Skip to content

Commit 482ba05

Browse files
tannewttannewt
authored
Merge pull request #7658 from titimoby/8.0.x.add_Lilygo_tembed
add support Lilygo T-embed esp32s3 board
2 parents 8a8579a + c6d38e4 commit 482ba05

File tree

5 files changed

+267
-0
lines changed

5 files changed

+267
-0
lines changed

‎ports/espressif/boards/lilygo_tembed_esp32s3/board.c

Lines changed: 99 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,99 @@
1+
/*
2+
* This file is part of the MicroPython project, http://micropython.org/
3+
*
4+
* The MIT License (MIT)
5+
*
6+
* Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
7+
*
8+
* Permission is hereby granted, free of charge, to any person obtaining a copy
9+
* of this software and associated documentation files (the "Software"), to deal
10+
* in the Software without restriction, including without limitation the rights
11+
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12+
* copies of the Software, and to permit persons to whom the Software is
13+
* furnished to do so, subject to the following conditions:
14+
*
15+
* The above copyright notice and this permission notice shall be included in
16+
* all copies or substantial portions of the Software.
17+
*
18+
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19+
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20+
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
21+
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22+
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23+
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24+
* THE SOFTWARE.
25+
*/
26+
27+
#include "supervisor/board.h"
28+
#include "mpconfigboard.h"
29+
#include "shared-bindings/microcontroller/Pin.h"
30+
31+
#include "shared-bindings/busio/SPI.h"
32+
#include "shared-bindings/displayio/FourWire.h"
33+
#include "shared-module/displayio/__init__.h"
34+
#include "shared-module/displayio/mipi_constants.h"
35+
36+
uint8_t display_init_sequence[] = {
37+
0x01, 0x80, 0x96, // _SWRESET and Delay 150ms
38+
0x11, 0x80, 0xFF, // _SLPOUT and Delay 500ms
39+
0x3A, 0x81, 0x55, 0x0A, // _COLMOD and Delay 10ms
40+
0x13, 0x80, 0x0A, // _NORON and Delay 10ms
41+
0x36, 0x01, 0xC8, // _MADCTL
42+
0x29, 0x80, 0xFF, // _DISPON and Delay 500ms
43+
};
44+
45+
void board_init(void) {
46+
busio_spi_obj_t *spi = &displays[0].fourwire_bus.inline_bus;
47+
common_hal_busio_spi_construct(spi, &pin_GPIO12, &pin_GPIO11, NULL, false);
48+
common_hal_busio_spi_never_reset(spi);
49+
50+
displayio_fourwire_obj_t *bus = &displays[0].fourwire_bus;
51+
bus->base.type = &displayio_fourwire_type;
52+
common_hal_displayio_fourwire_construct(bus,
53+
spi,
54+
&pin_GPIO13, // TFT_DC Command or data
55+
&pin_GPIO10, // TFT_CS Chip select
56+
&pin_GPIO9, // TFT_RST Reset
57+
60000000, // Baudrate
58+
0, // Polarity
59+
0); // Phase
60+
61+
displayio_display_obj_t *display = &displays[0].display;
62+
display->base.type = &displayio_display_type;
63+
common_hal_displayio_display_construct(display,
64+
bus,
65+
320, // Width
66+
170, // Height
67+
35, // column start
68+
0, // row start
69+
90, // rotation
70+
16, // Color depth
71+
false, // Grayscale
72+
false, // pixels in a byte share a row. Only valid for depths < 8
73+
1, // bytes per cell. Only valid for depths < 8
74+
false, // reverse_pixels_in_byte. Only valid for depths < 8
75+
true, // reverse_pixels_in_word
76+
MIPI_COMMAND_SET_COLUMN_ADDRESS, // Set column command
77+
MIPI_COMMAND_SET_PAGE_ADDRESS, // Set row command
78+
MIPI_COMMAND_WRITE_MEMORY_START, // Write memory command
79+
display_init_sequence,
80+
sizeof(display_init_sequence),
81+
&pin_GPIO15, // backlight pin
82+
NO_BRIGHTNESS_COMMAND,
83+
1.0f, // brightness
84+
false, // single_byte_bounds
85+
false, // data_as_commands
86+
true, // auto_refresh
87+
60, // native_frames_per_second
88+
true, // backlight_on_high
89+
false, // SH1107_addressing
90+
50000); // backlight pwm frequency
91+
92+
// Debug UART
93+
#ifdef DEBUG
94+
common_hal_never_reset_pin(&pin_GPIO43);
95+
common_hal_never_reset_pin(&pin_GPIO44);
96+
#endif
97+
}
98+
99+
// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

‎ports/espressif/boards/lilygo_tembed_esp32s3/mpconfigboard.h

Lines changed: 38 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,38 @@
1+
/*
2+
* This file is part of the MicroPython project, http://micropython.org/
3+
*
4+
* The MIT License (MIT)
5+
*
6+
* Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
7+
*
8+
* Permission is hereby granted, free of charge, to any person obtaining a copy
9+
* of this software and associated documentation files (the "Software"), to deal
10+
* in the Software without restriction, including without limitation the rights
11+
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12+
* copies of the Software, and to permit persons to whom the Software is
13+
* furnished to do so, subject to the following conditions:
14+
*
15+
* The above copyright notice and this permission notice shall be included in
16+
* all copies or substantial portions of the Software.
17+
*
18+
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19+
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20+
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
21+
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22+
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23+
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24+
* THE SOFTWARE.
25+
*/
26+
27+
// Micropython setup
28+
29+
#define MICROPY_HW_BOARD_NAME "LILYGO TEMBED ESP32S3"
30+
#define MICROPY_HW_MCU_NAME "ESP32S3"
31+
32+
#define MICROPY_HW_NEOPIXEL (&pin_GPIO48)
33+
34+
#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO11)
35+
#define DEFAULT_SPI_BUS_SCK (&pin_GPIO12)
36+
37+
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
38+
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)

‎ports/espressif/boards/lilygo_tembed_esp32s3/mpconfigboard.mk

Lines changed: 10 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,10 @@
1+
USB_VID = 0x303A
2+
USB_PID = 0x8151
3+
USB_PRODUCT = "TEMBED ESP32S3"
4+
USB_MANUFACTURER = "LILYGO"
5+
6+
IDF_TARGET = esp32s3
7+
8+
CIRCUITPY_ESP_FLASH_MODE = dio
9+
CIRCUITPY_ESP_FLASH_FREQ = 80m
10+
CIRCUITPY_ESP_FLASH_SIZE = 16MB

‎ports/espressif/boards/lilygo_tembed_esp32s3/pins.c

Lines changed: 86 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,86 @@
1+
#include "shared-bindings/board/__init__.h"
2+
#include "shared-module/displayio/__init__.h"
3+
4+
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
5+
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
6+
7+
{ MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) },
8+
{ MP_ROM_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_GPIO1) },
9+
{ MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) },
10+
{ MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) },
11+
{ MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) },
12+
{ MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) },
13+
{ MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) },
14+
{ MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) },
15+
{ MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) },
16+
{ MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) },
17+
{ MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) },
18+
{ MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) },
19+
{ MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
20+
{ MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) },
21+
{ MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) },
22+
{ MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) },
23+
{ MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) },
24+
{ MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) },
25+
{ MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) },
26+
{ MP_ROM_QSTR(MP_QSTR_IO19), MP_ROM_PTR(&pin_GPIO19) },
27+
{ MP_ROM_QSTR(MP_QSTR_IO20), MP_ROM_PTR(&pin_GPIO20) },
28+
{ MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) },
29+
{ MP_ROM_QSTR(MP_QSTR_IO35), MP_ROM_PTR(&pin_GPIO35) },
30+
{ MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) },
31+
{ MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) },
32+
{ MP_ROM_QSTR(MP_QSTR_IO38), MP_ROM_PTR(&pin_GPIO38) },
33+
{ MP_ROM_QSTR(MP_QSTR_IO39), MP_ROM_PTR(&pin_GPIO39) },
34+
{ MP_ROM_QSTR(MP_QSTR_IO40), MP_ROM_PTR(&pin_GPIO40) },
35+
{ MP_ROM_QSTR(MP_QSTR_IO41), MP_ROM_PTR(&pin_GPIO41) },
36+
{ MP_ROM_QSTR(MP_QSTR_IO42), MP_ROM_PTR(&pin_GPIO42) },
37+
{ MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) },
38+
{ MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44) },
39+
{ MP_ROM_QSTR(MP_QSTR_IO45), MP_ROM_PTR(&pin_GPIO45) },
40+
{ MP_ROM_QSTR(MP_QSTR_IO46), MP_ROM_PTR(&pin_GPIO46) },
41+
{ MP_ROM_QSTR(MP_QSTR_IO47), MP_ROM_PTR(&pin_GPIO47) },
42+
{ MP_ROM_QSTR(MP_QSTR_IO48), MP_ROM_PTR(&pin_GPIO48) },
43+
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO48) },
44+
45+
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
46+
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
47+
48+
// TFT control pins
49+
{ MP_OBJ_NEW_QSTR(MP_QSTR_TFT_LITE), MP_ROM_PTR(&pin_GPIO15) },
50+
{ MP_OBJ_NEW_QSTR(MP_QSTR_TFT_MOSI), MP_ROM_PTR(&pin_GPIO11) },
51+
{ MP_OBJ_NEW_QSTR(MP_QSTR_TFT_SCK), MP_ROM_PTR(&pin_GPIO12) },
52+
{ MP_OBJ_NEW_QSTR(MP_QSTR_TFT_RST), MP_ROM_PTR(&pin_GPIO9) },
53+
{ MP_ROM_QSTR(MP_QSTR_TFT_CS), MP_ROM_PTR(&pin_GPIO10) },
54+
{ MP_ROM_QSTR(MP_QSTR_TFT_DC), MP_ROM_PTR(&pin_GPIO13) },
55+
56+
{ MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display)},
57+
58+
// SD card control pins
59+
{ MP_ROM_QSTR(MP_QSTR_SD_CS), MP_ROM_PTR(&pin_GPIO39) },
60+
{ MP_ROM_QSTR(MP_QSTR_SD_SCLK), MP_ROM_PTR(&pin_GPIO40) },
61+
{ MP_ROM_QSTR(MP_QSTR_SD_MOSI), MP_ROM_PTR(&pin_GPIO41) },
62+
{ MP_ROM_QSTR(MP_QSTR_SD_MISO), MP_ROM_PTR(&pin_GPIO38) },
63+
64+
// Microphone control pins
65+
{ MP_ROM_QSTR(MP_QSTR_ES_BCLK), MP_ROM_PTR(&pin_GPIO47) },
66+
{ MP_ROM_QSTR(MP_QSTR_ES_LRCK), MP_ROM_PTR(&pin_GPIO21) },
67+
{ MP_ROM_QSTR(MP_QSTR_ES_DIN), MP_ROM_PTR(&pin_GPIO14) },
68+
{ MP_ROM_QSTR(MP_QSTR_ES_MCLK), MP_ROM_PTR(&pin_GPIO48) },
69+
70+
// Speaker control pins
71+
{ MP_ROM_QSTR(MP_QSTR_I2S_BCLK), MP_ROM_PTR(&pin_GPIO7) },
72+
{ MP_ROM_QSTR(MP_QSTR_I2S_WCLK), MP_ROM_PTR(&pin_GPIO5) },
73+
{ MP_ROM_QSTR(MP_QSTR_I2S_DOUT), MP_ROM_PTR(&pin_GPIO6) },
74+
75+
// Encoder control pins
76+
{ MP_ROM_QSTR(MP_QSTR_ENCODER_A), MP_ROM_PTR(&pin_GPIO2) },
77+
{ MP_ROM_QSTR(MP_QSTR_ENCODER_B), MP_ROM_PTR(&pin_GPIO1) },
78+
{ MP_ROM_QSTR(MP_QSTR_ENCODER_BUTTON), MP_ROM_PTR(&pin_GPIO0) },
79+
80+
// APA102 control pins (Leds)
81+
{ MP_ROM_QSTR(MP_QSTR_APA102_CLK), MP_ROM_PTR(&pin_GPIO45) },
82+
{ MP_ROM_QSTR(MP_QSTR_APA102_DI), MP_ROM_PTR(&pin_GPIO42) },
83+
84+
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
85+
};
86+
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

‎ports/espressif/boards/lilygo_tembed_esp32s3/sdkconfig

Lines changed: 34 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,34 @@
1+
CONFIG_ESP32S3_SPIRAM_SUPPORT=y
2+
#
3+
# SPI RAM config
4+
#
5+
# CONFIG_SPIRAM_MODE_QUAD is not set
6+
CONFIG_SPIRAM_MODE_OCT=y
7+
# CONFIG_SPIRAM_TYPE_AUTO is not set
8+
CONFIG_SPIRAM_TYPE_ESPPSRAM64=y
9+
CONFIG_SPIRAM_SIZE=8388608
10+
# end of SPI RAM config
11+
12+
CONFIG_DEFAULT_PSRAM_CLK_IO=30
13+
#
14+
# PSRAM Clock and CS IO for ESP32S3
15+
#
16+
CONFIG_DEFAULT_PSRAM_CS_IO=26
17+
# end of PSRAM Clock and CS IO for ESP32S3
18+
19+
# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set
20+
# CONFIG_SPIRAM_RODATA is not set
21+
CONFIG_SPIRAM_SPEED_80M=y
22+
# CONFIG_SPIRAM_SPEED_40M is not set
23+
CONFIG_SPIRAM=y
24+
CONFIG_SPIRAM_BOOT_INIT=y
25+
# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set
26+
CONFIG_SPIRAM_USE_MEMMAP=y
27+
# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
28+
# CONFIG_SPIRAM_USE_MALLOC is not set
29+
CONFIG_SPIRAM_MEMTEST=y
30+
#
31+
# LWIP
32+
#
33+
CONFIG_LWIP_LOCAL_HOSTNAME="espressif-esp32s3"
34+
# end of LWIP

0 commit comments

Comments
 (0)