Use consistent list style

Author: seaxwi

content/Hardware Support/Nano Family/Supply-USB-power-via-the-VUSB-VBUS-or-5V-pin-on-Nano-boards.md

@@ -18,18 +18,18 @@ In this article:
 > [!WARNING]
 > Do not connect the VUSB/VBUS/5V pin to any of the other pins on the board.
 
-* The VUSB/VBUS/5V pin outputs power directly from the USB connector when enabled.
-* Power from the USB supply can range from 4.4 V to 5.5 V, per USB specifications.
-* Do not connect the VUSB/VBUS/5V pin to any of the other pins on the board. Supplying 5 V to other pins can permanently damage the board.
+- The VUSB/VBUS/5V pin outputs power directly from the USB connector when enabled.
+- Power from the USB supply can range from 4.4 V to 5.5 V, per USB specifications.
+- Do not connect the VUSB/VBUS/5V pin to any of the other pins on the board. Supplying 5 V to other pins can permanently damage the board.
 
 ---
 
 ## Requirements for supported boards
 
 There are two main requirements for using the "VUSB" pin:
 
-* The board must be powered via USB. If you power the board through other means—such as a battery connected to Vin or a 3.3 V supply—the pin will not output anything.
-* On some boards, the VUSB line must be enabled by connecting a pair of jumper pads.
+- The board must be powered via USB. If you power the board through other means—such as a battery connected to Vin or a 3.3 V supply—the pin will not output anything.
+- On some boards, the VUSB line must be enabled by connecting a pair of jumper pads.
 
 The table below summarizes which Nano boards support 5 V output, what the output pin is called, and whether any action is required to enable it.