect scheme is empty, the redirect port MUST be the Gateway + Listener port. + + + Implementations SHOULD NOT add the port number in the 'Location' + header in the following cases: + + + * A Location header that will use HTTP (whether that is determined via + the Listener protocol or the Scheme field) _and_ use port 80. + * A Location header that will use HTTPS (whether that is determined via + the Listener protocol or the Scheme field) _and_ use port 443. + + + Support: Extended + format: int32 + maximum: 65535 + minimum: 1 + type: integer + scheme: + description: |- + Scheme is the scheme to be used in the value of the `Location` header in + the response. When empty, the scheme of the request is used. + + + Scheme redirects can affect the port of the redirect, for more information, + refer to the documentation for the port field of this filter. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + + + Support: Extended + enum: + - http + - https + type: string + statusCode: + default: 302 + description: |- + StatusCode is the HTTP status code to be used in response. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + + + Support: Core + enum: + - 301 + - 302 + type: integer + type: object + responseHeaderModifier: + description: |- + ResponseHeaderModifier defines a schema for a filter that modifies response + headers. + + + Support: Extended + properties: + add: + description: |- + Add adds the given header(s) (name, value) to the request + before the action. It appends to any existing values associated + with the header name. + + + Input: + GET /foo HTTP/1.1 + my-header: foo + + + Config: + add: + - name: "my-header" + value: "bar,baz" + + + Output: + GET /foo HTTP/1.1 + my-header: foo,bar,baz + items: + description: HTTPHeader represents an HTTP Header name and value as defined by RFC 7230. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, the first entry with + an equivalent name MUST be considered for a match. Subsequent entries + with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + remove: + description: |- + Remove the given header(s) from the HTTP request before the action. The + value of Remove is a list of HTTP header names. Note that the header + names are case-insensitive (see + https://datatracker.ietf.org/doc/html/rfc2616#section-4.2). + + + Input: + GET /foo HTTP/1.1 + my-header1: foo + my-header2: bar + my-header3: baz + + + Config: + remove: ["my-header1", "my-header3"] + + + Output: + GET /foo HTTP/1.1 + my-header2: bar + items: + type: string + maxItems: 16 + type: array + x-kubernetes-list-type: set + set: + description: |- + Set overwrites the request with the given header (name, value) + before the action. + + + Input: + GET /foo HTTP/1.1 + my-header: foo + + + Config: + set: + - name: "my-header" + value: "bar" + + + Output: + GET /foo HTTP/1.1 + my-header: bar + items: + description: HTTPHeader represents an HTTP Header name and value as defined by RFC 7230. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, the first entry with + an equivalent name MUST be considered for a match. Subsequent entries + with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + type: object + type: + description: |- + Type identifies the type of filter to apply. As with other API fields, + types are classified into three conformance levels: + + + - Core: Filter types and their corresponding configuration defined by + "Support: Core" in this package, e.g. "RequestHeaderModifier". All + implementations must support core filters. + + + - Extended: Filter types and their corresponding configuration defined by + "Support: Extended" in this package, e.g. "RequestMirror". Implementers + are encouraged to support extended filters. + + + - Implementation-specific: Filters that are defined and supported by + specific vendors. + In the future, filters showing convergence in behavior across multiple + implementations will be considered for inclusion in extended or core + conformance levels. Filter-specific configuration for such filters + is specified using the ExtensionRef field. `Type` should be set to + "ExtensionRef" for custom filters. + + + Implementers are encouraged to define custom implementation types to + extend the core API with implementation-specific behavior. + + + If a reference to a custom filter type cannot be resolved, the filter + MUST NOT be skipped. Instead, requests that would have been processed by + that filter MUST receive a HTTP error response. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + enum: + - RequestHeaderModifier + - ResponseHeaderModifier + - RequestMirror + - RequestRedirect + - URLRewrite + - ExtensionRef + type: string + urlRewrite: + description: |- + URLRewrite defines a schema for a filter that modifies a request during forwarding. + + + Support: Extended + properties: + hostname: + description: |- + Hostname is the value to be used to replace the Host header value during + forwarding. + + + Support: Extended + maxLength: 253 + minLength: 1 + pattern: ^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$ + type: string + path: + description: |- + Path defines a path rewrite. + + + Support: Extended + properties: + replaceFullPath: + description: |- + ReplaceFullPath specifies the value with which to replace the full path + of a request during a rewrite or redirect. + maxLength: 1024 + type: string + replacePrefixMatch: + description: |- + ReplacePrefixMatch specifies the value with which to replace the prefix + match of a request during a rewrite or redirect. For example, a request + to "/foo/bar" with a prefix match of "/foo" and a ReplacePrefixMatch + of "/xyz" would be modified to "/xyz/bar". + + + Note that this matches the behavior of the PathPrefix match type. This + matches full path elements. A path element refers to the list of labels + in the path split by the `/` separator. When specified, a trailing `/` is + ignored. For example, the paths `/abc`, `/abc/`, and `/abc/def` would all + match the prefix `/abc`, but the path `/abcd` would not. + + + ReplacePrefixMatch is only compatible with a `PathPrefix` HTTPRouteMatch. + Using any other HTTPRouteMatch type on the same HTTPRouteRule will result in + the implementation setting the Accepted Condition for the Route to `status: False`. + + + Request Path | Prefix Match | Replace Prefix | Modified Path + -------------|--------------|----------------|---------- + /foo/bar | /foo | /xyz | /xyz/bar + /foo/bar | /foo | /xyz/ | /xyz/bar + /foo/bar | /foo/ | /xyz | /xyz/bar + /foo/bar | /foo/ | /xyz/ | /xyz/bar + /foo | /foo | /xyz | /xyz + /foo/ | /foo | /xyz | /xyz/ + /foo/bar | /foo | | /bar + /foo/ | /foo | | / + /foo | /foo | | / + /foo/ | /foo | / | / + /foo | /foo | / | / + maxLength: 1024 + type: string + type: + description: |- + Type defines the type of path modifier. Additional types may be + added in a future release of the API. + + + Note that values may be added to this enum, implementations + must ensure that unknown values will not cause a crash. + + + Unknown values here must result in the implementation setting the + Accepted Condition for the Route to `status: False`, with a + Reason of `UnsupportedValue`. + enum: + - ReplaceFullPath + - ReplacePrefixMatch + type: string + required: + - type + type: object + type: object + required: + - type + type: object + maxItems: 16 + type: array + matches: + description: |- + Matches define conditions used for matching the rule against incoming + HTTP requests. Each match is independent, i.e. this rule will be matched + if **any** one of the matches is satisfied. + + + For example, take the following matches configuration: + + + ``` + matches: + - path: + value: "/foo" + headers: + - name: "version" + value: "v2" + - path: + value: "/v2/foo" + ``` + + + For a request to match against this rule, a request must satisfy + EITHER of the two conditions: + + + - path prefixed with `/foo` AND contains the header `version: v2` + - path prefix of `/v2/foo` + + + See the documentation for HTTPRouteMatch on how to specify multiple + match conditions that should be ANDed together. + + + If no matches are specified, the default is a prefix + path match on "/", which has the effect of matching every + HTTP request. + + + Proxy or Load Balancer routing configuration generated from HTTPRoutes + MUST prioritize matches based on the following criteria, continuing on + ties. Across all rules specified on applicable Routes, precedence must be + given to the match having: + + + * "Exact" path match. + * "Prefix" path match with largest number of characters. + * Method match. + * Largest number of header matches. + * Largest number of query param matches. + + + Note: The precedence of RegularExpression path matches are implementation-specific. + + + If ties still exist across multiple Routes, matching precedence MUST be + determined in order of the following criteria, continuing on ties: + + + * The oldest Route based on creation timestamp. + * The Route appearing first in alphabetical order by + "{namespace}/{name}". + + + If ties still exist within an HTTPRoute, matching precedence MUST be granted + to the FIRST matching rule (in list order) with a match meeting the above + criteria. + + + When no rules matching a request have been successfully attached to the + parent a request is coming from, a HTTP 404 status code MUST be returned. + items: + properties: + headers: + description: |- + Headers specifies HTTP request header matchers. Multiple match values are + ANDed together, meaning, a request must match all the specified headers + to select the route. + items: + description: |- + HTTPHeaderMatch describes how to select a HTTP route by matching HTTP request + headers. + properties: + name: + description: |- + Name is the name of the HTTP Header to be matched. Name matching MUST be + case insensitive. (See https://tools.ietf.org/html/rfc7230#section-3.2). + + + If multiple entries specify equivalent header names, only the first + entry with an equivalent name MUST be considered for a match. Subsequent + entries with an equivalent header name MUST be ignored. Due to the + case-insensitivity of header names, "foo" and "Foo" are considered + equivalent. + + + When a header is repeated in an HTTP request, it is + implementation-specific behavior as to how this is represented. + Generally, proxies should follow the guidance from the RFC: + https://www.rfc-editor.org/rfc/rfc7230.html#section-3.2.2 regarding + processing a repeated header, with special handling for "Set-Cookie". + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + type: + default: Exact + description: |- + Type specifies how to match against the value of the header. + + + Support: Core (Exact) + + + Support: Implementation-specific (RegularExpression) + + + Since RegularExpression HeaderMatchType has implementation-specific + conformance, implementations can support POSIX, PCRE or any other dialects + of regular expressions. Please read the implementation's documentation to + determine the supported dialect. + enum: + - Exact + - RegularExpression + type: string + value: + description: Value is the value of HTTP Header to be matched. + maxLength: 4096 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + path: + description: Path specifies a HTTP request path matcher. + properties: + type: + default: PathPrefix + description: |- + Type specifies how to match against the path Value. + + + Support: Core (Exact, PathPrefix) + + + Support: Implementation-specific (RegularExpression) + enum: + - Exact + - PathPrefix + - RegularExpression + type: string + value: + default: / + description: Value of the HTTP path to match against. + maxLength: 1024 + type: string + type: object + queryParams: + description: |- + QueryParams specifies HTTP query parameter matchers. Multiple match + values are ANDed together, meaning, a request must match all the + specified query parameters to select the route. + + + Support: Extended + items: + description: |- + HTTPQueryParamMatch describes how to select a HTTP route by matching HTTP + query parameters. + properties: + name: + description: |- + Name is the name of the HTTP query param to be matched. This must be an + exact string match. (See + https://tools.ietf.org/html/rfc7230#section-2.7.3). + + + If multiple entries specify equivalent query param names, only the first + entry with an equivalent name MUST be considered for a match. Subsequent + entries with an equivalent query param name MUST be ignored. + + + If a query param is repeated in an HTTP request, the behavior is + purposely left undefined, since different data planes have different + capabilities. However, it is *recommended* that implementations should + match against the first value of the param if the data plane supports it, + as this behavior is expected in other load balancing contexts outside of + the Gateway API. + + + Users SHOULD NOT route traffic based on repeated query params to guard + themselves against potential differences in the implementations. + maxLength: 256 + minLength: 1 + pattern: ^[A-Za-z0-9!#$%&'*+\-.^_\x60|~]+$ + type: string + type: + default: Exact + description: |- + Type specifies how to match against the value of the query parameter. + + + Support: Extended (Exact) + + + Support: Implementation-specific (RegularExpression) + + + Since RegularExpression QueryParamMatchType has Implementation-specific + conformance, implementations can support POSIX, PCRE or any other + dialects of regular expressions. Please read the implementation's + documentation to determine the supported dialect. + enum: + - Exact + - RegularExpression + type: string + value: + description: Value is the value of HTTP query param to be matched. + maxLength: 1024 + minLength: 1 + type: string + required: + - name + - value + type: object + maxItems: 16 + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + type: object + maxItems: 8 + type: array type: object + weight: + description: Weight indicate how many percentage of traffic the canary pods should receive + format: int32 + maximum: 100 + minimum: 0 + type: integer type: object - x-kubernetes-map-type: atomic type: object + required: + - replicas + type: object + canaryV2: + description: |- + CanaryV2 defines the canary strategy for upgrade and operation + Mutually exclusive with Canary. + If specified, Canary must be empty. + properties: properties: additionalProperties: type: string description: Properties contains additional information for step type: object - replicas: - anyOf: - - type: integer - - type: string - description: Replicas is the replicas of the rollout task, which represents the number of pods to be upgraded - x-kubernetes-int-or-string: true + targets: + description: rollout targets defines desired target replicas + items: + properties: + matchTargets: + description: Match defines condition used for matching resource cross clusterset + properties: + names: + description: Names is a list of workload name + items: + description: CrossClusterObjectNameReference contains cluster and name reference to a k8s object + properties: + cluster: + description: Cluster indicates the name of cluster + type: string + name: + description: Name is the resource name + type: string + required: + - name + type: object + type: array + selector: + description: Selector is a label query over a set of resources, in this case resource + properties: + matchExpressions: + description: matchExpressions is a list of label selector requirements. The requirements are ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label key that the selector applies to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + type: object + replicaSlidingWindow: + anyOf: + - type: integer + - type: string + description: |- + ReplicaSlidingWindow used to control the number of pods that are allowed to be upgraded in + a sliding window for progressive rollout smoothly. + x-kubernetes-int-or-string: true + replicas: + anyOf: + - type: integer + - type: string + description: Replicas is the replicas of the rollout task, which represents the number of pods to be upgraded + x-kubernetes-int-or-string: true + required: + - replicas + type: object + type: array templateMetadataPatch: description: TemplateMetadataPatch defines a patch for workload template metadata. properties: @@ -4549,7 +9102,7 @@ spec: type: object type: object required: - - replicas + - targets type: object kind: description: |- diff --git a/docs/plans/kube-api-inline-batch-strategy-plan.md b/docs/plans/kube-api-inline-batch-strategy-plan.md new file mode 100644 index 0000000..6296ace --- /dev/null +++ b/docs/plans/kube-api-inline-batch-strategy-plan.md @@ -0,0 +1,134 @@ +# kube-api 仓库改动计划 - Rollout 支持集群维度精细化分批 + +## 概述 + +本计划目标是 RolloutSpec 支持内联策略配置。 + +## 改动范围 + +根据方案文档，kube-api 仓库仅需修改 Rollout 类型定义，新增内联策略字段。 + +--- + +## 步骤 1: 修改 RolloutSpec 类型定义 + +**目标**: 在 RolloutSpec 中添加 CanaryStrategy 和 BatchStrategy 内联字段 + +**文件**: `rollout/v1alpha1/rollout_types.go` + +**改动内容**: + +在 RolloutSpec 结构体中新增两个字段： + +```go +// RolloutSpec defines the desired state of Rollout +type RolloutSpec struct { + // Disabled means that rollout will not respond for new events. + // Default value is false. + Disabled bool `json:"disabled,omitempty"` + + // HistoryLimit defines the maximum number of completed rolloutRun + // history records to keep. + // The HistoryLimit can start from 0 (no retained RolloutRun history). + // When not set or set to math.MaxInt32, Rollout will keep all RolloutRun history records. + // + // +kubebuilder:default=10 + HistoryLimit *int32 `json:"historyLimit,omitempty"` + + // TriggerPolicy defines when rollout will be triggered + // + // +kubebuilder:default=Auto + TriggerPolicy RolloutTriggerPolicy `json:"triggerPolicy,omitempty"` + + // StrategyRef is a reference to a rollout strategy. + // Mutually exclusive with CanaryStrategy and BatchStrategy. + // If specified, CanaryStrategy and BatchStrategy must be empty. + // + // +kubebuilder:validation:Optional + StrategyRef string `json:"strategyRef,omitempty"` + + // CanaryStrategy defines the inline canary strategy. + // This allows specifying canary deployment details directly in Rollout + // without requiring a separate RolloutStrategy resource. + // Mutually exclusive with StrategyRef and BatchStrategy. + // + // +kubebuilder:validation:Optional + CanaryStrategy *RolloutRunCanaryStrategy `json:"canaryStrategy,omitempty"` + + // BatchStrategy defines the inline batch strategy. + // This allows specifying batch deployment details directly in Rollout + // without requiring a separate RolloutStrategy resource. + // Mutually exclusive with StrategyRef and CanaryStrategy. + // + // +kubebuilder:validation:Optional + BatchStrategy *RolloutRunBatchStrategy `json:"batchStrategy,omitempty"` + + // WorkloadRef is a reference to a kind of workloads + WorkloadRef WorkloadRef `json:"workloadRef,omitempty"` + + // TrafficTopologyRefs defines the networking traffic relationships between + // workloads, backend services, and routes. + TrafficTopologyRefs []string `json:"trafficTopologyRefs,omitempty"` +} +``` + +**依赖**: 无 + +**验收标准**: +- RolloutSpec 包含 `CanaryStrategy` 字段，类型为 `*RolloutRunCanaryStrategy` +- RolloutSpec 包含 `BatchStrategy` 字段，类型为 `*RolloutRunBatchStrategy` +- 字段使用正确的 json tag 和 kubebuilder validation +- 与 StrategyRef 字段互斥（validation 逻辑由 rollout 项目实现） + +--- + +## 步骤 2: 重新生成 CRD 文件 + +**目标**: 生成包含新字段的 CRD + +**命令**: +```bash +make generate +make manifests +``` + +**依赖**: 步骤 1 + +**验收标准**: +- Rollout CRD spec 中包含 `canaryStrategy` 字段定义 +- Rollout CRD spec 中包含 `batchStrategy` 字段定义 + +--- + +## 其他仓库改动说明 + +以下改动在 **rollout 项目**中实现，不在 kube-api 仓库： + +| 步骤 | 工作内容 | 项目 | +|------|----------|------| +| 1 | 在 RolloutSpec 中添加 CanaryStrategy 和 BatchStrategy 字段 | kube-api (本仓库) | +| 2 | 在 OneTimeStrategy 中新增 InlineBatch 字段 | rollout | +| 3 | 修改 validation 逻辑添加互斥校验 | rollout | +| 4 | 新增 inline_strategy.go 文件 | rollout | +| 5 | 修改 constructRolloutRun 支持内联策略 | rollout | +| 6 | 修改 rollout_controller 处理内联策略 | rollout | +| 7 | 修改 applyOneTimeStrategy 适配内联策略 | rollout | +| 8 | 重新生成 CRD 文件 | 多项目 | +| 9 | 编写测试 | rollout | + +--- + +## 关键类型说明 + +| 类型 | 来源 | 用途 | +|------|------|------| +| RolloutRunCanaryStrategy | 现有，kube-api | 内联 canary 策略 | +| RolloutRunBatchStrategy | 现有，kube-api | 内联 batch 策略 | +| RolloutRunStepTarget | 现有，kube-api | 批量中的目标配置（含 cluster、name、replicas） | + +这些类型已存在于 kube-api 仓库中，直接复用即可。 + +--- + +*计划创建时间: 2026-03-06* +*参考文档: Rollout支持集群维度精细化分批 - https://yuque.antfin.com/antcloud-paas/dp4wap/hi78idzzn4g8p1qb* \ No newline at end of file diff --git a/rollout/v1alpha1/rollout_types.go b/rollout/v1alpha1/rollout_types.go index 8ba6ac0..183d825 100644 --- a/rollout/v1alpha1/rollout_types.go +++ b/rollout/v1alpha1/rollout_types.go @@ -70,8 +70,7 @@ type RolloutSpec struct { // +kubebuilder:default=Auto TriggerPolicy RolloutTriggerPolicy `json:"triggerPolicy,omitempty"` - // StrategyRef is the reference to the rollout strategy - // + // StrategyRef is the reference to the rollout strategy. // +kubebuilder:validation:Required StrategyRef string `json:"strategyRef,omitempty"` diff --git a/rollout/v1alpha1/rolloutstrategy_types.go b/rollout/v1alpha1/rolloutstrategy_types.go index 350ed5e..bc476d5 100644 --- a/rollout/v1alpha1/rolloutstrategy_types.go +++ b/rollout/v1alpha1/rolloutstrategy_types.go @@ -41,6 +41,18 @@ type RolloutStrategy struct { // +optional Batch *BatchStrategy `json:"batch,omitempty"` + // CanaryV2 defines the canary strategy for upgrade and operation + // Mutually exclusive with Canary. + // If specified, Canary must be empty. + // +optional + CanaryV2 *CanaryStrategyV2 `json:"canaryV2,omitempty"` + + // BatchV2 is the batch strategy for upgrade and operation + // Mutually exclusive with Batch. + // If specified, Batch must be empty. + // +optional + BatchV2 *BatchStrategyV2 `json:"batchV2,omitempty"` + // Webhooks defines // +optional Webhooks []RolloutWebhook `json:"webhooks,omitempty"` @@ -67,6 +79,16 @@ type BatchStrategy struct { Toleration *TolerationStrategy `json:"toleration,omitempty"` } +// BatchStrategyV2 defines the v2 batch strategy +type BatchStrategyV2 struct { + // Batches define the order of phases to execute release in canary release + Batches []RolloutBatchStep `json:"batches,omitempty"` + + // Toleration is the toleration policy of the canary strategy + // +optional + Toleration *TolerationStrategy `json:"toleration,omitempty"` +} + // TolerationStrategy defines the toleration strategy type TolerationStrategy struct { // WorkloadFailureThreshold indicates how many failed pods can be tolerated in all upgraded pods of one workload. @@ -112,6 +134,23 @@ type RolloutStep struct { Properties map[string]string `json:"properties,omitempty"` } +type RolloutBatchStep struct { + // rollout targets defines desired target replicas + Targets []RolloutTargets `json:"targets"` + + // traffic strategy + // +optional + Traffic *TrafficStrategy `json:"traffic,omitempty"` + + // If set to true, the rollout will be paused before the step starts. + // +optional + Breakpoint bool `json:"breakpoint,omitempty"` + + // Properties contains additional information for step + // +optional + Properties map[string]string `json:"properties,omitempty"` +} + type CanaryStrategy struct { // Replicas is the replicas of the rollout task, which represents the number of pods to be upgraded Replicas intstr.IntOrString `json:"replicas"` @@ -132,3 +171,34 @@ type CanaryStrategy struct { // +optional TemplateMetadataPatch *MetadataPatch `json:"templateMetadataPatch,omitempty"` } + +type CanaryStrategyV2 struct { + // rollout targets defines desired target replicas + Targets []RolloutTargets `json:"targets"` + + // traffic strategy + // +optional + Traffic *TrafficStrategy `json:"traffic,omitempty"` + + // Properties contains additional information for step + // +optional + Properties map[string]string `json:"properties,omitempty"` + + // TemplateMetadataPatch defines a patch for workload template metadata. + // +optional + TemplateMetadataPatch *MetadataPatch `json:"templateMetadataPatch,omitempty"` +} + +type RolloutTargets struct { + // Replicas is the replicas of the rollout task, which represents the number of pods to be upgraded + Replicas intstr.IntOrString `json:"replicas"` + + // ReplicaSlidingWindow used to control the number of pods that are allowed to be upgraded in + // a sliding window for progressive rollout smoothly. + // +optional + ReplicaSlidingWindow *intstr.IntOrString `json:"replicaSlidingWindow,omitempty"` + + // Match defines condition used for matching resource cross clusterset + // +optional + Match *ResourceMatch `json:"matchTargets,omitempty"` +} diff --git a/rollout/v1alpha1/zz_generated.deepcopy.go b/rollout/v1alpha1/zz_generated.deepcopy.go index 23ca7c5..aa35f1d 100644 --- a/rollout/v1alpha1/zz_generated.deepcopy.go +++ b/rollout/v1alpha1/zz_generated.deepcopy.go @@ -380,6 +380,34 @@ func (in *BatchStrategy) DeepCopy() *BatchStrategy { return out } +// DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil. +func (in *BatchStrategyV2) DeepCopyInto(out *BatchStrategyV2) { + *out = *in + if in.Batches != nil { + in, out := &in.Batches, &out.Batches + *out = make([]RolloutBatchStep, len(*in)) + for i := range *in { + (*in)[i].DeepCopyInto(&(*out)[i]) + } + } + if in.Toleration != nil { + in, out := &in.Toleration, &out.Toleration + *out = new(TolerationStrategy) + (*in).DeepCopyInto(*out) + } + return +} + +// DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new BatchStrategyV2. +func (in *BatchStrategyV2) DeepCopy() *BatchStrategyV2 { + if in == nil { + return nil + } + out := new(BatchStrategyV2) + in.DeepCopyInto(out) + return out +} + // DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil. func (in *CanaryHTTPForwarding) DeepCopyInto(out *CanaryHTTPForwarding) { *out = *in @@ -474,6 +502,46 @@ func (in *CanaryStrategy) DeepCopy() *CanaryStrategy { return out } +// DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil. +func (in *CanaryStrategyV2) DeepCopyInto(out *CanaryStrategyV2) { + *out = *in + if in.Targets != nil { + in, out := &in.Targets, &out.Targets + *out = make([]RolloutTargets, len(*in)) + for i := range *in { + (*in)[i].DeepCopyInto(&(*out)[i]) + } + } + if in.Traffic != nil { + in, out := &in.Traffic, &out.Traffic + *out = new(TrafficStrategy) + (*in).DeepCopyInto(*out) + } + if in.Properties != nil { + in, out := &in.Properties, &out.Properties + *out = make(map[string]string, len(*in)) + for key, val := range *in { + (*out)[key] = val + } + } + if in.TemplateMetadataPatch != nil { + in, out := &in.TemplateMetadataPatch, &out.TemplateMetadataPatch + *out = new(MetadataPatch) + (*in).DeepCopyInto(*out) + } + return +} + +// DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new CanaryStrategyV2. +func (in *CanaryStrategyV2) DeepCopy() *CanaryStrategyV2 { + if in == nil { + return nil + } + out := new(CanaryStrategyV2) + in.DeepCopyInto(out) + return out +} + // DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil. func (in *CodeReasonMessage) DeepCopyInto(out *CodeReasonMessage) { *out = *in @@ -898,6 +966,41 @@ func (in *RolloutBatchStatus) DeepCopy() *RolloutBatchStatus { return out } +// DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil. +func (in *RolloutBatchStep) DeepCopyInto(out *RolloutBatchStep) { + *out = *in + if in.Targets != nil { + in, out := &in.Targets, &out.Targets + *out = make([]RolloutTargets, len(*in)) + for i := range *in { + (*in)[i].DeepCopyInto(&(*out)[i]) + } + } + if in.Traffic != nil { + in, out := &in.Traffic, &out.Traffic + *out = new(TrafficStrategy) + (*in).DeepCopyInto(*out) + } + if in.Properties != nil { + in, out := &in.Properties, &out.Properties + *out = make(map[string]string, len(*in)) + for key, val := range *in { + (*out)[key] = val + } + } + return +} + +// DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new RolloutBatchStep. +func (in *RolloutBatchStep) DeepCopy() *RolloutBatchStep { + if in == nil { + return nil + } + out := new(RolloutBatchStep) + in.DeepCopyInto(out) + return out +} + // DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil. func (in *RolloutList) DeepCopyInto(out *RolloutList) { *out = *in @@ -1398,6 +1501,16 @@ func (in *RolloutStrategy) DeepCopyInto(out *RolloutStrategy) { *out = new(BatchStrategy) (*in).DeepCopyInto(*out) } + if in.CanaryV2 != nil { + in, out := &in.CanaryV2, &out.CanaryV2 + *out = new(CanaryStrategyV2) + (*in).DeepCopyInto(*out) + } + if in.BatchV2 != nil { + in, out := &in.BatchV2, &out.BatchV2 + *out = new(BatchStrategyV2) + (*in).DeepCopyInto(*out) + } if in.Webhooks != nil { in, out := &in.Webhooks, &out.Webhooks *out = make([]RolloutWebhook, len(*in)) @@ -1459,6 +1572,33 @@ func (in *RolloutStrategyList) DeepCopyObject() runtime.Object { return nil } +// DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil. +func (in *RolloutTargets) DeepCopyInto(out *RolloutTargets) { + *out = *in + out.Replicas = in.Replicas + if in.ReplicaSlidingWindow != nil { + in, out := &in.ReplicaSlidingWindow, &out.ReplicaSlidingWindow + *out = new(intstr.IntOrString) + **out = **in + } + if in.Match != nil { + in, out := &in.Match, &out.Match + *out = new(ResourceMatch) + (*in).DeepCopyInto(*out) + } + return +} + +// DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new RolloutTargets. +func (in *RolloutTargets) DeepCopy() *RolloutTargets { + if in == nil { + return nil + } + out := new(RolloutTargets) + in.DeepCopyInto(out) + return out +} + // DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out. in must be non-nil. func (in *RolloutWebhook) DeepCopyInto(out *RolloutWebhook) { *out = *in