Could not load CFD-Isolated Building Wind Load

[hszhang1]

I have encountered a new problem with WE-UQ. When I opened EVT, I could open most of them. However, when I try to run CFD-Isolated Building Wind Load Simulation, WE-UQ suddenly crashed, and I could not open that. Could I know if there is any method to solve this problem?

[fmckenna]

were did you try and run it .. locally with 'RUN' or ' remotely with Run at DesignSafe'

[hszhang1]

Hi Frank,

I did not even run it yet. I opened EVT, and then try opening CFD-Isolated Building Wind Load Simulation on Load-Generator, the window could not pop up, and WE-UQ just quit. That means I could not open the load generator.

[fmckenna]

in your /Documents/WE-UQ/LocalWorkDir there is a folder IsolatedBuildingCFD .. can you delete the folder and try again .. also can you post the last 10~15 lines of the ~/Documents/WE-UQ/debug.log file .. thanks

[hszhang1]

Hi Frank,

Thanks! I delete the folder and try again. It worked this time. I did not know why previously it did not work. This is the last 10-15 lines of the log:

12:20:17.712 Debug: logFile: "C:/Users/Zhang/Documents\WE-UQ\debug.log" ()
12:20:17.716 Debug: "D:/WE-UQ_Windows_Download/WE-UQ_Windows_Download" -> -1 ()
12:20:18.356 Debug: SimCenterPreferences::getPython - scPython: "None" ()
12:20:18.379 Warning: QObject::connect: No such signal QComboBox::currentTextChanged() ()
12:20:18.381 Warning: QObject::connect: (sender name: 'StochasticLoadingModel') ()
12:20:18.418 Warning: QObject::connect: No such signal IsolatedBuildingCFD::errorMessage(QString) ()
12:20:18.421 Warning: QObject::connect: No such signal SurroundedBuildingCFD::errorMessage(QString) ()
12:20:18.451 Warning: QObject::connect: No such signal PLoMSimuWidget::queryEVT() ()
12:20:18.458 Warning: QObject::connect: No such slot UQ_EngineSelection::numModelsChanged(int) ()
12:20:18.463 Warning: QObject::connect: Cannot connect (nullptr)::onUQ_MethodUpdated(QString) to UQ_EngineSelection::methodSelectionChanged(QString) ()
12:20:18.464 Warning: QObject::connect: Cannot connect (nullptr)::onUQ_EngineChanged(QString) to UQ_EngineSelection::engineSelectionChanged(QString) ()
12:20:18.467 Warning: QObject::connect: No such signal LocalApplication::sendFatalMessage(QString) ()
12:20:18.467 Warning: QObject::connect: No such signal RemoteApplication::sendFatalMessage(QString) ()
12:20:18.468 Warning: QObject::connect: No such signal RemoteJobManager::closeDialog() ()
12:20:18.468 Warning: QObject::connect: No such signal TapisV3::closeDialog() ()
12:20:18.492 Debug: "Welcome to WE-UQ" ()
12:20:18.492 Debug: configFile: "D:/WE-UQ_Windows_Download/WE-UQ_Windows_Download\config.json" ()
12:20:18.494 Debug: application input options: QJsonObject({"outputLocation":{},"screenSize":"normal"}) ()
12:20:18.494 Debug: getConfigString: "screenSize" QJsonObject({"outputLocation":{},"screenSize":"normal"}) ()
12:20:18.500 Debug: getConfigOptionJSON: "outputLocation" QJsonObject({"outputLocation":{},"screenSize":"normal"}) ()
12:20:18.501 Warning: QObject::connect: No such slot WorkflowAppWE::infoMessage(QString) ()
12:20:18.749 Warning: Could not parse application stylesheet ()
12:20:18.943 Warning: Could not parse application stylesheet ()
12:20:23.314 Warning: QFSFileEngine::open: No file name specified ()
12:20:23.314 Debug: Failed to open file: "No file name specified" ()
12:20:25.963 Debug: getConfigString: "handleWorkDirsOnExit" QJsonObject({"outputLocation":{},"screenSize":"normal"}) ()
12:20:25.964 Debug: getConfigString: "handleWorkDirsOnExit" QJsonObject({"outputLocation":{},"screenSize":"normal"}) ()
12:20:26.226 Debug: SC_ToolDialog::Destructor ()
12:20:26.227 Debug: SC_RemoteAppTool::Destructor ()
12:20:26.227 Debug: SC_RemoteAppTool::Destructor ()

[fmckenna]

if you restart the application does it work still .. if so it is probably because of some mismatch between the files/ file contents between versions of the app .. if it still fails on your machine send the lines from debug.log again and I will see if i can see anything

[hszhang1]

Ok no problem I will restart the computer and see if the application works. I'll keep you posted. Thanks

[hszhang1]

Hi Frank,

This happens again when I finished running snappyhexmesh. When I finished this, I closed the application, I want to open again, and the load generator crashed. This is the debug.log

16:25:49.718 Debug: logFile: "C:/Users/Zhang/Documents\WE-UQ\debug.log" ()
16:25:49.722 Debug: "D:/WE-UQ_Windows_Download/WE-UQ_Windows_Download" -> -1 ()
16:25:50.141 Debug: SimCenterPreferences::getPython - scPython: "None" ()
16:25:50.163 Warning: QObject::connect: No such signal QComboBox::currentTextChanged() ()
16:25:50.164 Warning: QObject::connect: (sender name: 'StochasticLoadingModel') ()
16:25:50.198 Warning: QObject::connect: No such signal IsolatedBuildingCFD::errorMessage(QString) ()
16:25:50.198 Warning: QObject::connect: No such signal SurroundedBuildingCFD::errorMessage(QString) ()
16:25:50.228 Warning: QObject::connect: No such signal PLoMSimuWidget::queryEVT() ()
16:25:50.243 Warning: QObject::connect: No such slot UQ_EngineSelection::numModelsChanged(int) ()
16:25:50.243 Warning: QObject::connect: Cannot connect (nullptr)::onUQ_MethodUpdated(QString) to UQ_EngineSelection::methodSelectionChanged(QString) ()
16:25:50.243 Warning: QObject::connect: Cannot connect (nullptr)::onUQ_EngineChanged(QString) to UQ_EngineSelection::engineSelectionChanged(QString) ()
16:25:50.251 Warning: QObject::connect: No such signal LocalApplication::sendFatalMessage(QString) ()
16:25:50.251 Warning: QObject::connect: No such signal RemoteApplication::sendFatalMessage(QString) ()
16:25:50.251 Warning: QObject::connect: No such signal RemoteJobManager::closeDialog() ()
16:25:50.251 Warning: QObject::connect: No such signal TapisV3::closeDialog() ()
16:25:50.284 Debug: "Welcome to WE-UQ" ()
16:25:50.284 Debug: configFile: "D:/WE-UQ_Windows_Download/WE-UQ_Windows_Download\config.json" ()
16:25:50.290 Debug: application input options: QJsonObject({"outputLocation":{},"screenSize":"normal"}) ()
16:25:50.290 Debug: getConfigString: "screenSize" QJsonObject({"outputLocation":{},"screenSize":"normal"}) ()
16:25:50.299 Debug: getConfigOptionJSON: "outputLocation" QJsonObject({"outputLocation":{},"screenSize":"normal"}) ()
16:25:50.299 Warning: QObject::connect: No such slot WorkflowAppWE::infoMessage(QString) ()
16:25:50.540 Warning: Could not parse application stylesheet ()
16:25:50.718 Warning: Could not parse application stylesheet ()

[hszhang1]

Hi Frank,

This happens again when I tried to save the file. When I finished this, I closed the application, I want to open again, and the load generator crashed. This is the debug.log (I can still deleted the IsolatedBuildingCFD and rerun it, but it is time consuming)

16:25:49.718 Debug: logFile: "C:/Users/Zhang/Documents\WE-UQ\debug.log" ()
16:25:49.722 Debug: "D:/WE-UQ_Windows_Download/WE-UQ_Windows_Download" -> -1 ()
16:25:50.141 Debug: SimCenterPreferences::getPython - scPython: "None" ()
16:25:50.163 Warning: QObject::connect: No such signal QComboBox::currentTextChanged() ()
16:25:50.164 Warning: QObject::connect: (sender name: 'StochasticLoadingModel') ()
16:25:50.198 Warning: QObject::connect: No such signal IsolatedBuildingCFD::errorMessage(QString) ()
16:25:50.198 Warning: QObject::connect: No such signal SurroundedBuildingCFD::errorMessage(QString) ()
16:25:50.228 Warning: QObject::connect: No such signal PLoMSimuWidget::queryEVT() ()
16:25:50.243 Warning: QObject::connect: No such slot UQ_EngineSelection::numModelsChanged(int) ()
16:25:50.243 Warning: QObject::connect: Cannot connect (nullptr)::onUQ_MethodUpdated(QString) to UQ_EngineSelection::methodSelectionChanged(QString) ()
16:25:50.243 Warning: QObject::connect: Cannot connect (nullptr)::onUQ_EngineChanged(QString) to UQ_EngineSelection::engineSelectionChanged(QString) ()
16:25:50.251 Warning: QObject::connect: No such signal LocalApplication::sendFatalMessage(QString) ()
16:25:50.251 Warning: QObject::connect: No such signal RemoteApplication::sendFatalMessage(QString) ()
16:25:50.251 Warning: QObject::connect: No such signal RemoteJobManager::closeDialog() ()
16:25:50.251 Warning: QObject::connect: No such signal TapisV3::closeDialog() ()
16:25:50.284 Debug: "Welcome to WE-UQ" ()
16:25:50.284 Debug: configFile: "D:/WE-UQ_Windows_Download/WE-UQ_Windows_Download\config.json" ()
16:25:50.290 Debug: application input options: QJsonObject({"outputLocation":{},"screenSize":"normal"}) ()
16:25:50.290 Debug: getConfigString: "screenSize" QJsonObject({"outputLocation":{},"screenSize":"normal"}) ()
16:25:50.299 Debug: getConfigOptionJSON: "outputLocation" QJsonObject({"outputLocation":{},"screenSize":"normal"}) ()
16:25:50.299 Warning: QObject::connect: No such slot WorkflowAppWE::infoMessage(QString) ()
16:25:50.540 Warning: Could not parse application stylesheet ()
16:25:50.718 Warning: Could not parse application stylesheet ()