From 8444b340a2c8cca23ecb89211ee0d37398d75736 Mon Sep 17 00:00:00 2001
From: Josh McVey <yersh13@gmail.com>
Date: Fri, 17 Jan 2025 15:50:51 -0600
Subject: [PATCH] chore(app): locize fuzzy tags removed

---
 app/src/assets/localization/en/anonymous.json |  2 +-
 .../assets/localization/en/app_settings.json  |  2 +-
 app/src/assets/localization/en/branded.json   |  2 +-
 .../localization/en/change_pipette.json       |  2 +-
 .../localization/en/device_details.json       |  2 +-
 .../localization/en/device_settings.json      |  2 +-
 .../localization/en/devices_landing.json      |  2 +-
 .../localization/en/drop_tip_wizard.json      |  2 +-
 .../localization/en/error_recovery.json       |  2 +-
 .../localization/en/firmware_update.json      |  2 +-
 .../localization/en/gripper_wizard_flows.json |  2 +-
 .../assets/localization/en/heater_shaker.json |  2 +-
 .../localization/en/incompatible_modules.json |  2 +-
 .../en/instruments_dashboard.json             |  2 +-
 .../localization/en/labware_details.json      |  2 +-
 .../localization/en/labware_landing.json      |  2 +-
 .../en/labware_position_check.json            |  2 +-
 .../localization/en/module_wizard_flows.json  |  2 +-
 .../localization/en/pipette_wizard_flows.json |  2 +-
 .../en/protocol_command_text.json             |  2 +-
 .../localization/en/protocol_details.json     |  2 +-
 .../assets/localization/en/protocol_info.json |  2 +-
 .../assets/localization/en/protocol_list.json |  2 +-
 .../localization/en/protocol_setup.json       |  2 +-
 .../localization/en/quick_transfer.json       |  2 +-
 .../localization/en/robot_calibration.json    |  2 +-
 .../localization/en/robot_controls.json       |  2 +-
 .../assets/localization/en/run_details.json   |  2 +-
 app/src/assets/localization/en/shared.json    |  2 +-
 .../localization/en/top_navigation.json       |  2 +-
 app/src/assets/localization/zh/anonymous.json |  4 ++--
 .../assets/localization/zh/app_settings.json  | 23 ++++++++++++++++++-
 app/src/assets/localization/zh/branded.json   |  2 +-
 .../localization/zh/change_pipette.json       |  2 +-
 .../localization/zh/device_details.json       |  2 +-
 .../localization/zh/device_settings.json      |  2 +-
 .../localization/zh/devices_landing.json      |  2 +-
 .../localization/zh/drop_tip_wizard.json      |  2 +-
 .../localization/zh/error_recovery.json       |  2 +-
 .../localization/zh/firmware_update.json      |  2 +-
 .../localization/zh/gripper_wizard_flows.json |  2 +-
 .../assets/localization/zh/heater_shaker.json |  2 +-
 .../localization/zh/incompatible_modules.json |  2 +-
 .../zh/instruments_dashboard.json             |  2 +-
 .../localization/zh/labware_details.json      |  2 +-
 .../localization/zh/labware_landing.json      |  2 +-
 .../zh/labware_position_check.json            |  2 +-
 .../localization/zh/module_wizard_flows.json  |  2 +-
 .../localization/zh/pipette_wizard_flows.json |  2 +-
 .../zh/protocol_command_text.json             |  2 +-
 .../localization/zh/protocol_details.json     |  2 +-
 .../assets/localization/zh/protocol_info.json |  2 +-
 .../assets/localization/zh/protocol_list.json |  2 +-
 .../localization/zh/protocol_setup.json       |  2 +-
 .../localization/zh/quick_transfer.json       |  2 +-
 .../localization/zh/robot_calibration.json    |  2 +-
 .../localization/zh/robot_controls.json       |  2 +-
 .../assets/localization/zh/run_details.json   |  2 +-
 app/src/assets/localization/zh/shared.json    |  2 +-
 .../localization/zh/top_navigation.json       |  2 +-
 60 files changed, 82 insertions(+), 61 deletions(-)

diff --git a/app/src/assets/localization/en/anonymous.json b/app/src/assets/localization/en/anonymous.json
index bcfb90dc7eb..f9a6d018ac8 100644
--- a/app/src/assets/localization/en/anonymous.json
+++ b/app/src/assets/localization/en/anonymous.json
@@ -81,4 +81,4 @@
   "want_to_help_out": "Want to help out?",
   "welcome_title": "Welcome!",
   "why_use_lpc": "Labware Position Check is intended to correct for minor variances. Don't use Labware Position Check to compensate for large positional adjustments. Needing to set large labware offsets could indicate a problem with robot calibration."
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/app_settings.json b/app/src/assets/localization/en/app_settings.json
index 540df5ef394..2ee30fe778d 100644
--- a/app/src/assets/localization/en/app_settings.json
+++ b/app/src/assets/localization/en/app_settings.json
@@ -120,4 +120,4 @@
   "view_adapter_info": "view adapter info",
   "view_software_update": "View software update",
   "view_update": "View Update"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/branded.json b/app/src/assets/localization/en/branded.json
index 42c22baa8ad..cea8d46076f 100644
--- a/app/src/assets/localization/en/branded.json
+++ b/app/src/assets/localization/en/branded.json
@@ -81,4 +81,4 @@
   "want_to_help_out": "Want to help out Opentrons?",
   "welcome_title": "Welcome to your Opentrons Flex!",
   "why_use_lpc": "Labware Position Check is intended to correct for minor variances. Opentrons does not recommend using Labware Position Check to compensate for large positional adjustments. Needing to set large labware offsets could indicate a problem with robot calibration."
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/change_pipette.json b/app/src/assets/localization/en/change_pipette.json
index f63445ea779..213bcab340a 100644
--- a/app/src/assets/localization/en/change_pipette.json
+++ b/app/src/assets/localization/en/change_pipette.json
@@ -49,4 +49,4 @@
   "unable_to_detect_pipette": "Unable to detect {{pipette}}",
   "up": "up",
   "use_attached_pipette": "Use attached pipette"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/device_details.json b/app/src/assets/localization/en/device_details.json
index f394a9a9ac8..155cb27fd12 100644
--- a/app/src/assets/localization/en/device_details.json
+++ b/app/src/assets/localization/en/device_details.json
@@ -195,4 +195,4 @@
   "welcome_modal_description": "A place to run protocols, manage your instruments, and view robot status.",
   "welcome_to_your_dashboard": "Welcome to your dashboard!",
   "yes_update_now": "Yes, update now"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/device_settings.json b/app/src/assets/localization/en/device_settings.json
index e0a199fbee4..ab6ad59b39b 100644
--- a/app/src/assets/localization/en/device_settings.json
+++ b/app/src/assets/localization/en/device_settings.json
@@ -362,4 +362,4 @@
   "you_should_not_downgrade": "You should not downgrade to a software version released before the manufacture date of your robot or any attached hardware.",
   "your_mac_address_is": "Your MAC Address is {{macAddress}}",
   "your_robot_is_ready_to_go": "Your robot is ready to go."
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/devices_landing.json b/app/src/assets/localization/en/devices_landing.json
index 1ff5ef11fd6..322b9cf0415 100644
--- a/app/src/assets/localization/en/devices_landing.json
+++ b/app/src/assets/localization/en/devices_landing.json
@@ -44,4 +44,4 @@
   "use_usb_cable_for_new_robot": "When setting up a new robot, use the included USB cable to connect for the first time.",
   "wait_after_connecting": "Wait for a minute after connecting the robot to the computer",
   "why_is_this_robot_unavailable": "Why is this robot unavailable?"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/drop_tip_wizard.json b/app/src/assets/localization/en/drop_tip_wizard.json
index e384ccf971c..6096972cbd3 100644
--- a/app/src/assets/localization/en/drop_tip_wizard.json
+++ b/app/src/assets/localization/en/drop_tip_wizard.json
@@ -48,4 +48,4 @@
   "where_to_blowout": "Where do you want to blow out the aspirated liquid?",
   "where_to_drop_tips": "Where do you want to drop the attached tips?",
   "yes_blow_out_liquid": "Yes, choose blowout location"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/error_recovery.json b/app/src/assets/localization/en/error_recovery.json
index e4e1b5164eb..0c86da6d415 100644
--- a/app/src/assets/localization/en/error_recovery.json
+++ b/app/src/assets/localization/en/error_recovery.json
@@ -122,4 +122,4 @@
   "view_error_details": "View error details",
   "view_recovery_options": "View recovery options",
   "you_can_still_drop_tips": "You can still drop the attached tips before proceeding to tip selection."
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/firmware_update.json b/app/src/assets/localization/en/firmware_update.json
index 5d543032e12..6c1a14e023d 100644
--- a/app/src/assets/localization/en/firmware_update.json
+++ b/app/src/assets/localization/en/firmware_update.json
@@ -14,4 +14,4 @@
   "update_firmware": "Update firmware",
   "update_needed": "Instrument firmware update needed",
   "updating_firmware": "Updating {{subsystem}} firmware..."
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/gripper_wizard_flows.json b/app/src/assets/localization/en/gripper_wizard_flows.json
index 929627bf064..e5ea9a6cb56 100644
--- a/app/src/assets/localization/en/gripper_wizard_flows.json
+++ b/app/src/assets/localization/en/gripper_wizard_flows.json
@@ -34,4 +34,4 @@
   "stand_back_gripper_is_calibrating": "Stand back, gripper is calibrating",
   "try_again": "Try again",
   "unable_to_detect_gripper": "Unable to detect Gripper"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/heater_shaker.json b/app/src/assets/localization/en/heater_shaker.json
index 0eec55e6a11..2a2ce84cd67 100644
--- a/app/src/assets/localization/en/heater_shaker.json
+++ b/app/src/assets/localization/en/heater_shaker.json
@@ -45,4 +45,4 @@
   "troubleshoot_step_1": "Return to Step 1 to see instructions for securing the module to the deck.",
   "troubleshoot_step_3": "Return to Step 3 to see instructions for securing the thermal adapter to the module.",
   "troubleshooting": "Troubleshooting"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/incompatible_modules.json b/app/src/assets/localization/en/incompatible_modules.json
index 6829c971d24..f8c20b29a22 100644
--- a/app/src/assets/localization/en/incompatible_modules.json
+++ b/app/src/assets/localization/en/incompatible_modules.json
@@ -4,4 +4,4 @@
   "needs_your_assistance": "{{robot_name}} needs your assistance",
   "remove_before_running_protocol": "Remove the following hardware before running a protocol:",
   "remove_before_using": "You must remove incompatible modules before using this robot."
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/instruments_dashboard.json b/app/src/assets/localization/en/instruments_dashboard.json
index 6c58e39adbf..081be65aa40 100644
--- a/app/src/assets/localization/en/instruments_dashboard.json
+++ b/app/src/assets/localization/en/instruments_dashboard.json
@@ -7,4 +7,4 @@
   "pipette_calibrations_differ": "<bold>Pipette recalibration recommended</bold> The attached pipettes have very different calibration values. When properly calibrated, the values should be similar.",
   "recalibrate": "recalibrate",
   "serial_number": "serial number"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/labware_details.json b/app/src/assets/localization/en/labware_details.json
index ef1b786d666..b6c182ac321 100644
--- a/app/src/assets/localization/en/labware_details.json
+++ b/app/src/assets/localization/en/labware_details.json
@@ -30,4 +30,4 @@
   "y_offset": "y-offset",
   "y_size": "y-size",
   "y_spacing": "y-spacing"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/labware_landing.json b/app/src/assets/localization/en/labware_landing.json
index 3780788b4ee..4b6e593c979 100644
--- a/app/src/assets/localization/en/labware_landing.json
+++ b/app/src/assets/localization/en/labware_landing.json
@@ -25,4 +25,4 @@
   "show_in_folder": "Show in folder",
   "unable_to_upload": "Unable to upload file",
   "yes_delete_def": "Yes, delete definition"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/labware_position_check.json b/app/src/assets/localization/en/labware_position_check.json
index 3d4e83fe706..a06cb485533 100644
--- a/app/src/assets/localization/en/labware_position_check.json
+++ b/app/src/assets/localization/en/labware_position_check.json
@@ -113,4 +113,4 @@
   "view_current_offsets": "view current offsets",
   "view_data": "View data",
   "what_is_labware_offset_data": "What is labware offset data?"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/module_wizard_flows.json b/app/src/assets/localization/en/module_wizard_flows.json
index 2ca733e2725..0d373813961 100644
--- a/app/src/assets/localization/en/module_wizard_flows.json
+++ b/app/src/assets/localization/en/module_wizard_flows.json
@@ -44,4 +44,4 @@
   "stand_back_robot_in_motion": "Stand back, robot is in motion",
   "start_setup": "Start setup",
   "successfully_calibrated": "{{module}} successfully calibrated"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/pipette_wizard_flows.json b/app/src/assets/localization/en/pipette_wizard_flows.json
index 02b186d4026..e7643c17fa4 100644
--- a/app/src/assets/localization/en/pipette_wizard_flows.json
+++ b/app/src/assets/localization/en/pipette_wizard_flows.json
@@ -88,4 +88,4 @@
   "waste_chute_warning": "If the waste chute is installed, remove it from the deck plate adapter before proceeding.",
   "wrong_pip": "wrong instrument installed",
   "z_axis_still_attached": "z-axis screw still secure"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/protocol_command_text.json b/app/src/assets/localization/en/protocol_command_text.json
index c3620eac904..31bee621833 100644
--- a/app/src/assets/localization/en/protocol_command_text.json
+++ b/app/src/assets/localization/en/protocol_command_text.json
@@ -97,4 +97,4 @@
   "waiting_to_reach_temp_module": "Waiting for Temperature Module to reach {{temp}}",
   "waste_chute": "Waste Chute",
   "with_reference_of": "with reference of {{wavelength}} nm"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/protocol_details.json b/app/src/assets/localization/en/protocol_details.json
index e13d929b663..b2bcf5366e0 100644
--- a/app/src/assets/localization/en/protocol_details.json
+++ b/app/src/assets/localization/en/protocol_details.json
@@ -95,4 +95,4 @@
   "value_out_of_range": "Value must be between {{min}}-{{max}}",
   "view_run_details": "View run details",
   "view_unavailable_robots": "View unavailable robots on the Devices page"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/protocol_info.json b/app/src/assets/localization/en/protocol_info.json
index 9278d55361e..364684bd47f 100644
--- a/app/src/assets/localization/en/protocol_info.json
+++ b/app/src/assets/localization/en/protocol_info.json
@@ -86,4 +86,4 @@
   "upload": "Upload",
   "upload_and_simulate": "Open a protocol to run on {{robot_name}}",
   "valid_file_types": "Valid file types: Python files (.py) or Protocol Designer files (.json)"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/protocol_list.json b/app/src/assets/localization/en/protocol_list.json
index bfc177829c5..92a051f6987 100644
--- a/app/src/assets/localization/en/protocol_list.json
+++ b/app/src/assets/localization/en/protocol_list.json
@@ -23,4 +23,4 @@
   "this_protocol_will_be_trashed": "This protocol will be moved to this computer’s trash and may be unrecoverable.",
   "updated": "Updated",
   "yes_delete_this_protocol": "Yes, delete protocol"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/protocol_setup.json b/app/src/assets/localization/en/protocol_setup.json
index d740eec25a1..ae0b19e39a4 100644
--- a/app/src/assets/localization/en/protocol_setup.json
+++ b/app/src/assets/localization/en/protocol_setup.json
@@ -313,4 +313,4 @@
   "what_labware_offset_is": "A Labware Offset is a type of positional adjustment that accounts for small, real-world variances in the overall position of the labware on a robot’s deck. Labware Offset data is unique to a specific combination of labware definition, deck slot, and robot.",
   "with_the_chosen_value": "With the chosen values, the following error occurred:",
   "you_havent_confirmed": "You haven't confirmed the {{missingSteps}} yet. Ensure these are correct before proceeding to run the protocol."
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/quick_transfer.json b/app/src/assets/localization/en/quick_transfer.json
index 42717e3a1b6..0e62adc24aa 100644
--- a/app/src/assets/localization/en/quick_transfer.json
+++ b/app/src/assets/localization/en/quick_transfer.json
@@ -156,4 +156,4 @@
   "well_selection": "Well selection",
   "wells": "wells",
   "will_be_deleted": "<strong>{{transferName}}</strong> will be permanently deleted."
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/robot_calibration.json b/app/src/assets/localization/en/robot_calibration.json
index a8333470d94..46bd24d1774 100644
--- a/app/src/assets/localization/en/robot_calibration.json
+++ b/app/src/assets/localization/en/robot_calibration.json
@@ -130,4 +130,4 @@
   "using_current_calibrations": "Using current calibrations.",
   "you_can_remove_cal_block": "You can remove the Calibration Block from the deck now.",
   "you_will_need": "You will need:"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/robot_controls.json b/app/src/assets/localization/en/robot_controls.json
index cba7f31410e..026461358dc 100644
--- a/app/src/assets/localization/en/robot_controls.json
+++ b/app/src/assets/localization/en/robot_controls.json
@@ -11,4 +11,4 @@
   "restart_description": "Restart robot.",
   "restart_label": "Restart robot",
   "title": "robot controls"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/run_details.json b/app/src/assets/localization/en/run_details.json
index 98443901364..34fe4e79627 100644
--- a/app/src/assets/localization/en/run_details.json
+++ b/app/src/assets/localization/en/run_details.json
@@ -162,4 +162,4 @@
   "view_error_details": "View error details",
   "view_warning_details": "View warning details",
   "warning_details": "Warning details"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/shared.json b/app/src/assets/localization/en/shared.json
index 6ea0f44ab7a..4f9e3ff054a 100644
--- a/app/src/assets/localization/en/shared.json
+++ b/app/src/assets/localization/en/shared.json
@@ -83,4 +83,4 @@
   "view_latest_release_notes": "View latest release notes on",
   "yes": "yes",
   "you_will_need": "You will need:"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/en/top_navigation.json b/app/src/assets/localization/en/top_navigation.json
index c3391804a59..5a550abc83b 100644
--- a/app/src/assets/localization/en/top_navigation.json
+++ b/app/src/assets/localization/en/top_navigation.json
@@ -22,4 +22,4 @@
   "run": "run",
   "run_details": "Run Details",
   "settings": "Settings"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/anonymous.json b/app/src/assets/localization/zh/anonymous.json
index 7abd8f08615..4759617fa45 100644
--- a/app/src/assets/localization/zh/anonymous.json
+++ b/app/src/assets/localization/zh/anonymous.json
@@ -71,7 +71,7 @@
   "storage_limit_reached_description": "您的工作站已达到可存储的快速移液数量上限。在创建新的快速移液之前，您必须删除一个现有的快速移液。",
   "system_language_preferences_update_description": "您系统的语言最近已更新。您想使用更新后的语言作为应用的默认语言吗？",
   "these_are_advanced_settings": "<block>这些是高级设置。请勿在没有支持团队帮助的情况下尝试调整这些设置。更改这些设置可能会影响您的移液器寿命。</block><block>这些设置不会覆盖协议中定义的任何移液器设置。</block>",
-  "u2e_driver_description": "OT-2 通过此适配器，使用 USB 连接 Opentrons APP。",
+  "u2e_driver_description": "testing, not correct",
   "unexpected_error": "发生意外错误。",
   "update_requires_restarting_app": "更新需要重新启动应用程序。",
   "update_robot_software_description": "绕过自动更新过程并手动更新工作站软件",
@@ -81,4 +81,4 @@
   "want_to_help_out": "想要帮助吗？",
   "welcome_title": "欢迎！",
   "why_use_lpc": "耗材位置校准旨在纠正微小的偏差，请不要使用该校准方式来进行较大的位置补偿调整。如果需要进行较大调整的耗材数据校准可能表明工作站的校准存在问题。"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/app_settings.json b/app/src/assets/localization/zh/app_settings.json
index 035963eacaa..553dae16d1d 100644
--- a/app/src/assets/localization/zh/app_settings.json
+++ b/app/src/assets/localization/zh/app_settings.json
@@ -2,8 +2,11 @@
   "__dev_internal__enableLabwareCreator": "启用应用实验耗材创建器",
   "__dev_internal__enableRunNotes": "在协议运行期间显示备注",
   "__dev_internal__forceHttpPolling": "强制轮询所有网络请求，而不是使用MQTT",
+  "__dev_internal__lpcRedesign": "LPC 重新设计",
   "__dev_internal__protocolStats": "协议统计",
   "__dev_internal__protocolTimeline": "协议时间线",
+  "__dev_internal__reactQueryDevtools": "启用开发者工具",
+  "__dev_internal__reactScan": "启用 React 组件扫描",
   "add_folder_button": "添加实验耗材源文件夹",
   "add_ip_button": "添加",
   "add_ip_error": "输入IP地址或主机名",
@@ -14,11 +17,14 @@
   "additional_labware_folder_title": "其他定制实验耗材源文件夹",
   "advanced": "高级",
   "app_changes": "应用程序更改于",
+  "app_language_description": "应用的所有功能界面将使用所选语言显示，但协议和用户生成的内容（如文本或文件）将保持原有语言，不会随语言设置而改变。",
+  "app_language_preferences": "应用程序语言偏好设置",
   "app_settings": "应用设置",
   "bug_fixes": "错误修复",
   "cal_block": "始终使用校准块进行校准",
   "change_folder_button": "更改实验耗材源文件夹",
   "channel": "通道",
+  "choose_your_language": "选择语言",
   "clear_confirm": "清除不可用的工作站",
   "clear_robots_button": "清除不可用工作站列表",
   "clear_robots_description": "清除设备页面上不可用工作站的列表。此操作无法撤消。",
@@ -30,19 +36,27 @@
   "connect_ip_button": "完成",
   "connect_ip_link": "了解更多关于手动连接工作站的信息",
   "discovery_timeout": "发现超时。",
+  "dont_change": "不改变",
+  "dont_remind_me": "不需要再次提醒",
   "download_update": "正在下载更新...",
+  "driver_out_of_date": "网卡驱动程序更新可用",
   "enable_dev_tools": "开发者工具",
   "enable_dev_tools_description": "启用此设置将在应用启动时打开开发者工具，打开额外的日志记录并访问功能标志。",
   "error_boundary_desktop_app_description": "您需要重新加载应用程序。出现以下错误信息，请联系技术支持：",
   "error_boundary_title": "发生未知错误",
+  "error_recovery_mode": "恢复模式",
+  "error_recovery_mode_description": "出现协议错误时暂停，而不是取消运行。",
   "feature_flags": "功能标志",
   "general": "通用",
+  "get_update": "获取更新",
   "heater_shaker_attach_description": "在进行测试振荡功能或在协议中使用热震荡模块功能之前，显示正确连接热震荡模块的提醒。",
   "heater_shaker_attach_visible": "确认热震荡模块连接",
   "how_to_restore": "如何恢复过往的软件版本",
   "installing_update": "正在安装更新...",
   "ip_available": "可用",
   "ip_description_first": "输入IP地址或主机名以连接到工作站。",
+  "language": "语言",
+  "language_preference": "语言偏好",
   "manage_versions": "工作站版本和应用程序软件版本必须一致。通过工作站设置 > 高级查看工作站软件版本。",
   "new_features": "新功能",
   "no_folder": "未指定其他源文件夹",
@@ -55,6 +69,7 @@
   "ot2_advanced_settings": "OT-2高级设置",
   "override_path": "覆盖路径",
   "override_path_to_python": "覆盖Python路径",
+  "please_update_driver": "请更新您的计算机的驱动程序以确保与 OT-2 稳定连接。",
   "prevent_robot_caching": "阻止工作站进行缓存",
   "prevent_robot_caching_description": "启用此功能后，应用程序<strong>将立即清除不可用的工作站</strong>，并且不会记住它们。在网络上有许多工作站的情况下，防止缓存可能会提高网络性能，但代价是在应用程序启动时工作站发现的速度变慢且可靠性降低。",
   "privacy": "隐私",
@@ -68,6 +83,8 @@
   "restarting_app": "下载完成，正在重启应用程序...",
   "restore_previous": "查看如何恢复过往软件版本",
   "searching": "正在搜索30秒",
+  "select_a_language": "请选择使用语言。",
+  "select_language": "选择语言",
   "setup_connection": "设置连接",
   "share_display_usage": "分享屏幕使用情况",
   "share_robot_logs": "分享工作站日志",
@@ -76,10 +93,12 @@
   "software_update_available": "有可用的软件更新",
   "software_version": "应用程序软件版本",
   "successfully_deleted_unavail_robots": "成功删除不可用的工作站",
+  "system_language_preferences_update": "更新您的系统语言偏好设置",
   "tip_length_cal_method": "吸头长度校准方法",
   "trash_bin": "始终使用垃圾桶进行校准",
   "try_restarting_the_update": "尝试重新启动更新。",
   "turn_off_updates": "在应用程序设置中关闭软件更新通知。",
+  "u2e_driver_outdated_message": "您的计算机有可用的网卡驱动程序更新。",
   "up_to_date": "最新",
   "update_alerts": "软件更新提醒",
   "update_app_now": "立即更新应用程序",
@@ -97,6 +116,8 @@
   "usb_to_ethernet_not_connected": "没有连接USB-to-Ethernet适配器",
   "usb_to_ethernet_unknown_manufacturer": "未知制造商",
   "usb_to_ethernet_unknown_product": "未知适配器",
+  "use_system_language": "使用系统语言",
+  "view_adapter_info": "查看适配器信息",
   "view_software_update": "查看软件更新",
   "view_update": "查看更新"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/branded.json b/app/src/assets/localization/zh/branded.json
index b7cbc41d684..681b838dc80 100644
--- a/app/src/assets/localization/zh/branded.json
+++ b/app/src/assets/localization/zh/branded.json
@@ -81,4 +81,4 @@
   "want_to_help_out": "想帮助Opentrons吗？",
   "welcome_title": "欢迎使用您的Opentrons Flex！",
   "why_use_lpc": "耗材位置校准旨在纠正微小的偏差，Opentrons不建议使用该校准方式来进行较大的位置补偿调整。如果需要进行较大调整的耗材数据校准可能表明工作站的校准存在问题。"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/change_pipette.json b/app/src/assets/localization/zh/change_pipette.json
index 3a7f16bb724..b7cbf93a88c 100644
--- a/app/src/assets/localization/zh/change_pipette.json
+++ b/app/src/assets/localization/zh/change_pipette.json
@@ -49,4 +49,4 @@
   "unable_to_detect_pipette": "无法检测到{{pipette}}",
   "up": "上",
   "use_attached_pipette": "使用连接的移液器"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/device_details.json b/app/src/assets/localization/zh/device_details.json
index fdcab146c28..fe6644bf161 100644
--- a/app/src/assets/localization/zh/device_details.json
+++ b/app/src/assets/localization/zh/device_details.json
@@ -195,4 +195,4 @@
   "welcome_modal_description": "运行协议、管理设备及查看工作站状态的地方。",
   "welcome_to_your_dashboard": "欢迎来到您的控制面板！",
   "yes_update_now": "是的，现在更新"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/device_settings.json b/app/src/assets/localization/zh/device_settings.json
index 40e59b5c354..3208398df19 100644
--- a/app/src/assets/localization/zh/device_settings.json
+++ b/app/src/assets/localization/zh/device_settings.json
@@ -362,4 +362,4 @@
   "you_should_not_downgrade": "您不应降级到工作站制造日期之前的软件版本。",
   "your_mac_address_is": "您的MAC地址是{{macAddress}}",
   "your_robot_is_ready_to_go": "您的工作站已准备就绪。"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/devices_landing.json b/app/src/assets/localization/zh/devices_landing.json
index 4c649c41b02..394396ffb33 100644
--- a/app/src/assets/localization/zh/devices_landing.json
+++ b/app/src/assets/localization/zh/devices_landing.json
@@ -44,4 +44,4 @@
   "use_usb_cable_for_new_robot": "设置新工作站时，请使用附带的USB线进行首次连接。",
   "wait_after_connecting": "将工作站连接到电脑后等待一会",
   "why_is_this_robot_unavailable": "为什么这个工作站不可用？"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/drop_tip_wizard.json b/app/src/assets/localization/zh/drop_tip_wizard.json
index 307c2aa7e72..34629e07bd7 100644
--- a/app/src/assets/localization/zh/drop_tip_wizard.json
+++ b/app/src/assets/localization/zh/drop_tip_wizard.json
@@ -48,4 +48,4 @@
   "where_to_blowout": "您希望在哪里吹出液体？",
   "where_to_drop_tips": "您希望在哪里丢弃吸头？",
   "yes_blow_out_liquid": "是的，将液体吹入耗材中"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/error_recovery.json b/app/src/assets/localization/zh/error_recovery.json
index a740eac779d..468f3e6e369 100644
--- a/app/src/assets/localization/zh/error_recovery.json
+++ b/app/src/assets/localization/zh/error_recovery.json
@@ -122,4 +122,4 @@
   "view_error_details": "查看错误详情",
   "view_recovery_options": "查看恢复选项",
   "you_can_still_drop_tips": "在继续选择吸头之前，您仍然可以丢弃移液器上现存的吸头。"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/firmware_update.json b/app/src/assets/localization/zh/firmware_update.json
index efed676a952..d3d6cee8191 100644
--- a/app/src/assets/localization/zh/firmware_update.json
+++ b/app/src/assets/localization/zh/firmware_update.json
@@ -14,4 +14,4 @@
   "update_firmware": "更新固件",
   "update_needed": "需要更新设备固件",
   "updating_firmware": "正在更新{{subsystem}}固件..."
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/gripper_wizard_flows.json b/app/src/assets/localization/zh/gripper_wizard_flows.json
index 00319f11f6d..fcd91c7fd5f 100644
--- a/app/src/assets/localization/zh/gripper_wizard_flows.json
+++ b/app/src/assets/localization/zh/gripper_wizard_flows.json
@@ -34,4 +34,4 @@
   "stand_back_gripper_is_calibrating": "请远离，转板抓手正在进行校准",
   "try_again": "重试",
   "unable_to_detect_gripper": "未能检测到转板抓手"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/heater_shaker.json b/app/src/assets/localization/zh/heater_shaker.json
index efc48439868..5b3fee00e7c 100644
--- a/app/src/assets/localization/zh/heater_shaker.json
+++ b/app/src/assets/localization/zh/heater_shaker.json
@@ -45,4 +45,4 @@
   "troubleshoot_step_1": "返回步骤1查看模块固定安装相关说明",
   "troubleshoot_step_3": "返回步骤3查看模块适配器安装相关说明",
   "troubleshooting": "故障排除"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/incompatible_modules.json b/app/src/assets/localization/zh/incompatible_modules.json
index 0ff716c1326..20f194dbb3e 100644
--- a/app/src/assets/localization/zh/incompatible_modules.json
+++ b/app/src/assets/localization/zh/incompatible_modules.json
@@ -4,4 +4,4 @@
   "needs_your_assistance": "{{robot_name}}需要您的协助",
   "remove_before_running_protocol": "运行协议前请移除以下硬件：",
   "remove_before_using": "使用此工作站前，请移除不适用模块."
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/instruments_dashboard.json b/app/src/assets/localization/zh/instruments_dashboard.json
index f8b6c4f7c29..8d0c2e37d97 100644
--- a/app/src/assets/localization/zh/instruments_dashboard.json
+++ b/app/src/assets/localization/zh/instruments_dashboard.json
@@ -7,4 +7,4 @@
   "pipette_calibrations_differ": "<bold>建议重新校准移液器</bold> 已连接的移液器校准数据差异很大。正确校准时，这些数据应该近似。",
   "recalibrate": "重新校准",
   "serial_number": "序列号"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/labware_details.json b/app/src/assets/localization/zh/labware_details.json
index 76ade48d727..e2594adb6d1 100644
--- a/app/src/assets/localization/zh/labware_details.json
+++ b/app/src/assets/localization/zh/labware_details.json
@@ -30,4 +30,4 @@
   "y_offset": "Y-初始位置",
   "y_size": "Y-尺寸",
   "y_spacing": "Y-间距"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/labware_landing.json b/app/src/assets/localization/zh/labware_landing.json
index f209e48c3e5..a40ef0e0f93 100644
--- a/app/src/assets/localization/zh/labware_landing.json
+++ b/app/src/assets/localization/zh/labware_landing.json
@@ -25,4 +25,4 @@
   "show_in_folder": "在文件夹中显示",
   "unable_to_upload": "无法上传文件",
   "yes_delete_def": "是的，删除耗材"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/labware_position_check.json b/app/src/assets/localization/zh/labware_position_check.json
index 57fd1552a65..7b714b38094 100644
--- a/app/src/assets/localization/zh/labware_position_check.json
+++ b/app/src/assets/localization/zh/labware_position_check.json
@@ -113,4 +113,4 @@
   "view_current_offsets": "查看当前校准数据",
   "view_data": "查看数据",
   "what_is_labware_offset_data": "什么是耗材校准数据?"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/module_wizard_flows.json b/app/src/assets/localization/zh/module_wizard_flows.json
index c2d6af09862..5623b1ca792 100644
--- a/app/src/assets/localization/zh/module_wizard_flows.json
+++ b/app/src/assets/localization/zh/module_wizard_flows.json
@@ -44,4 +44,4 @@
   "stand_back_robot_in_motion": "工作站正在运行，请远离",
   "start_setup": "开始设置",
   "successfully_calibrated": "{{module}}已成功校准"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/pipette_wizard_flows.json b/app/src/assets/localization/zh/pipette_wizard_flows.json
index a1bec2143bb..d27560f564c 100644
--- a/app/src/assets/localization/zh/pipette_wizard_flows.json
+++ b/app/src/assets/localization/zh/pipette_wizard_flows.json
@@ -88,4 +88,4 @@
   "waste_chute_warning": "如果安装了外置垃圾槽，请在继续之前将其卸下。",
   "wrong_pip": "安装了错误的设备",
   "z_axis_still_attached": "Z轴板螺丝仍然处于锁定状态"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/protocol_command_text.json b/app/src/assets/localization/zh/protocol_command_text.json
index fd5373b3183..11916af8e2d 100644
--- a/app/src/assets/localization/zh/protocol_command_text.json
+++ b/app/src/assets/localization/zh/protocol_command_text.json
@@ -97,4 +97,4 @@
   "waiting_to_reach_temp_module": "等待温控模块达到{{temp}}",
   "waste_chute": "外置垃圾槽",
   "with_reference_of": "以{{wavelength}} nm为基准"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/protocol_details.json b/app/src/assets/localization/zh/protocol_details.json
index 3bb53fe43c5..dc060d65b6e 100644
--- a/app/src/assets/localization/zh/protocol_details.json
+++ b/app/src/assets/localization/zh/protocol_details.json
@@ -95,4 +95,4 @@
   "value_out_of_range": "值必须在{{min}}-{{max}}之间",
   "view_run_details": "查看运行详情",
   "view_unavailable_robots": "在设备页面查看不可用的工作站"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/protocol_info.json b/app/src/assets/localization/zh/protocol_info.json
index 0654a1134cd..1ca48b1a345 100644
--- a/app/src/assets/localization/zh/protocol_info.json
+++ b/app/src/assets/localization/zh/protocol_info.json
@@ -86,4 +86,4 @@
   "upload": "上传",
   "upload_and_simulate": "打开要在{{robot_name}}上运行的协议",
   "valid_file_types": "有效的文件类型：Python文件（.py）或在线协议编辑器文件（.json）"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/protocol_list.json b/app/src/assets/localization/zh/protocol_list.json
index bb931b9e39d..20d7f0916cf 100644
--- a/app/src/assets/localization/zh/protocol_list.json
+++ b/app/src/assets/localization/zh/protocol_list.json
@@ -23,4 +23,4 @@
   "this_protocol_will_be_trashed": "该协议将被移至此计算机的回收站，可能无法恢复。",
   "updated": "已更新",
   "yes_delete_this_protocol": "是的，删除协议"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/protocol_setup.json b/app/src/assets/localization/zh/protocol_setup.json
index 990fe911f5f..c81085ad0e4 100644
--- a/app/src/assets/localization/zh/protocol_setup.json
+++ b/app/src/assets/localization/zh/protocol_setup.json
@@ -313,4 +313,4 @@
   "what_labware_offset_is": "耗材偏移校准是一种位置调整类型，用于补偿甲板上耗材整体位置的微小实际差异。耗材偏移校准数据是耗材、甲板位和工作站的特定组合。",
   "with_the_chosen_value": "使用选定的值时，发生以下错误：",
   "you_havent_confirmed": "您尚未确认 {{missingSteps}}。在继续运行协议之前，请确保这些步骤正确无误。"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/quick_transfer.json b/app/src/assets/localization/zh/quick_transfer.json
index 159b627daf4..df1260f6048 100644
--- a/app/src/assets/localization/zh/quick_transfer.json
+++ b/app/src/assets/localization/zh/quick_transfer.json
@@ -156,4 +156,4 @@
   "well_selection": "孔位选择",
   "wells": "孔",
   "will_be_deleted": "<strong>{{transferName}}</strong> 将被永久删除。"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/robot_calibration.json b/app/src/assets/localization/zh/robot_calibration.json
index d5959a113c6..2cdc2db83e0 100644
--- a/app/src/assets/localization/zh/robot_calibration.json
+++ b/app/src/assets/localization/zh/robot_calibration.json
@@ -130,4 +130,4 @@
   "using_current_calibrations": "使用当前校准。",
   "you_can_remove_cal_block": "您现在可以从甲板上移除校准块。",
   "you_will_need": "您将需要："
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/robot_controls.json b/app/src/assets/localization/zh/robot_controls.json
index ecb31d2adf6..f4b9ab6cec2 100644
--- a/app/src/assets/localization/zh/robot_controls.json
+++ b/app/src/assets/localization/zh/robot_controls.json
@@ -11,4 +11,4 @@
   "restart_description": "重新启动工作站。",
   "restart_label": "重新启动工作站",
   "title": "工作站控制"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/run_details.json b/app/src/assets/localization/zh/run_details.json
index b6fabcfe08c..5fd78e8b54f 100644
--- a/app/src/assets/localization/zh/run_details.json
+++ b/app/src/assets/localization/zh/run_details.json
@@ -162,4 +162,4 @@
   "view_error_details": "查看错误详情",
   "view_warning_details": "查看警告详情",
   "warning_details": "警告详情"
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/shared.json b/app/src/assets/localization/zh/shared.json
index 694e7b80037..af370c8c993 100644
--- a/app/src/assets/localization/zh/shared.json
+++ b/app/src/assets/localization/zh/shared.json
@@ -83,4 +83,4 @@
   "view_latest_release_notes": "查看最新发布说明：",
   "yes": "是",
   "you_will_need": "您将需要："
-}
+}
\ No newline at end of file
diff --git a/app/src/assets/localization/zh/top_navigation.json b/app/src/assets/localization/zh/top_navigation.json
index 79de9180bb8..1f9af58ca43 100644
--- a/app/src/assets/localization/zh/top_navigation.json
+++ b/app/src/assets/localization/zh/top_navigation.json
@@ -22,4 +22,4 @@
   "run": "运行",
   "run_details": "运行详细信息",
   "settings": "设置"
-}
+}
\ No newline at end of file