Add ldr/pcr cluster configuration guideline

src/current/v23.2/set-up-physical-cluster-replication.md

@@ -33,7 +33,7 @@ The high-level steps in this tutorial are:
 
 ## Before you begin
 
-- Two separate CockroachDB clusters (primary and standby) with a minimum of three nodes each, and each using the same CockroachDB {{page.version.version}} version. The standby cluster should be the same version or one version ahead of the primary cluster.
+- Two separate CockroachDB clusters (primary and standby) with a minimum of three nodes each, and each using the same CockroachDB {{page.version.version}} version. The standby cluster should be the same version or one version ahead of the primary cluster. The primary and standby clusters must be configured with similar hardware profiles, number of nodes, and overall size. Significant discrepancies in the cluster configurations may result in degraded performance.
     - To set up each cluster, you can follow [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}). When you start each node in your cluster with the `cockroach start` command, you **must** pass the `--config-profile` flag with a `replication` value. Refer to cluster creation steps for the [primary cluster](#start-the-primary-cluster) and for the [standby cluster](#start-the-standby-cluster) for details.
     - The [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}) tutorial creates a self-signed certificate for each {{ site.data.products.core }} cluster. To create certificates signed by an external certificate authority, refer to [Create Security Certificates using OpenSSL]({% link {{ page.version.version }}/create-security-certificates-openssl.md %}).
 - All nodes in each cluster will need access to the Certificate Authority for the other cluster. Refer to [Copy certificates](#step-3-copy-certificates).

src/current/v24.1/set-up-physical-cluster-replication.md

@@ -35,7 +35,7 @@ The high-level steps in this tutorial are:
 
 ## Before you begin
 
-- Two separate CockroachDB clusters (primary and standby) with a minimum of three nodes each, and each using the same CockroachDB {{page.version.version}} version. The standby cluster should be the same version or one version ahead of the primary cluster.
+- Two separate CockroachDB clusters (primary and standby) with a minimum of three nodes each, and each using the same CockroachDB {{page.version.version}} version. The standby cluster should be the same version or one version ahead of the primary cluster. The primary and standby clusters must be configured with similar hardware profiles, number of nodes, and overall size. Significant discrepancies in the cluster configurations may result in degraded performance.
     - To set up each cluster, you can follow [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}). When you initialize the cluster with the [`cockroach init`]({% link {{ page.version.version }}/cockroach-init.md %}) command, you **must** pass the `--virtualized` or `--virtualized-empty` flag. Refer to the cluster creation steps for the [primary cluster](#initialize-the-primary-cluster) and for the [standby cluster](#initialize-the-standby-cluster) for details.
     - The [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}) tutorial creates a self-signed certificate for each {{ site.data.products.core }} cluster. To create certificates signed by an external certificate authority, refer to [Create Security Certificates using OpenSSL]({% link {{ page.version.version }}/create-security-certificates-openssl.md %}).
 - All nodes in each cluster will need access to the Certificate Authority for the other cluster. Refer to [Manage the cluster certificates](#step-3-manage-the-cluster-certificates).

src/current/v24.2/set-up-physical-cluster-replication.md

@@ -35,7 +35,7 @@ To set up PCR from an existing CockroachDB cluster, which will serve as the prim
 
 ## Before you begin
 
-- Two separate CockroachDB clusters (primary and standby) with a minimum of three nodes each, and each using the same CockroachDB {{page.version.version}} version. The standby cluster should be the same version or one version ahead of the primary cluster.
+- Two separate CockroachDB clusters (primary and standby) with a minimum of three nodes each, and each using the same CockroachDB {{page.version.version}} version. The standby cluster should be the same version or one version ahead of the primary cluster. The primary and standby clusters must be configured with similar hardware profiles, number of nodes, and overall size. Significant discrepancies in the cluster configurations may result in degraded performance.
     - To set up each cluster, you can follow [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}). When you initialize the cluster with the [`cockroach init`]({% link {{ page.version.version }}/cockroach-init.md %}) command, you **must** pass the `--virtualized` or `--virtualized-empty` flag. Refer to the cluster creation steps for the [primary cluster](#initialize-the-primary-cluster) and for the [standby cluster](#initialize-the-standby-cluster) for details.
     - The [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}) tutorial creates a self-signed certificate for each {{ site.data.products.core }} cluster. To create certificates signed by an external certificate authority, refer to [Create Security Certificates using OpenSSL]({% link {{ page.version.version }}/create-security-certificates-openssl.md %}).
 - All nodes in each cluster will need access to the Certificate Authority for the other cluster. Refer to [Manage the cluster certificates](#step-3-manage-the-cluster-certificates).

src/current/v24.3/set-up-logical-data-replication.md

@@ -30,7 +30,7 @@ If you're setting up bidirectional LDR, both clusters will act as a source and a
 
 You'll need:
 
-- Two separate {{ page.version.version }} CockroachDB {{ site.data.products.core }} clusters with connectivity between every node in both clusters. That is, all nodes in cluster A must be able to contact each node in cluster B and vice versa. The SQL advertised address should be the cluster node advertise address so that the LDR job can plan node-to-node connections between clusters for maximum performance.
+- Two separate {{ page.version.version }} CockroachDB {{ site.data.products.core }} clusters with connectivity between every node in both clusters. That is, all nodes in cluster A must be able to contact each node in cluster B and vice versa. The SQL advertised address should be the cluster node advertise address so that the LDR job can plan node-to-node connections between clusters for maximum performance. The source and destination clusters must be configured with similar hardware profiles, number of nodes, and overall size. Significant discrepancies in the cluster configurations may result in degraded performance.
     - To set up each cluster, you can follow [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}).
     - The [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}) tutorial creates a self-signed certificate for each {{ site.data.products.core }} cluster. To create certificates signed by an external certificate authority, refer to [Create Security Certificates using OpenSSL]({% link {{ page.version.version }}/create-security-certificates-openssl.md %}).
     - All nodes in each cluster will need access to the Certificate Authority for the other cluster. Refer to [Step 2. Connect from the destination to the source](#step-2-connect-from-the-destination-to-the-source).

src/current/v24.3/set-up-physical-cluster-replication.md

@@ -31,7 +31,7 @@ The high-level steps in this tutorial are:
 
 ## Before you begin
 
-- Two separate CockroachDB clusters (primary and standby) with a minimum of three nodes each, and each using the same CockroachDB {{page.version.version}} version. The standby cluster should be the same version or one version ahead of the primary cluster.
+- Two separate CockroachDB clusters (primary and standby) with a minimum of three nodes each, and each using the same CockroachDB {{page.version.version}} version. The standby cluster should be the same version or one version ahead of the primary cluster. The primary and standby clusters must be configured with similar hardware profiles, number of nodes, and overall size. Significant discrepancies in the cluster configurations may result in degraded performance.
     - To set up each cluster, you can follow [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}). When you initialize the cluster with the [`cockroach init`]({% link {{ page.version.version }}/cockroach-init.md %}) command, you **must** pass the `--virtualized` or `--virtualized-empty` flag. Refer to the cluster creation steps for the [primary cluster](#initialize-the-primary-cluster) and for the [standby cluster](#initialize-the-standby-cluster) for details.
     - The [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}) tutorial creates a self-signed certificate for each {{ site.data.products.core }} cluster. To create certificates signed by an external certificate authority, refer to [Create Security Certificates using OpenSSL]({% link {{ page.version.version }}/create-security-certificates-openssl.md %}).
 - All nodes in each cluster will need access to the Certificate Authority for the other cluster. Refer to [Manage the cluster certificates](#step-3-manage-the-cluster-certificates).

src/current/v25.1/set-up-logical-data-replication.md

@@ -36,7 +36,7 @@ If you're setting up bidirectional LDR, both clusters will act as a source and a
 
 You'll need:
 
-- Two separate {{ page.version.version }} CockroachDB {{ site.data.products.core }} clusters with connectivity between every node in both clusters. That is, all nodes in cluster A must be able to contact each node in cluster B and vice versa. The SQL advertised address should be the cluster node advertise address so that the LDR job can plan node-to-node connections between clusters for maximum performance.
+- Two separate {{ page.version.version }} CockroachDB {{ site.data.products.core }} clusters with connectivity between every node in both clusters. That is, all nodes in cluster A must be able to contact each node in cluster B and vice versa. The SQL advertised address should be the cluster node advertise address so that the LDR job can plan node-to-node connections between clusters for maximum performance. The source and destination clusters must be configured with similar hardware profiles, number of nodes, and overall size. Significant discrepancies in the cluster configurations may result in degraded performance.
     - To set up each cluster, you can follow [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}).
     - The [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}) tutorial creates a self-signed certificate for each {{ site.data.products.core }} cluster. To create certificates signed by an external certificate authority, refer to [Create Security Certificates using OpenSSL]({% link {{ page.version.version }}/create-security-certificates-openssl.md %}).
     - All nodes in each cluster will need access to the Certificate Authority for the other cluster. Refer to [Step 2. Connect from the destination to the source](#step-2-connect-from-the-destination-to-the-source).

src/current/v25.1/set-up-physical-cluster-replication.md

@@ -35,7 +35,7 @@ To set up PCR from an existing CockroachDB cluster, which will serve as the prim
 
 ## Before you begin
 
-- Two separate CockroachDB clusters (primary and standby) with a minimum of three nodes each, and each using the same CockroachDB {{page.version.version}} version. The standby cluster should be the same version or one version ahead of the primary cluster.
+- Two separate CockroachDB clusters (primary and standby) with a minimum of three nodes each, and each using the same CockroachDB {{page.version.version}} version. The standby cluster should be the same version or one version ahead of the primary cluster. The primary and standby clusters must be configured with similar hardware profiles, number of nodes, and overall size. Significant discrepancies in the cluster configurations may result in degraded performance.
     - To set up each cluster, you can follow [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}). When you initialize the cluster with the [`cockroach init`]({% link {{ page.version.version }}/cockroach-init.md %}) command, you **must** pass the `--virtualized` or `--virtualized-empty` flag. Refer to the cluster creation steps for the [primary cluster](#initialize-the-primary-cluster) and for the [standby cluster](#initialize-the-standby-cluster) for details.
     - The [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}) tutorial creates a self-signed certificate for each {{ site.data.products.core }} cluster. To create certificates signed by an external certificate authority, refer to [Create Security Certificates using OpenSSL]({% link {{ page.version.version }}/create-security-certificates-openssl.md %}).
 - All nodes in each cluster will need access to the Certificate Authority for the other cluster. Refer to [Manage the cluster certificates](#step-3-manage-the-cluster-certificates).

src/current/v25.2/set-up-logical-data-replication.md

@@ -44,7 +44,7 @@ If you're setting up bidirectional LDR, both clusters will act as a source and a
 
 You'll need:
 
-- Two separate {{ page.version.version }} CockroachDB {{ site.data.products.core }} clusters with connectivity between every node in both clusters. That is, all nodes in cluster A must be able to contact each node in cluster B and vice versa. The SQL advertised address should be the cluster node advertise address so that the LDR job can plan node-to-node connections between clusters for maximum performance.
+- Two separate {{ page.version.version }} CockroachDB {{ site.data.products.core }} clusters with connectivity between every node in both clusters. That is, all nodes in cluster A must be able to contact each node in cluster B and vice versa. The SQL advertised address should be the cluster node advertise address so that the LDR job can plan node-to-node connections between clusters for maximum performance. The source and destination clusters must be configured with similar hardware profiles, number of nodes, and overall size. Significant discrepancies in the cluster configurations may result in degraded performance.
     - To set up each cluster, you can follow [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}).
     - The [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}) tutorial creates a self-signed certificate for each {{ site.data.products.core }} cluster. To create certificates signed by an external certificate authority, refer to [Create Security Certificates using OpenSSL]({% link {{ page.version.version }}/create-security-certificates-openssl.md %}).
     - All nodes in each cluster will need access to the Certificate Authority for the other cluster. Refer to [Step 2. Connect from the destination to the source](#step-2-connect-from-the-destination-to-the-source).

src/current/v25.2/set-up-physical-cluster-replication.md

@@ -35,7 +35,7 @@ To set up PCR from an existing CockroachDB cluster, which will serve as the prim
 
 ## Before you begin
 
-- Two separate CockroachDB clusters (primary and standby) with a minimum of three nodes each, and each using the same CockroachDB {{page.version.version}} version. The standby cluster should be the same version or one version ahead of the primary cluster.
+- Two separate CockroachDB clusters (primary and standby) with a minimum of three nodes each, and each using the same CockroachDB {{page.version.version}} version. The standby cluster should be the same version or one version ahead of the primary cluster. The primary and standby clusters must be configured with similar hardware profiles, number of nodes, and overall size. Significant discrepancies in the cluster configurations may result in degraded performance.
     - To set up each cluster, you can follow [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}). When you initialize the cluster with the [`cockroach init`]({% link {{ page.version.version }}/cockroach-init.md %}) command, you **must** pass the `--virtualized` or `--virtualized-empty` flag. Refer to the cluster creation steps for the [primary cluster](#initialize-the-primary-cluster) and for the [standby cluster](#initialize-the-standby-cluster) for details.
     - The [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}) tutorial creates a self-signed certificate for each {{ site.data.products.core }} cluster. To create certificates signed by an external certificate authority, refer to [Create Security Certificates using OpenSSL]({% link {{ page.version.version }}/create-security-certificates-openssl.md %}).
 - All nodes in each cluster will need access to the Certificate Authority for the other cluster. Refer to [Manage the cluster certificates](#step-3-manage-the-cluster-certificates).

src/current/v25.3/set-up-logical-data-replication.md

@@ -44,7 +44,7 @@ If you're setting up bidirectional LDR, both clusters will act as a source and a
 
 You'll need:
 
-- Two separate {{ page.version.version }} CockroachDB {{ site.data.products.core }} clusters with connectivity between every node in both clusters. That is, all nodes in cluster A must be able to contact each node in cluster B and vice versa. The SQL advertised address should be the cluster node advertise address so that the LDR job can plan node-to-node connections between clusters for maximum performance.
+- Two separate {{ page.version.version }} CockroachDB {{ site.data.products.core }} clusters with connectivity between every node in both clusters. That is, all nodes in cluster A must be able to contact each node in cluster B and vice versa. The SQL advertised address should be the cluster node advertise address so that the LDR job can plan node-to-node connections between clusters for maximum performance. The source and destination clusters must be configured with similar hardware profiles, number of nodes, and overall size. Significant discrepancies in the cluster configurations may result in degraded performance.
     - To set up each cluster, you can follow [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}).
     - The [Deploy CockroachDB on Premises]({% link {{ page.version.version }}/deploy-cockroachdb-on-premises.md %}) tutorial creates a self-signed certificate for each {{ site.data.products.core }} cluster. To create certificates signed by an external certificate authority, refer to [Create Security Certificates using OpenSSL]({% link {{ page.version.version }}/create-security-certificates-openssl.md %}).
     - All nodes in each cluster will need access to the Certificate Authority for the other cluster. Refer to [Step 2. Connect from the destination to the source](#step-2-connect-from-the-destination-to-the-source).