ctl.sh

#!/usr/bin/env bash
set -euo pipefail

REPO_ROOT="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
HERMES_HOME="${HERMES_HOME:-${HOME}/.hermes}"
PID_FILE="${HERMES_WEBUI_PID_FILE:-${HERMES_HOME}/webui.pid}"
LOG_FILE="${HERMES_WEBUI_LOG_FILE:-${HERMES_HOME}/webui.log}"
STATE_FILE="${HERMES_WEBUI_CTL_STATE_FILE:-${HERMES_HOME}/webui.ctl.env}"
DEFAULT_STATE_DIR="${HERMES_WEBUI_STATE_DIR:-${HERMES_HOME}/webui}"
DEFAULT_LAUNCHD_LABEL="${HERMES_WEBUI_LAUNCHD_LABEL:-com.parantoux.hermes-webui}"

usage() {
  cat <<'EOF'
Usage: ./ctl.sh <command> [args]

Commands:
  start [bootstrap args...]   Start Hermes WebUI as a background daemon
  stop                        Stop the daemon started by ctl.sh
  restart [bootstrap args...] Stop, then start again
  status                      Show daemon, host/port, log, and health status
  logs [--lines N] [--follow|--no-follow]
                              Show the daemon log (defaults to tail -n 100 -f)
EOF
}

ensure_home() {
  mkdir -p "${HERMES_HOME}" "${DEFAULT_STATE_DIR}"
}

_load_repo_dotenv_preserving_env() {
  [[ "${HERMES_WEBUI_NO_DOTENV:-0}" == "1" ]] && return 0
  local env_file="${REPO_ROOT}/.env"
  [[ -f "${env_file}" ]] || return 0

  local -a preserved=()
  local line key value
  while IFS= read -r line || [[ -n "${line}" ]]; do
    line="${line#${line%%[![:space:]]*}}"
    [[ -z "${line}" || "${line}" == \#* || "${line}" != *=* ]] && continue
    key="${line%%=*}"
    key="${key#export }"
    key="${key//[[:space:]]/}"
    [[ "${key}" =~ ^[A-Za-z_][A-Za-z0-9_]*$ ]] || continue
    if [[ -n "${!key+x}" ]]; then
      value="${!key}"
      preserved+=("${key}=${value}")
    fi
  done < "${env_file}"

  set -a
  # shellcheck source=/dev/null
  source "${env_file}"
  set +a

  local assignment
  if [[ ${#preserved[@]} -gt 0 ]]; then
    for assignment in "${preserved[@]}"; do
      export "${assignment}"
    done
  fi
}

_find_python() {
  if [[ -n "${HERMES_WEBUI_PYTHON:-}" ]]; then
    printf '%s\n' "${HERMES_WEBUI_PYTHON}"
  elif command -v python3 >/dev/null 2>&1; then
    command -v python3
  elif command -v python >/dev/null 2>&1; then
    command -v python
  else
    echo "[ctl] Python 3 is required to run bootstrap.py" >&2
    return 1
  fi
}

_parse_launch_binding() {
  CTL_HOST="${HERMES_WEBUI_HOST:-127.0.0.1}"
  CTL_PORT="${HERMES_WEBUI_PORT:-8787}"
  local arg next_is_host=0 saw_port=0
  for arg in "$@"; do
    if (( next_is_host )); then
      CTL_HOST="${arg}"
      next_is_host=0
      continue
    fi
    case "${arg}" in
      --host)
        next_is_host=1
        ;;
      --host=*)
        CTL_HOST="${arg#--host=}"
        ;;
      --*)
        ;;
      *)
        if (( ! saw_port )) && [[ "${arg}" =~ ^[0-9]+$ ]]; then
          CTL_PORT="${arg}"
          saw_port=1
        fi
        ;;
    esac
  done
}

_build_bootstrap_args() {
  CTL_BOOTSTRAP_ARGS=()
  local arg next_is_host=0 saw_port=0
  for arg in "$@"; do
    if (( next_is_host )); then
      next_is_host=0
      continue
    fi
    case "${arg}" in
      --host)
        next_is_host=1
        ;;
      --host=*)
        ;;
      --*)
        CTL_BOOTSTRAP_ARGS+=("${arg}")
        ;;
      *)
        if (( ! saw_port )) && [[ "${arg}" =~ ^[0-9]+$ ]]; then
          saw_port=1
        else
          CTL_BOOTSTRAP_ARGS+=("${arg}")
        fi
        ;;
    esac
  done
}

_write_state() {
  local pid="$1" host="$2" port="$3" python_exe="${4:-}"
  local state_dir="${HERMES_WEBUI_STATE_DIR:-${DEFAULT_STATE_DIR}}"
  {
    printf 'PID=%q\n' "${pid}"
    printf 'REPO_ROOT=%q\n' "${REPO_ROOT}"
    printf 'PYTHON_EXE=%q\n' "${python_exe}"
    printf 'HOST=%q\n' "${host}"
    printf 'PORT=%q\n' "${port}"
    printf 'LOG_FILE=%q\n' "${LOG_FILE}"
    printf 'STATE_DIR=%q\n' "${state_dir}"
    printf 'STARTED_AT=%q\n' "$(date -u +%Y-%m-%dT%H:%M:%SZ)"
  } > "${STATE_FILE}"
}

_load_state_if_present() {
  if [[ -f "${STATE_FILE}" ]]; then
    # shellcheck source=/dev/null
    source "${STATE_FILE}"
  fi
}

_pid_from_file() {
  [[ -f "${PID_FILE}" ]] || return 1
  local pid
  pid="$(tr -d '[:space:]' < "${PID_FILE}")"
  [[ "${pid}" =~ ^[0-9]+$ ]] || return 1
  printf '%s\n' "${pid}"
}

_is_alive() {
  local pid="$1"
  kill -0 "${pid}" >/dev/null 2>&1
}

_is_windows_bash() {
  [[ "${OS:-}" == "Windows_NT" ]] && return 0
  case "$(uname -s 2>/dev/null || true)" in
    MINGW*|MSYS*|CYGWIN*) return 0 ;;
    *) return 1 ;;
  esac
}

_windows_bash_path() {
  local path="${1//\\//}" drive rest
  if [[ "${path}" =~ ^([A-Za-z]):(.*)$ ]]; then
    drive="${BASH_REMATCH[1],,}"
    rest="${BASH_REMATCH[2]}"
    printf '/%s%s\n' "${drive}" "${rest}"
    return
  fi
  printf '%s\n' "${path}"
}

_windows_pid_for_bash_pid() {
  local pid="$1"
  ps -p "${pid}" -l 2>/dev/null | awk 'NR == 2 { print $4 }'
}

_stop_webui_pid() {
  local pid="$1" signal="${2:-TERM}"
  if _is_windows_bash && command -v taskkill >/dev/null 2>&1; then
    local winpid
    winpid="$(_windows_pid_for_bash_pid "${pid}")"
    if [[ "${winpid}" =~ ^[0-9]+$ ]]; then
      taskkill //F //T //PID "${winpid}" >/dev/null 2>&1 || true
      return
    fi
  fi
  if [[ "${signal}" == "KILL" ]]; then
    kill -KILL "${pid}" >/dev/null 2>&1 || true
  else
    kill "${pid}" >/dev/null 2>&1 || true
  fi
}

_proc_args() {
  local pid="$1" args
  args="$(ps -p "${pid}" -o args= 2>/dev/null || true)"
  if [[ -n "${args}" ]]; then
    printf '%s\n' "${args}"
    return
  fi
  if _is_windows_bash; then
    local winpid
    winpid="$(_windows_pid_for_bash_pid "${pid}")"
    if [[ "${winpid}" =~ ^[0-9]+$ ]] && command -v wmic >/dev/null 2>&1; then
      args="$(wmic process where "ProcessId=${winpid}" get CommandLine //value 2>/dev/null | sed -n 's/^CommandLine=//p' | tr -d '\r')"
      if [[ -n "${args}" ]]; then
        printf '%s\n' "${args}"
        return
      fi
    fi
    ps -p "${pid}" -f 2>/dev/null | awk 'NR == 2 { for (i = 8; i <= NF; i++) printf "%s%s", (i == 8 ? "" : " "), $i; print "" }'
  fi
}

_is_owned_webui_pid() {
  local pid="$1" args args_slash state_repo="" state_repo_slash="" state_repo_win="" state_repo_win_slash="" state_python="" state_python_slash="" state_python_bash=""
  [[ -f "${STATE_FILE}" ]] || return 1
  _load_state_if_present
  state_repo="${REPO_ROOT:-}"
  state_python="${PYTHON_EXE:-}"
  state_repo_slash="${state_repo//\\//}"
  state_python_slash="${state_python//\\//}"
  if _is_windows_bash; then
    state_repo_win="$(cygpath -w "${state_repo}" 2>/dev/null || true)"
    state_repo_win_slash="${state_repo_win//\\//}"
  fi
  if [[ -n "${state_python}" ]] && _is_windows_bash; then
    state_python_bash="$(_windows_bash_path "${state_python}")"
  fi
  [[ "${state_repo}" == "$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)" ]] || return 1
  args="$(_proc_args "${pid}")"
  [[ -n "${args}" ]] || return 1
  args_slash="${args//\\//}"
  [[ "${args_slash}" == *"${state_repo_slash}/bootstrap.py"* ||
     "${args_slash}" == *"${state_repo_slash}/server.py"* ||
     "${args_slash}" == *"${state_repo_slash}/start.sh"* ||
     ( -n "${state_repo_win_slash}" && "${args_slash}" == *"${state_repo_win_slash}/bootstrap.py"* ) ||
     ( -n "${state_repo_win_slash}" && "${args_slash}" == *"${state_repo_win_slash}/server.py"* ) ||
     ( -n "${state_repo_win_slash}" && "${args_slash}" == *"${state_repo_win_slash}/start.sh"* ) ||
     ( -n "${state_python}" && "${args}" == *"${state_python}"* ) ||
     ( -n "${state_python_slash}" && "${args_slash}" == *"${state_python_slash}"* ) ||
     ( -n "${state_python_bash}" && "${args_slash}" == *"${state_python_bash}"* ) ]]
}

_current_pid() {
  local pid
  pid="$(_pid_from_file)" || return 1
  if _is_alive "${pid}" && _is_owned_webui_pid "${pid}"; then
    printf '%s\n' "${pid}"
    return 0
  fi
  return 1
}

_clear_stale_pid() {
  if [[ -f "${PID_FILE}" ]]; then
    rm -f "${PID_FILE}" "${STATE_FILE}"
    echo "[ctl] Removed stale PID file: ${PID_FILE}"
  fi
}

_pid_listens_on_port() {
  # Best-effort check that PID $1 has a listening socket on TCP port $2.
  # macOS (where launchd exists) ships lsof; if we can't determine ownership we
  # return 2 ("unknown") so the caller can fall back conservatively rather than
  # guess. Never blocks on a hard failure.
  local pid="$1" port="$2"
  [[ "${pid}" =~ ^[0-9]+$ && "${port}" =~ ^[0-9]+$ ]] || return 2
  if command -v lsof >/dev/null 2>&1; then
    if lsof -nP -p "${pid}" -iTCP:"${port}" -sTCP:LISTEN >/dev/null 2>&1; then
      return 0   # PID is listening on that port → real conflict
    fi
    return 1     # PID is alive but NOT listening on that port → no conflict
  fi
  return 2       # can't determine
}

_launchd_webui_pid() {
  [[ "${HERMES_WEBUI_CTL_ALLOW_LAUNCHD_CONFLICT:-0}" == "1" ]] && return 1
  command -v launchctl >/dev/null 2>&1 || return 1
  local label="${HERMES_WEBUI_LAUNCHD_LABEL:-${DEFAULT_LAUNCHD_LABEL}}"
  [[ -n "${label}" ]] || return 1
  local uid launchd_out pid
  uid="$(id -u)"
  launchd_out="$(launchctl print "gui/${uid}/${label}" 2>/dev/null)" || return 1
  pid="$(printf '%s\n' "${launchd_out}" | awk '/^[[:space:]]*pid = / {print $3; exit}')"
  [[ "${pid}" =~ ^[0-9]+$ ]] || return 1
  (( pid > 0 )) || return 1
  _is_alive "${pid}" || return 1
  # Only treat the launchd job as a conflict for the port we are about to bind.
  # A second instance on a DIFFERENT port (e.g. HERMES_WEBUI_PORT=8788 for a
  # test build) does not collide with the launchd-managed default and must be
  # allowed to start (#3291 over-block fix). When port ownership can't be
  # determined (no lsof), fall back to the conservative previous behavior of
  # only guarding the default port so non-default ports are never wrongly blocked.
  local want_port="${CTL_PORT:-${HERMES_WEBUI_PORT:-8787}}"
  _pid_listens_on_port "${pid}" "${want_port}"
  case "$?" in
    0) printf '%s\n' "${pid}"; return 0 ;;   # launchd job listens on our port → block
    1) return 1 ;;                            # launchd job on a different port → allow
    *)                                        # unknown: only guard the default port
      if [[ "${want_port}" == "8787" ]]; then
        printf '%s\n' "${pid}"; return 0
      fi
      return 1 ;;
  esac
}

start_cmd() {
  ensure_home
  _load_repo_dotenv_preserving_env
  export HERMES_WEBUI_STATE_DIR="${HERMES_WEBUI_STATE_DIR:-${DEFAULT_STATE_DIR}}"
  mkdir -p "${HERMES_WEBUI_STATE_DIR}"
  _parse_launch_binding "$@"
  _build_bootstrap_args "$@"
  export HERMES_WEBUI_HOST="${CTL_HOST}"
  export HERMES_WEBUI_PORT="${CTL_PORT}"

  local existing_pid
  if existing_pid="$(_current_pid 2>/dev/null)"; then
    echo "[ctl] Hermes WebUI is already running (PID ${existing_pid})"
    return 0
  fi
  local launchd_pid
  if launchd_pid="$(_launchd_webui_pid 2>/dev/null)"; then
    echo "[ctl] Refusing to start a second Hermes WebUI while launchd job ${HERMES_WEBUI_LAUNCHD_LABEL:-${DEFAULT_LAUNCHD_LABEL}} is running (PID ${launchd_pid})." >&2
    echo "[ctl] Use launchctl kickstart -k gui/$(id -u)/${HERMES_WEBUI_LAUNCHD_LABEL:-${DEFAULT_LAUNCHD_LABEL}} or disable the launchd job before using ctl.sh start." >&2
    return 2
  fi
  _clear_stale_pid >/dev/null 2>&1 || true

  local python_exe pid
  python_exe="$(_find_python)"
  : >> "${LOG_FILE}"
  (
    cd "${REPO_ROOT}"
    trap '' HUP
    export HERMES_WEBUI_PRESERVE_ENV=1
    exec nohup "${python_exe}" "${REPO_ROOT}/bootstrap.py" --no-browser --foreground --host "${CTL_HOST}" "${CTL_PORT}" ${CTL_BOOTSTRAP_ARGS[@]+"${CTL_BOOTSTRAP_ARGS[@]}"}
  ) >> "${LOG_FILE}" 2>&1 &
  pid=$!

  printf '%s\n' "${pid}" > "${PID_FILE}"
  _write_state "${pid}" "${CTL_HOST}" "${CTL_PORT}" "${python_exe}"
  sleep 0.15
  if ! _is_alive "${pid}"; then
    echo "[ctl] Hermes WebUI failed to stay running. Log: ${LOG_FILE}" >&2
    rm -f "${PID_FILE}" "${STATE_FILE}"
    return 1
  fi
  echo "[ctl] Started Hermes WebUI (PID ${pid})"
  echo "[ctl] Bound: ${CTL_HOST}:${CTL_PORT}"
  echo "[ctl] Log: ${LOG_FILE}"
}

stop_cmd() {
  ensure_home
  local pid
  if ! pid="$(_pid_from_file 2>/dev/null)"; then
    echo "[ctl] Hermes WebUI is stopped"
    rm -f "${PID_FILE}" "${STATE_FILE}"
    return 0
  fi

  if ! _is_alive "${pid}" || ! _is_owned_webui_pid "${pid}"; then
    _clear_stale_pid
    return 0
  fi

  echo "[ctl] Stopping Hermes WebUI (PID ${pid})"
  _stop_webui_pid "${pid}" TERM
  local i
  for i in {1..50}; do
    if ! _is_alive "${pid}"; then
      rm -f "${PID_FILE}" "${STATE_FILE}"
      echo "[ctl] Stopped"
      return 0
    fi
    sleep 0.1
  done

  echo "[ctl] Process did not exit after SIGTERM; sending SIGKILL" >&2
  _stop_webui_pid "${pid}" KILL
  rm -f "${PID_FILE}" "${STATE_FILE}"
}

_health_line() {
  local host="$1" port="$2" url result
  url="http://${host}:${port}/health"
  if command -v curl >/dev/null 2>&1; then
    if result="$(curl -fsS --max-time 2 "${url}" 2>/dev/null)"; then
      if command -v python3 >/dev/null 2>&1; then
        printf '%s' "${result}" | python3 -c 'import json,sys
try:
    data=json.load(sys.stdin)
    sessions=data.get("sessions", data.get("session_count", "?"))
    active=data.get("active_streams", "?")
    status=data.get("status", "ok")
    print(f"ok ({sessions} sessions, {active} active streams)" if status == "ok" else status)
except Exception:
    print("ok")'
      else
        echo "ok"
      fi
    else
      echo "unreachable (${url})"
    fi
  else
    echo "unknown (curl not found; ${url})"
  fi
}

status_cmd() {
  ensure_home
  _load_state_if_present
  local host="${HOST:-${HERMES_WEBUI_HOST:-127.0.0.1}}"
  local port="${PORT:-${HERMES_WEBUI_PORT:-8787}}"
  local log_path="${LOG_FILE}"
  local pid uptime health

  if pid="$(_current_pid 2>/dev/null)"; then
    uptime="$(ps -p "${pid}" -o etime= 2>/dev/null | sed 's/^ *//' || true)"
    health="$(_health_line "${host}" "${port}")"
    echo "● hermes-webui — running"
    echo "  PID:     ${pid}"
    echo "  Uptime:  ${uptime:-unknown}"
    echo "  Bound:   ${host}:${port}"
    echo "  Log:     ${log_path}"
    echo "  Health:  ${health}"
  else
    [[ -f "${PID_FILE}" ]] && _clear_stale_pid >/dev/null 2>&1 || true
    echo "● hermes-webui — stopped"
    echo "  PID:     -"
    echo "  Bound:   ${host}:${port}"
    echo "  Log:     ${log_path}"
    echo "  Health:  not checked"
  fi
}

logs_cmd() {
  ensure_home
  local lines=100 follow=1
  while [[ $# -gt 0 ]]; do
    case "$1" in
      --lines)
        shift
        lines="${1:-}"
        [[ "${lines}" =~ ^[0-9]+$ ]] || { echo "[ctl] --lines requires a number" >&2; return 2; }
        ;;
      --lines=*)
        lines="${1#--lines=}"
        [[ "${lines}" =~ ^[0-9]+$ ]] || { echo "[ctl] --lines requires a number" >&2; return 2; }
        ;;
      --follow|-f)
        follow=1
        ;;
      --no-follow)
        follow=0
        ;;
      *)
        echo "[ctl] Unknown logs option: $1" >&2
        return 2
        ;;
    esac
    shift
  done
  touch "${LOG_FILE}"
  if (( follow )); then
    tail -n "${lines}" -f "${LOG_FILE}"
  else
    tail -n "${lines}" "${LOG_FILE}"
  fi
}

cmd="${1:-}"
if [[ $# -gt 0 ]]; then
  shift
fi

case "${cmd}" in
  start) start_cmd "$@" ;;
  stop) stop_cmd ;;
  restart) stop_cmd; start_cmd "$@" ;;
  status) status_cmd ;;
  logs) logs_cmd "$@" ;;
  -h|--help|help|"") usage ;;
  *) echo "[ctl] Unknown command: ${cmd}" >&2; usage >&2; exit 2 ;;
esac