ChangeLog

2010-07-25  Aaron Maxwell  <amax@resymbol.net>

	* S3/Config.py, testsuite/etc/brokenlink.png, testsuite/etc/more/linked-dir, testsuite/etc/more/give-me-more.txt, testsuite/etc/linked.png, testsuite/etc/linked1.png, run-tests.py, s3cmd.1, s3cmd:
	  Option to follow local symlinks for sync and put (--follow-symlinks option), including tests and documentation
	* run-tests.py:
	  --bucket-prefix option, to allow different developers to run tests in their own sandbox

2010-07-08  Michal Ludvig  <mludvig@logix.net.nz>

	* run-tests.py, testsuite/crappy-file-name.tar.gz:
	  Updated testsuite, work around a problem with [s3cmd cp]
	  when the source file contains '?' or '\x7f' 
	  (where the inability to copy '?' is especially annoying).

2010-07-08  Michal Ludvig  <mludvig@logix.net.nz>

	* S3/Utils.py, S3/S3Uri.py: Fixed names after moving 
	  functions between modules.

2010-06-29  Timothee Groleau <kde@timotheegroleau.com>

	* S3/ACL.py: Fix isAnonRead method on Grantees
	* ChangeLog: Update name of contributor for Timothee Groleau

2010-06-13  Michal Ludvig  <mludvig@logix.net.nz>

	* s3cmd, S3/CloudFront.py: Both [accesslog] and [cfmodify] 
	  access logging can now be disabled with --no-access-logging

2010-06-13  Michal Ludvig  <mludvig@logix.net.nz>

	* S3/CloudFront.py: Allow s3:// URI as well as cf:// URI 
	  for most CloudFront-related commands.

2010-06-12  Michal Ludvig  <mludvig@logix.net.nz>

	* s3cmd, S3/CloudFront.py, S3/Config.py: Support access 
	  logging for CloudFront distributions.
	* S3/S3.py, S3/Utils.py: Moved some functions to Utils.py
	  to make them available to CloudFront.py
	* NEWS: Document the above.

2010-05-27  Michal Ludvig  <mludvig@logix.net.nz>

	* S3/S3.py: Fix bucket listing for buckets with
	  over 1000 prefixes. (contributed by Timothee Groleau)
	* S3/S3.py: Fixed code formating.

2010-05-21  Michal Ludvig  <mludvig@logix.net.nz>

	* s3cmd, S3/S3.py: Added support for bucket locations
	  outside US/EU (i.e. us-west-1 and ap-southeast-1 as of now).

2010-05-21  Michal Ludvig  <mludvig@logix.net.nz>

	* s3cmd, S3/S3.py, S3/Config.py: Added --reduced-redundancy
	  switch for Reduced Redundancy Storage.

2010-05-20  Michal Ludvig  <mludvig@logix.net.nz>

	* s3cmd, S3/ACL.py, S3/Config.py: Support for --acl-grant
	  and --acl-revoke (contributed by Timothee Groleau)
	* s3cmd: Couple of fixes on top of the above commit.
	* s3cmd: Pre-parse ACL parameters in OptionS3ACL()

2010-05-20  Michal Ludvig  <mludvig@logix.net.nz>

	* S3/Exceptions.py, S3/S3.py: Some HTTP_400 exceptions 
	  are retriable.

2010-03-19  Michal Ludvig  <mludvig@logix.net.nz>

	* s3cmd, S3/ACL.py: Print all ACLs for a Grantee
	(one Grantee can have multiple different Grant entries)

2010-03-19  Michal Ludvig  <mludvig@logix.net.nz>

	* s3cmd: Enable bucket-level ACL setting
	* s3cmd, S3/AccessLog.py, ...: Added [accesslog] command.
	* s3cmd: Fix imports from S3.Utils

2009-12-10  Michal Ludvig  <mludvig@logix.net.nz>

	* s3cmd: Path separator conversion on Windows hosts.

2009-10-08  Michal Ludvig  <mludvig@logix.net.nz>

	* Released version 0.9.9.91
	  -------------------------

	* S3/PkgInfo.py: Updated to 0.9.9.91
	* NEWS: News for 0.9.9.91

2009-10-08  Michal Ludvig  <mludvig@logix.net.nz>

	* S3/S3.py: fixed reference to _max_retries.

2009-10-06  Michal Ludvig  <mludvig@logix.net.nz>

	* Released version 0.9.9.90
	  -------------------------

	* S3/PkgInfo.py: Updated to 0.9.9.90
	* NEWS: News for 0.9.9.90

2009-10-06  Michal Ludvig  <mludvig@logix.net.nz>

	* S3/S3.py: Introduce throttling on upload only after
	  second failure. I.e. first retry at full speed.
	* TODO: Updated with new ideas.

2009-06-02  Michal Ludvig  <michal@logix.cz>

	* s3cmd: New [fixbucket] command for fixing invalid object
	  names in a given Bucket. For instance names with &#x08; in
	  them (not sure how people manage to upload them but they do).
	* S3/S3.py, S3/Utils.py, S3/Config.py: Support methods for 
	  the above, plus advise user to run 'fixbucket' when XML parsing 
	  fails.
	* NEWS: Updated.
	
2009-05-29  Michal Ludvig  <michal@logix.cz>

	* S3/Utils.py: New function replace_nonprintables()
	* s3cmd: Filter local filenames through the above function
	  to avoid problems with uploaded filenames containing invalid 
	  XML entities, eg &#08; 
	* S3/S3.py: Warn if a non-printables char is passed to
	  urlencode_string() - they should have been replaced earlier 
	  in the processing.
	* run-tests.py, TODO, NEWS: Updated.
	* testsuite/crappy-file-name.tar.gz: Tarball with a crappy-named
	  file. Untar for the testsuite.

2009-05-29  Michal Ludvig  <michal@logix.cz>

	* testsuite/blahBlah/*: Added files needed for run-tests.py

2009-05-28  Michal Ludvig  <michal@logix.cz>

	* S3/Utils.py (dateS3toPython): Be more relaxed about
	  timestamps format.

2009-05-28  Michal Ludvig  <michal@logix.cz>

	* s3cmd, run-test.py, TODO, NEWS: Added --dry-run
	  and --exclude/--include for [setacl].
	* s3cmd, run-test.py, TODO, NEWS: Added --dry-run
	  and --exclude/--include for [del].

2009-05-28  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Support for recursive [cp] and [mv], including
	  multiple-source arguments, --include/--exclude,
	  --dry-run, etc.
	* run-tests.py: Tests for the above.
	* S3/S3.py: Preserve metadata (eg ACL or MIME type) 
	  during [cp] and [mv].
	* NEWS, TODO: Updated.

2009-05-28  Michal Ludvig  <michal@logix.cz>

	* run-tests.py: Added --verbose mode.

2009-05-27  Michal Ludvig  <michal@logix.cz>

	* NEWS: Added info about --verbatim.
	* TODO: Added more tasks.

2009-05-27  Michal Ludvig  <michal@logix.cz>

	* S3/SortedDict.py: Add case-sensitive mode.
	* s3cmd, S3/S3.py, S3/Config.py: Use SortedDict() in 
	  case-sensitive mode to avoid dropping filenames
	  differing only in capitalisation
	* run-tests.py: Testsuite for the above.
	* NEWS: Updated.

2009-03-20  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: Re-sign requests before retrial to avoid 
	  RequestTimeTooSkewed errors on failed long-running
	  uploads.
	  BTW 'request' now has its own class S3Request.

2009-03-04  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/Config.py, S3/S3.py: Support for --verbatim.

2009-02-25  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Fixed "put file.ext s3://bkt" (ie just the bucket name).
	* s3cmd: Fixed reporting of ImportError of S3 modules.
	* s3cmd: Fixed Error: global name 'real_filename' is not defined

2009-02-24  Michal Ludvig  <michal@logix.cz>

	* s3cmd: New command [sign]
	* S3/Utils.py: New function sign_string()
	* S3/S3.py, S3/CloudFront.py: Use sign_string().
	* NEWS: Updated.

2009-02-17  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.9
	  ----------------------

	* S3/PkgInfo.py: Updated to 0.9.9
	* NEWS: Compile a big news list for 0.9.9

2009-02-17  Michal Ludvig  <michal@logix.cz>

	* s3cmd.1: Document all the new options and commands.
	* s3cmd, S3/Config.py: Updated some help texts. Removed
	  option --debug-syncmatch along the way (because --dry-run
	  with --debug is good enough).
	* TODO: Updated.

2009-02-16  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Check Python version >= 2.4 as soon as possible.

2009-02-14  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/Config.py, S3/S3.py: Added --add-header option.
	* NEWS: Documented --add-header.
	* run-tests.py: Fixed for new messages.

2009-02-14  Michal Ludvig  <michal@logix.cz>

	* README: Updated for 0.9.9
	* s3cmd, S3/PkgInfo.py, s3cmd.1: Replaced project 
	  URLs with http://s3tools.org
	* NEWS: Improved message.

2009-02-12  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Added --list-md5 for 'ls' command.
	* S3/Config.py: New setting list_md5

2009-02-12  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Set Content-Length header for requests with 'body'.
	* s3cmd: And send it for requests with no body as well...

2009-02-02  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.9-rc3
	  --------------------------

	* S3/PkgInfo.py, NEWS: Updated for 0.9.9-rc3

2009-02-01  Michal Ludvig  <michal@logix.cz>

	* S3/Exceptions.py: Correct S3Exception.__str__() to
	  avoid crash in S3Error() subclass. Reported by '~t2~'.
	* NEWS: Updated.

2009-01-30  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.9-rc2
	  --------------------------

	* S3/PkgInfo.py, NEWS, TODO: Updated for 0.9.9-rc2

2009-01-30  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Under some circumstance s3cmd crashed
	  when put/get/sync had 0 files to transmit. Fixed now.

2009-01-28  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Output 'delete:' in --dry-run only when
	  used together with --delete-removed. Otherwise
	  the user will think that without --dry-run it
	  would really delete the files.

2009-01-27  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.9-rc1
	  --------------------------

	* S3/PkgInfo.py, NEWS, TODO: Updated for 0.9.9-rc1

2009-01-26  Michal Ludvig  <michal@logix.cz>

	* Merged CloudFront support from branches/s3cmd-airlock
	  See the ChangeLog in that branch for details.

2009-01-25  W. Tell  <w_tell -at- sourceforge>

	* s3cmd: Implemented --include and friends.

2009-01-25  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Enabled --dry-run and --exclude for 'put' and 'get'.
	* S3/Exceptions.py: Remove DeprecationWarning about 
	  BaseException.message in Python 2.6
	* s3cmd: Rewritten gpg_command() to use subprocess.Popen()
	  instead of os.popen4() deprecated in 2.6
	* TODO: Note about failing GPG.

2009-01-22  Michal Ludvig  <michal@logix.cz>

	* S3/Config.py: guess_mime_type = True (will affect new 
	  installations only).

2009-01-22  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.9-pre5
	  ---------------------------

	* S3/PkgInfo.py, NEWS, TODO: Updated for 0.9.9-pre5

2009-01-22  Michal Ludvig  <michal@logix.cz>

	* run-tests.py: Updated paths for the new sync
	  semantics.
	* s3cmd, S3/S3.py: Small fixes to make testsuite happy.

2009-01-21  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Migrated 'sync' local->remote to the new
	  scheme with fetch_{local,remote}_list().
	  Enabled --dry-run for 'sync'.

2009-01-20  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Migrated 'sync' remote->local to the new
	  scheme with fetch_{local,remote}_list().
	  Changed fetch_remote_list() to return dict() compatible
	  with fetch_local_list().
	  Re-implemented --exclude / --include processing.
	* S3/Utils.py: functions for parsing RFC822 dates (for HTTP
	  header responses).
	* S3/Config.py: placeholders for --include.

2009-01-15  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/S3Uri.py, NEWS: Support for recursive 'put'.

2009-01-13  Michal Ludvig  <michal@logix.cz>

	* TODO: Updated.
	* s3cmd: renamed (fetch_)remote_keys to remote_list and
	  a few other renames for consistency.

2009-01-08  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: Some errors during file upload were incorrectly 
	  interpreted as MD5 mismatch. (bug #2384990)
	* S3/ACL.py: Move attributes from class to instance.
	* run-tests.py: Tests for ACL.
	* s3cmd: Minor messages changes.

2009-01-07  Michal Ludvig  <michal@logix.cz>

	* s3cmd: New command 'setacl'.
	* S3/S3.py: Implemented set_acl().
	* S3/ACL.py: Fill in <Owner/> tag in ACL XML.
	* NEWS: Info about 'setacl'.

2009-01-07  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Factored remote_keys generation from cmd_object_get()
	  to fetch_remote_keys().
	* s3cmd: Display Public URL in 'info' for AnonRead objects.
	* S3/ACL.py: Generate XML from a current list of Grantees

2009-01-07  Michal Ludvig  <michal@logix.cz>

	* S3/ACL.py: Keep ACL internally as a list of of 'Grantee' objects.
	* S3/Utils.py: Fix crash in stripNameSpace() when the XML has no NS.

2009-01-07  Michal Ludvig  <michal@logix.cz>

	* S3/ACL.py: New object for handling ACL issues.
	* S3/S3.py: Moved most of S3.get_acl() to ACL class.
	* S3/Utils.py: Reworked XML helpers - remove XMLNS before 
	  parsing the input XML to avoid having all Tags prefixed
	  with {XMLNS} by ElementTree.

2009-01-03  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Don't fail when neither $HOME nor %USERPROFILE% is set.
	  (fixes #2483388)

2009-01-01  W. Tell  <w_tell -at- sourceforge>

	* S3/S3.py, S3/Utils.py: Use 'hashlib' instead of md5 and sha 
	  modules to avoid Python 2.6 warnings.

2008-12-31  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.9-pre4
	  ---------------------------

2008-12-31  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Reworked internal handling of unicode vs encoded filenames.
	  Should replace unknown characters with '?' instead of baling out.

2008-12-31  Michal Ludvig  <michal@logix.cz>

	* run-tests.py: Display system encoding in use.
	* s3cmd: Print a nice error message when --exclude-from
	  file is not readable.
	* S3/PkgInfo.py: Bumped up version to 0.9.9-pre4
	* S3/Exceptions.py: Added missing imports.
	* NEWS: Updated.
	* testsuite: reorganised UTF-8 files, added GBK encoding files,
	  moved encoding-specific files to 'tar.gz' archives, removed 
	  unicode dir.
	* run-tests.py: Adapted to the above change.
	* run-tests.sh: removed.
	* testsuite/exclude.encodings: Added.
	* run-tests.py: Don't assume utf-8, use preferred encoding 
	  instead.
	* s3cmd, S3/Utils.py, S3/Exceptions.py, S3/Progress.py,
	  S3/Config.py, S3/S3.py: Added --encoding switch and 
	  Config.encoding variable. Don't assume utf-8 for filesystem
	  and terminal output anymore.
	* s3cmd: Avoid ZeroDivisionError on fast links.
	* s3cmd: Unicodised all info() output.

2008-12-30  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Replace unknown Unicode characters with '?'
	  to avoid UnicodeEncodeError's. Also make all output strings
	  unicode.
	* run-tests.py: Exit on failed test. Fixed order of tests.

2008-12-29  Michal Ludvig  <michal@logix.cz>

	* TODO, NEWS: Updated
	* s3cmd: Improved wildcard get.
	* run-tests.py: Improved testsuite, added parameters support
	  to run only specified tests, cleaned up win/posix integration.
	* S3/Exception.py: Python 2.4 doesn't automatically set 
	  Exception.message.

2008-12-29  Michal Ludvig  <michal@logix.cz>

	* s3cmd, run-tests.py: Make it work on Windows.

2008-12-26  Michal Ludvig  <michal@logix.cz>

	* setup.cfg: Remove explicit install prefix. That should fix
	  Mac OS X and Windows "setup.py install" runs.

2008-12-22  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/S3.py, S3/Progress.py: Display "[X of Y]"
	  in --progress mode.
	* s3cmd, S3/Config.py: Implemented recursive [get].
	  Added --skip-existing option for [get] and [sync]. 

2008-12-17  Michal Ludvig  <michal@logix.cz>

	* TODO: Updated

2008-12-14  Michal Ludvig  <michal@logix.cz>

	* S3/Progress.py: Restructured import Utils to avoid import
	  conflicts.

2008-12-12  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Better Exception output. Print sys.path on ImportError,
	  don't print backtrace on KeyboardInterrupt

2008-12-11  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Support for multiple sources in 'get' command.

2008-12-10  Michal Ludvig  <michal@logix.cz>

	* TODO: Updated list.
	* s3cmd: Don't display download/upload completed message
	  in --progress mode.
	* S3/S3.py: Pass src/dst names down to Progress class.
	* S3/Progress.py: added new class ProgressCR - apparently 
	  ProgressANSI doesn't work on MacOS-X (and perhaps elsewhere).
	* S3/Config.py: Default progress meter is now ProgressCR
	* s3cmd: Updated email address for reporting bugs.

2008-12-02  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/S3.py, NEWS: Support for (non-)recursive 'ls'

2008-12-01  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.9-pre3
	  ---------------------------

	* S3/PkgInfo.py: Bumped up version to 0.9.9-pre3

2008-12-01  Michal Ludvig  <michal@logix.cz>

	* run-tests.py: Added a lot of new tests.
	* testsuite/etc/logo.png: New file.

2008-11-30  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: object_get() -- make start_position argument optional.

2008-11-29  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Delete local files with "sync --delete-removed"

2008-11-25  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/Progress.py: Fixed Unicode output in Progress meter.
	* s3cmd: Fixed 'del --recursive' without prefix (i.e. all objects).
	* TODO: Updated list.
	* upload-to-sf.sh: Helper script.
	* S3/PkgInfo.py: Bumped up version to 0.9.9-pre2+svn

2008-11-24  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.9-pre2
	  ------------------------

	* S3/PkgInfo.py: Bumped up version to 0.9.9-pre2
	* NEWS: Added 0.9.9-pre2

2008-11-24  Michal Ludvig  <michal@logix.cz>

	* s3cmd, s3cmd.1, S3/S3.py: Display or don't display progress meter
	  default depends on whether we're on TTY (console) or not.

2008-11-24  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Fixed 'get' conflict.
	* s3cmd.1, TODO: Document 'mv' command.

2008-11-24  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py, s3cmd, S3/Config.py, s3cmd.1: Added --continue for
	  'get' command, improved 'get' failure resiliency.
	* S3/Progress.py: Support for progress meter not starting in 0.
	* S3/S3.py: improved retrying in send_request() and send_file()

2008-11-24  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/S3.py, NEWS: "s3cmd mv" for moving objects

2008-11-24  Michal Ludvig  <michal@logix.cz>

	* S3/Utils.py: Common XML parser.
	* s3cmd, S3/Exeptions.py: Print info message on Error.

2008-11-21  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Support for 'cp' command.
	* S3/S3.py: Added S3.object.copy() method.
	* s3cmd.1: Document 'cp' command.
	* NEWS: Let everyone know ;-)
	Thanks Andrew Ryan for a patch proposal!
	https://sourceforge.net/forum/forum.php?thread_id=2346987&forum_id=618865

2008-11-17  Michal Ludvig  <michal@logix.cz>

	* S3/Progress.py: Two progress meter implementations.
	* S3/Config.py, s3cmd: New --progress / --no-progress parameters
	  and Config() members.
	* S3/S3.py: Call Progress() in send_file()/recv_file()
	* NEWS: Let everyone know ;-)

2008-11-16  Michal Ludvig  <michal@logix.cz>

	* NEWS: Fetch 0.9.8.4 release news from 0.9.8.x branch.

2008-11-16  Michal Ludvig  <michal@logix.cz>

	Merge from 0.9.8.x branch, rel 251:
	* S3/S3.py: Adjusting previous commit (orig 249) - it's not a good idea 
	  to retry ALL failures. Especially not those code=4xx where AmazonS3 
	  servers are not happy with our requests.
	Merge from 0.9.8.x branch, rel 249:
	* S3/S3.py, S3/Exception.py: Re-issue failed requests in S3.send_request()
	Merge from 0.9.8.x branch, rel 248:
	* s3cmd: Don't leak open filehandles in sync. Thx Patrick Linskey for report.
	Merge from 0.9.8.x branch, rel 247:
	* s3cmd: Re-raise the right exception.
	Merge from 0.9.8.x branch, rel 246:
	* s3cmd, S3/S3.py, S3/Exceptions.py: Don't abort 'sync' or 'put' on files
	  that can't be open (e.g. Permision denied). Print a warning and skip over
	  instead.
	Merge from 0.9.8.x branch, rel 245:
	* S3/S3.py: Escape parameters in strings. Fixes sync to and 
	  ls of directories with spaces. (Thx Lubomir Rintel from Fedora Project)
	Merge from 0.9.8.x branch, rel 244:
	* s3cmd: Unicode brainfuck again. This time force all output
	  in UTF-8, will see how many complaints we'll get...

2008-09-16  Michal Ludvig  <michal@logix.cz>

	* NEWS: s3cmd 0.9.8.4 released from branches/0.9.8.x SVN branch.

2008-09-16  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: Don't run into ZeroDivisionError when speed counter
	  returns 0s elapsed on upload/download file.

2008-09-15  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/S3.py, S3/Utils.py, S3/S3Uri.py, S3/Exceptions.py:
	  Yet anoter Unicode round. Unicodised all command line arguments 
	  before processing.

2008-09-15  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: "s3cmd mb" can create upper-case buckets again
	  in US. Non-US (e.g. EU) bucket names must conform to strict
	  DNS-rules.
	* S3/S3Uri.py: Display public URLs correctly for non-DNS buckets.

2008-09-10  Michal Ludvig  <michal@logix.cz>

	* testsuite, run-tests.py: Added testsuite with first few tests.

2008-09-10  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/S3Uri.py, S3/S3.py: All internal representations of
	  S3Uri()s are Unicode (i.e. not UTF-8 but type()==unicode). It 
	  still doesn't work on non-UTF8 systems though.

2008-09-04  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Rework UTF-8 output to keep sys.stdout untouched (or it'd
	  break 's3cmd get' to stdout for binary files).

2008-09-03  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/S3.py, S3/Config.py: Removed --use-old-connect-method
	  again. Autodetect the need for old connect method instead.

2008-09-03  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/S3.py: Make --verbose mode more useful and default 
	  mode less verbose.

2008-09-03  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/Config.py: [rb] Allow removal of non-empty buckets
	  with --force.
	  [mb, rb] Allow multiple arguments, i.e. create or remove
	  multiple buckets at once.
	  [del] Perform recursive removal with --recursive (or -r).

2008-09-01  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Refuse 'sync' together with '--encrypt'.
	* S3/S3.py: removed object_{get,put,delete}_uri() functions
	  and made object_{get,put,delete}() accept URI instead of 
	  bucket/object parameters.

2008-09-01  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Bumped up version to 0.9.9-pre1

2008-09-01  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/S3.py, S3/Config.py: Allow access to upper-case
	  named buckets again with --use-old-connect-method 
	  (uses http://s3.amazonaws.com/bucket/object instead of
	  http://bucket.s3.amazonaws.com/object)

2008-08-19  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Always output UTF-8, even on output redirects.

2008-08-01  Michal Ludvig  <michal@logix.cz>

	* TODO: Add some items

2008-07-29  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.8.3
	  ------------------------

2008-07-29  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Bumped up version to 0.9.8.3
	* NEWS: Added 0.9.8.3

2008-07-29  Michal Ludvig  <michal@logix.cz>

	* S3/Utils.py (hash_file_md5): Hash files in 32kB chunks
	  instead of reading it all up to a memory first to avoid
	  OOM on large files.

2008-07-07  Michal Ludvig  <michal@logix.cz>

	* s3cmd.1: couple of syntax fixes from Mikhail Gusarov

2008-07-03  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.8.2
	  ------------------------

2008-07-03  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Bumped up version to 0.9.8.2
	* NEWS: Added 0.9.8.2
	* s3cmd: Print version info on 'unexpected error' output.

2008-06-30  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: Re-upload when Amazon doesn't send ETag
	  in PUT response. It happens from time to time for
	  unknown reasons. Thanks "Burtc" for report and
	  "hermzz" for fix.

2008-06-27  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.8.1
	  ------------------------

2008-06-27  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Bumped up version to 0.9.8.1
	* NEWS: Added 0.9.8.1
	* s3cmd: make 'cfg' global
	* run-tests.sh: Sort-of testsuite

2008-06-23  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.8
	  ----------------------

2008-06-23  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Bumped up version to 0.9.8
	* NEWS: Added 0.9.8
	* TODO: Removed completed tasks

2008-06-23  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Last-minute compatibility fixes for Python 2.4
	* s3cmd, s3cmd.1: --debug-exclude is an alias for --debug-syncmatch
	* s3cmd: Don't require $HOME env variable to be set.
	  Fixes #2000133
	* s3cmd: Wrapped all execution in a try/except block
	  to catch all exceptions and ask for a report.

2008-06-18  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Version 0.9.8-rc3

2008-06-18  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: Bucket name can't contain upper-case letters (S3/DNS limitation).

2008-06-12  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Version 0.9.8-rc2

2008-06-12  Michal Ludvig  <michal@logix.cz>

	* s3cmd, s3cmd.1: Added GLOB (shell-style wildcard) exclude, renamed
	  orig regexp-style --exclude to --rexclude

2008-06-11  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Version 0.9.8-rc1

2008-06-11  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Remove python 2.5 specific code (try/except/finally 
	  block) and make s3cmd compatible with python 2.4 again.
	* s3cmd, S3/Config.py, s3cmd.1: Added --exclude-from and --debug-syncmatch
	  switches for sync.

2008-06-10  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Added --exclude switch for sync.
	* s3cmd.1, NEWS: Document --exclude

2008-06-05  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.7
	  ----------------------

2008-06-05  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Bumped up version to 0.9.7
	* NEWS: Added 0.9.7
	* TODO: Removed completed tasks
	* s3cmd, s3cmd.1: Updated help texts, 
	  removed --dry-run option as it's not implemented.
	
2008-06-05  Michal Ludvig  <michal@logix.cz>

	* S3/Config.py: Store more file attributes in sync to S3.
	* s3cmd: Make sync remote2local more error-resilient.

2008-06-04  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Implemented cmd_sync_remote2local() for restoring
	  backup from S3 to a local filesystem
	* S3/S3.py: S3.object_get_uri() now requires writable stream 
	  and not a path name.
	* S3/Utils.py: Added mkdir_with_parents()

2008-06-04  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Refactored cmd_sync() in preparation 
	  for remote->local sync.

2008-04-30  Michal Ludvig  <michal@logix.cz>

	* s3db, S3/SimpleDB.py: Implemented almost full SimpleDB API.

2008-04-29  Michal Ludvig  <michal@logix.cz>

	* s3db, S3/SimpleDB.py: Initial support for Amazon SimpleDB. 
	  For now implements ListDomains() call and most of the 
	  infrastructure required for request creation.

2008-04-29  Michal Ludvig  <michal@logix.cz>

	* S3/Exceptions.py: Exceptions moved out of S3.S3
	* S3/SortedDict.py: rewritten from scratch to preserve
	  case of keys while still sorting in case-ignore mode.

2008-04-28  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: send_file() now computes MD5 sum of the file
	  being uploaded, compares with ETag returned by Amazon
	  and retries upload if they don't match.

2008-03-05  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/S3.py, S3/Utils.py: Throttle upload speed and retry 
	  when upload failed.
	  Report download/upload speed and time elapsed.

2008-02-28  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.6
	  ----------------------

2008-02-28  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: bumped up version to 0.9.6
	* NEWS: What's new in 0.9.6

2008-02-27  Michal Ludvig  <michal@logix.cz>

	* s3cmd, s3cmd.1: Updated help and man page.
	* S3/S3.py, S3/Utils.py, s3cmd: Support for 's3cmd info' command.
	* s3cmd: Fix crash when 'sync'ing files with unresolvable owner uid/gid.
	* S3/S3.py, S3/Utils.py: open files in binary mode (otherwise windows
	  users have problems).
	* S3/S3.py: modify 'x-amz-date' format (problems reported on MacOS X). 
	  Thanks Jon Larkowski for fix.

2008-02-27  Michal Ludvig  <michal@logix.cz>

	* TODO: Updated wishlist.

2008-02-11  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: Properly follow RedirectPermanent responses for EU buckets
	* S3/S3.py: Create public buckets with -P (#1837328)
	* S3/S3.py, s3cmd: Correctly display public URL on uploads.
	* S3/S3.py, S3/Config.py: Support for MIME types. Both 
	default and guessing. Fixes bug #1872192 (Thanks Martin Herr)

2007-11-13  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.5
	  ----------------------

2007-11-13  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: Support for buckets stored in Europe, access now 
	  goes via <bucket>.s3.amazonaws.com where possible.

2007-11-12  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Support for storing file attributes (like ownership, 
	  mode, etc) in sync operation.
	* s3cmd, S3/S3.py: New command 'ib' to get information about 
	  bucket (only 'LocationConstraint' supported for now).

2007-10-01  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Fix typo in argument name (patch
	  from Kim-Minh KAPLAN, SF #1804808)

2007-09-25  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Exit with error code on error (patch
	  from Kim-Minh KAPLAN, SF #1800583)

2007-09-25  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: Don't fail if bucket listing doesn't have
	  <IsTruncated> node.
	* s3cmd: Create ~/.s3cfg with 0600 permissions.

2007-09-13  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Improved 'sync'
	* S3/S3.py: Support for buckets with over 1000 objects.

2007-09-03  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Small tweaks to --configure workflow.

2007-09-02  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Initial support for 'sync' operation. For
	  now only local->s3 direction. In this version doesn't
	  work well with non-ASCII filenames and doesn't support
	  encryption.

2007-08-24  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/Util.py: More ElementTree imports cleanup

2007-08-19  Michal Ludvig  <michal@logix.cz>

	* NEWS: Added news for 0.9.5

2007-08-19  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Better handling of multiple arguments for put, get and del

2007-08-14  Michal Ludvig  <michal@logix.cz>

	* setup.py, S3/Utils.py: Try import xml.etree.ElementTree
	  or elementtree.ElementTree module.

2007-08-14  Michal Ludvig  <michal@logix.cz>

	* s3cmd.1: Add info about --encrypt parameter.

2007-08-14  Michal Ludvig  <michal@logix.cz>

	* S3/PkgInfo.py: Bump up version to 0.9.5-pre

2007-08-13  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.4
	  ----------------------

2007-08-13  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py: Added function urlencode_string() that encodes
	  non-ascii characters in object name before sending it to S3.

2007-08-13  Michal Ludvig  <michal@logix.cz>

	* README: Updated Amazon S3 pricing overview

2007-08-13  Michal Ludvig  <michal@logix.cz>

	* s3cmd, S3/Config.py, S3/S3.py: HTTPS support

2007-07-20  Michal Ludvig  <michal@logix.cz>

	* setup.py: Check correct Python version and ElementTree availability.

2007-07-05  Michal Ludvig  <michal@logix.cz>

	* s3cmd: --configure support for Proxy
	* S3/S3.py: HTTP proxy support from
	  John D. Rowell <jdrowell@exerciseyourbrain.com>

2007-06-19  Michal Ludvig  <michal@logix.cz>

	* setup.py: Check for S3CMD_PACKAGING and don't install
	  manpages and docs if defined.
	* INSTALL: Document the above change.
	* MANIFEST.in: Include uncompressed manpage

2007-06-17  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Added encryption key support to --configure
	* S3/PkgInfo.py: Bump up version to 0.9.4-pre
	* setup.py: Cleaned up some rpm-specific stuff that 
	  caused problems to Debian packager Mikhail Gusarov
	* setup.cfg: Removed [bdist_rpm] section
	* MANIFEST.in: Include S3/*.py

2007-06-16  Michal Ludvig  <michal@logix.cz>

	* s3cmd.1: Syntax fixes from Mikhail Gusarov <dottedmag@dottedmag.net>

2007-05-27  Michal Ludvig  <michal@logix.cz>

	* Support for on-the-fly GPG encryption.

2007-05-26  Michal Ludvig  <michal@logix.cz>

	* s3cmd.1: Add info about "s3cmd du" command.

2007-05-26  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.3
	  ----------------------

2007-05-26  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Patch from Basil Shubin <basil.shubin@gmail.com>
	  adding support for "s3cmd du" command.
	* s3cmd: Modified output format of "s3cmd du" to conform
	  with unix "du".
	* setup.cfg: Require Python 2.5 in RPM. Otherwise it needs
	  to require additional python modules (e.g. ElementTree)
	  which may have different names in different distros. It's 
	  indeed still possible to manually install s3cmd with 
	  Python 2.4 and appropriate modules.

2007-04-09  Michal Ludvig  <michal@logix.cz>

	* Released version 0.9.2
	  ----------------------

2007-04-09  Michal Ludvig  <michal@logix.cz>

	* s3cmd.1: Added manpage
	* Updated infrastructure files to create "better"
	  distribution archives.

2007-03-26  Michal Ludvig  <michal@logix.cz>

	* setup.py, S3/PkgInfo.py: Move package info out of setup.py
	* s3cmd: new parameter --version
	* s3cmd, S3/S3Uri.py: Output public HTTP URL for objects
	  stored with Public ACL.
	  
2007-02-28  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Verify supplied accesskey and secretkey
	  in interactive configuration path.
	* S3/Config.py: Hide access key and secret key
	  from debug output.
	* S3/S3.py: Modify S3Error exception to work
	  in python 2.4 (=> don't expect Exception is
	  a new-style class).
	* s3cmd: Updated for the above change.

2007-02-19  Michal Ludvig  <michal@logix.cz>

	* NEWS, INSTALL, README, setup.py: Added
	  more documentation.

2007-02-19  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py, s3cmd: New feature - allow "get" to stdout

2007-02-19  Michal Ludvig  <michal@logix.cz>

	* S3/S3fs.py: Removed (development moved to branch s3fs-devel).

2007-02-08  Michal Ludvig  <michal@logix.cz>

	* S3/S3fs.py: 
	  - Implemented mknod()
	  - Can create directory structure
	  - Rewritten to use SQLite3. Currently can create
	    the filesystem, and a root inode.

2007-02-07  Michal Ludvig  <michal@logix.cz>

	* s3cmd (from /s3py:74): Renamed SVN top-level project
	  s3py to s3cmd

2007-02-07  Michal Ludvig  <michal@logix.cz>

	* setup.cfg: Only require Python 2.4, not 2.5
	* S3/Config.py: Removed show_uri - no longer needed,
	  it's now default

2007-02-07  Michal Ludvig  <michal@logix.cz>

	* setup.py
	  - Version 0.9.1

2007-02-07  Michal Ludvig  <michal@logix.cz>

	* s3cmd: Change all "exit()" calls to "sys.exit()"
	  and allow for python 2.4
	* S3/S3.py: Removed dependency on hashlib -> allow for python 2.4

2007-01-27  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py, S3/S3Uri.py: Case insensitive regex in S3Uri.py

2007-01-26  Michal Ludvig  <michal@logix.cz>

	* S3/S3fs.py: Added support for stroing/loading inodes.
	  No data yet however.

2007-01-26  Michal Ludvig  <michal@logix.cz>

	* S3/S3fs.py: Initial version of S3fs module. 
	  Can create filesystem via "S3fs.mkfs()"

2007-01-26  Michal Ludvig  <michal@logix.cz>

	* S3/BidirMap.py, S3/Config.py, S3/S3.py, S3/S3Uri.py,
	  S3/SortedDict.py, S3/Utils.py, s3cmd: Added headers with
	  copyright to all files
	* S3/S3.py, S3/S3Uri.py: Removed S3.compose_uri(), introduced
	  S3UriS3.compose_uri() instead.

2007-01-26  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py, S3/S3Uri.py, s3cmd: 
	  - Converted all users of parse_uri to S3Uri class API
	  - Removed "cp" command again. Will have to use 'put'
	    and 'get' for now.

2007-01-25  Michal Ludvig  <michal@logix.cz>

	* S3/S3Uri.py: New module S3/S3Uri.py
	* S3/S3.py, s3cmd: Converted "put" operation to use
	  the new S3Uri class.

2007-01-24  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py
	* s3cmd
	  - Added 'cp' command
	  - Renamed parse_s3_uri to parse_uri (this will go away anyway)

2007-01-19  Michal Ludvig  <michal@logix.cz>

	* setup.cfg
	* setup.py
	  - Include README into tarballs

2007-01-19  Michal Ludvig  <michal@logix.cz>

	* README
	  - Added comprehensive README file

2007-01-19  Michal Ludvig  <michal@logix.cz>

	* setup.cfg
	* setup.py
	  - Added configuration for setup.py sdist

2007-01-19  Michal Ludvig  <michal@logix.cz>

	* S3/Config.py
	* s3cmd
	  - Added interactive configurator (--configure)
	  - Added config dumper (--dump-config)
	  - Improved --help output

2007-01-19  Michal Ludvig  <michal@logix.cz>

	* setup.cfg
	* setup.py
	  Added info for building RPM packages.

2007-01-18  Michal Ludvig  <michal@logix.cz>

	* S3/Config.py
	* S3/S3.py
	* s3cmd
	  Moved class Config from S3/S3.py to S3/Config.py

2007-01-18  Michal Ludvig  <michal@logix.cz>

	* S3/Config.py (from /s3py/trunk/S3/ConfigParser.py:47)
	* S3/ConfigParser.py
	* S3/S3.py
	  Renamed S3/ConfigParser.py to S3/Config.py

2007-01-18  Michal Ludvig  <michal@logix.cz>

	* s3cmd
	  Added info about homepage

2007-01-17  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py
	* s3cmd
	  - Use prefix for listings if specified.
	  - List all commands in --help

2007-01-16  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py
	* s3cmd
	  Major rework of Config class:
	  - Renamed from AwsConfig to Config
	  - Converted to Singleton (see Config.__new__() and an article on
	    Wikipedia)
	  - No more explicit listing of options - use introspection to get them
	    (class variables that of type str, int or bool that don't start with
	    underscore)
	  - Check values read from config file and verify their type.
	  
	  Added OptionMimeType and -m/-M options. Not yet implemented
	  functionality in the rest of S3/S3.py

2007-01-15  Michal Ludvig  <michal@logix.cz>

	* S3/S3.py
	* s3cmd
	  - Merged list-buckets and bucket-list-objects operations into
	    a single 'ls' command.
	  - New parameter -P for uploading publicly readable objects

2007-01-14  Michal Ludvig  <michal@logix.cz>

	* s3.py
	* setup.py
	  Renamed s3.py to s3cmd (take 2)

2007-01-14  Michal Ludvig  <michal@logix.cz>

	* s3cmd (from /s3py/trunk/s3.py:45)
	  Renamed s3.py to s3cmd

2007-01-14  Michal Ludvig  <michal@logix.cz>

	* S3
	* S3/S3.py
	* s3.py
	* setup.py
	  All classes from s3.py go to S3/S3.py
	  Added setup.py

2007-01-14  Michal Ludvig  <michal@logix.cz>

	* s3.py
	  Minor fix S3.utils -> S3.Utils

2007-01-14  Michal Ludvig  <michal@logix.cz>

	* .svnignore
	* BidirMap.py
	* ConfigParser.py
	* S3
	* S3/BidirMap.py (from /s3py/trunk/BidirMap.py:35)
	* S3/ConfigParser.py (from /s3py/trunk/ConfigParser.py:38)
	* S3/SortedDict.py (from /s3py/trunk/SortedDict.py:35)
	* S3/Utils.py (from /s3py/trunk/utils.py:39)
	* S3/__init__.py
	* SortedDict.py
	* s3.py
	* utils.py
	  Moved modules to their own package

2007-01-12  Michal Ludvig  <michal@logix.cz>

	* s3.py
	  Added "del" command
	  Converted all (?) commands to accept s3-uri
	  Added -u/--show-uri parameter

2007-01-11  Michal Ludvig  <michal@logix.cz>

	* s3.py
	  Verify MD5 on received files
	  Improved upload of multiple files
	  Initial S3-URI support (more tbd)

2007-01-11  Michal Ludvig  <michal@logix.cz>

	* s3.py
	  Minor fixes:
	  - store names of parsed files in AwsConfig
	  - Print total size with upload/download

2007-01-11  Michal Ludvig  <michal@logix.cz>

	* s3.py
	* utils.py
	  Added support for sending and receiving files.

2007-01-11  Michal Ludvig  <michal@logix.cz>

	* ConfigParser.py
	* s3.py
	  List all Objects in all Buckets command
	  Yet another logging improvement
	  Version check for Python 2.5 or higher

2007-01-11  Michal Ludvig  <michal@logix.cz>

	* ConfigParser.py
	* s3.py
	* utils.py
	  Added ConfigParser
	  Improved setting logging levels
	  It can now quite reliably list buckets and objects

2007-01-11  Michal Ludvig  <michal@logix.cz>

	* .svnignore
	  Added ignore list

2007-01-11  Michal Ludvig  <michal@logix.cz>

	* .svnignore
	* BidirMap.py
	* SortedDict.py
	* s3.py
	* utils.py
	  Initial import