Typo: "total relay 5.2 ..." etc. p.11 and notes about power supplies, Total Reload installation and loading times

[Twenkid]

The .uf2 image of the Reload is on ftp. You will need Flash drive formatted with FAT and with copy of
Total relay 5.2 from the ftp.

--> "need a Flash drive" ... Total replay 5.2

Observations: in Run mode, the power from my PC USB3 port didn't supply enough power and the Flash drive with which I tried (Kingston G3 8GB) couldn't start properly (it's with a light when active, which was just pulsating once in a few seconds) (I haven't tested that case with other drives).

This info also could be helpful:

Q: I have spare SD micro-SD cards, is it compatible with a USB adapter?
A: Yes, at least Earldom ET-OT25 micro-SD to USB worked.

Q: Can you reuse a Pen drive with other files or the drive should contain only the file: "Total Replay v5.2.hdv"?
A: Yes, you can have other files, just put this one in the root directory.

Q: How quickly it should load?
A: It depends on your pen drive. With a decent one it may take a few seconds to show the initial screen with the games and then switch the games in a moment. However note that if you use a slow and overloaded drive it may take many minutes to load.

[Twenkid]

Tested: Using the SD-card to USB adapter also required a dedicated power source, at least my PC's port didn't boot the system.