examples/tests update

Author: JAndrassy

examples/EthernetAdvancedChatServer/EthernetAdvancedChatServer.ino

@@ -9,46 +9,30 @@
 
 #include <Ethernet.h>
 
-// Enter a MAC address and IP address for your controller below.
-// The IP address will be dependent on your local network.
-// gateway and subnet are optional:
 byte mac[] = {
   0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED
 };
 
-// telnet defaults to port 23
-EthernetServer server(23);
+EthernetServer server(2323);
 
 EthernetClient clients[8];
 
 void setup() {
 
-  // initialize the Ethernet device
-  Ethernet.init(10);
-  Ethernet.begin(mac);
-
-  // Open serial communications and wait for port to open:
   Serial.begin(115200);
-  while (!Serial) {
-    ; // wait for serial port to connect. Needed for native USB port only
-  }
+  while (!Serial);
 
-  // Check for Ethernet hardware present
-  if (Ethernet.hardwareStatus() == EthernetNoHardware) {
-    Serial.println("Ethernet shield was not found.  Sorry, can't run without hardware. :(");
-    while (true) {
-      delay(1); // do nothing, no point running without Ethernet hardware
-    }
-  }
-  if (Ethernet.linkStatus() == LinkOFF) {
-    Serial.println("Ethernet cable is not connected.");
-  }
+  //  Ethernet.init(10);
+  Ethernet.begin(mac);
 
   // start listening for clients
   server.begin();
 
-  Serial.print("Chat server address:");
-  Serial.println(Ethernet.localIP());
+  IPAddress ip = Ethernet.localIP();
+  Serial.println();
+  Serial.print("To access the server, connect with Telnet client to ");
+  Serial.print(ip);
+  Serial.println(" 2323");
 }
 
 void loop() {

examples/EthernetPagerServer/EthernetPagerServer.ino

@@ -30,6 +30,7 @@ void setup() {
   Serial.begin(115200);
   while (!Serial);
 
+  //  Ethernet.init(10);
   Ethernet.begin(mac);
 
   server.begin();

examples/LegacyEthernetTest/LegacyEthernetTest.ino

@@ -14,7 +14,7 @@ void setup() {
   Serial.println();
 
 //	Ethernet.init(10);
-//  Ethernet.begin(mac, INADDR_NONE); // force hw init for some libraries
+//  Ethernet.begin(mac, IPAddress(182, 168, 0, 177)); // force hw init for some libraries
 
   if (Ethernet.hardwareStatus() == EthernetNoHardware) {
     Serial.println("Ethernet shield was not found.  Sorry, can't run without hardware. :(");

examples/WiFiTest/WiFiTest.ino

@@ -48,9 +48,12 @@ void setup() {
   Serial.print("Resolve IP for ");
   Serial.println(serverName);
   IPAddress resolvedIP;
-  WiFi.hostByName("www.google.com", resolvedIP);
-  Serial.print("\t");
-  Serial.println(resolvedIP);
+  if (WiFi.hostByName("www.google.com", resolvedIP) == 1) {
+    Serial.print("\t");
+    Serial.println(resolvedIP);
+  } else {
+    Serial.println("\t...ERROR");
+  }
   Serial.println();
 
   WiFi.disconnect();