Android および Compose Multiplatform 用の画像読み込みライブラリ。Coil の特徴:
Coil は、Coroutine Image Loader の頭字語です。
Compose ライブラリと ネットワーク ライブラリ をインポートします:
implementation("io.coil-kt.coil3:coil-compose:3.0.2")
+implementation("io.coil-kt.coil3:coil-network-okhttp:3.0.2")
+画像を読み込むには、AsyncImage を使用しますcomposable:
Coil の 完全なドキュメントはこちら をご覧ください。
Copyright 2024 Coil Contributors
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ https://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+
Android 및 Compose Multiplatform을 위한 이미지 로딩 라이브러리입니다. Coil의 특징은 다음과 같습니다.
코일은 Coroutine Image Loader**의 약자입니다.
Compose 라이브러리와 [네트워킹 라이브러리](https://coil-kt.github.io/coil/network/ 가져오기:
이미지를 로드하려면 AsyncImage를 사용하세요. 구성 가능:
Coil의 전체 문서는 여기에서에서 확인하세요.
Copyright 2024 Coil Contributors
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ https://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+
Библиотека загрузки изображений для Android и Compose Multiplatform. Coil:
Coil — это аббревиатура от: Coroutine Image Lloader.
Импортируйте библиотеку Compose и сетевую библиотеку:
implementation("io.coil-kt.coil3:coil-compose:3.0.2")
+implementation("io.coil-kt.coil3:coil-network-okhttp:3.0.2")
+Чтобы загрузите изображение, используйте AsyncImage composable:
Ознакомьтесь с [полной документацией Coil] здесь (https://coil-kt.github.io/coil/getting_started/).
Copyright 2024 Coil Contributors
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ https://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+
Ett bildbibliotek för Android och Compose Multiplatform. Spolen är:
Spole är en akronym för: Corutin Ibild Lloader.
Importera Compose-biblioteket och ett nätverksbibliotek:
implementering("io.coil-kt.coil3:coil-compose:3.0.2")
+implementering("io.coil-kt.coil3:coil-network-okhttp:3.0.2")
+För att ladda en bild, använd "AsyncImage" komponerbar:
Kolla in Coils fullständiga dokumentation här.
Copyright 2024 Coil Contributors
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ https://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+
Android ve Compose Multiplatform için bir resim yükleme kütüphanesi. Coil:
Coil, Coroutine Image Loader'ın kısaltmasıdır.
Compose kütüphanesini ve bir ağ kütüphanesini içe aktarın:
implementation("io.coil-kt.coil3:coil-compose:3.0.2")
+implementation("io.coil-kt.coil3:coil-network-okhttp:3.0.2")
+Bir görüntüyü yüklemek için, AsyncImage bileşenini kullanın:
Coil'in tam belgelerine buradan göz atın.
Copyright 2024 Coil Contributors
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ https://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+
适用于 Android 和 Compose Multiplatform 的图像加载库。Coil 具有以下特点：
Coil 是 Coroutine Image L**oader 的缩写。
导入 Compose 库和 网络库：
implementation("io.coil-kt.coil3:coil-compose:3.0.2")
+implementation("io.coil-kt.coil3:coil-network-okhttp:3.0.2")
+要加载图像，请使用 AsyncImage可组合：
查看 Coil 的完整文档。
Copyright 2024 Coil Contributors
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ https://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+A model equality delegate that always delegates to the model's equals and hashCode. If the model is an ImageRequest this will compare all of its properties and this may cause recompositions than necessary. Consider remembering your ImageRequests if you use this model equality delegate.
The default model equality delegate that only compares a subset of ImageRequest's properties instead of delegating to its own equals and hashCode implementations.
A model equality delegate that always delegates to the model's equals and hashCode. If the model is an ImageRequest this will compare all of its properties and this may cause recompositions than necessary. Consider remembering your ImageRequests if you use this model equality delegate.
The default model equality delegate that only compares a subset of ImageRequest's properties instead of delegating to its own equals and hashCode implementations.
Determines equality between two models.
This allows you to control when rememberAsyncImagePainter, AsyncImage, and SubcomposeAsyncImage execute a new request and recompose due to a model change.
A state transform that does not modify the state.
The latest arguments passed to AsyncImagePainter.
The request has not been started.
The current painter being drawn by AsyncImagePainter.
The current painter being drawn by AsyncImagePainter.
The request failed due to ErrorResult.throwable.
The current painter being drawn by AsyncImagePainter.
The current painter being drawn by AsyncImagePainter.
The request is in-progress.
The current painter being drawn by AsyncImagePainter.
The request was successful.
The current painter being drawn by AsyncImagePainter.
The current painter being drawn by AsyncImagePainter.
The request has not been started.
The request failed due to ErrorResult.throwable.
The request is in-progress.
The request was successful.
The current painter being drawn by AsyncImagePainter.
The current painter being drawn by AsyncImagePainter.
A Painter that that executes an ImageRequest asynchronously and renders the ImageResult.
The latest arguments passed to AsyncImagePainter.
The current state of the AsyncImagePainter.
Convenience function that creates an AsyncImagePreviewHandler that returns an Image.
Controls what AsyncImage, SubcomposeAsyncImage, and AsyncImagePainter render when LocalInspectionMode is true.
A composable that executes an ImageRequest asynchronously and renders the result.
Either an ImageRequest or the ImageRequest.data value.
Text used by accessibility services to describe what this image represents. This should always be provided unless this image is used for decorative purposes, and does not represent a meaningful action that a user can take.
The ImageLoader that will be used to execute the request.
Modifier used to adjust the layout algorithm or draw decoration content.
A Painter that is displayed while the image is loading.
A Painter that is displayed when the image request is unsuccessful.
A Painter that is displayed when the request's ImageRequest.data is null.
Called when the image request begins loading.
Called when the image request completes successfully.
Called when the image request completes unsuccessfully.
Optional alignment parameter used to place the AsyncImagePainter in the given bounds defined by the width and height.
Optional scale parameter used to determine the aspect ratio scaling to be used if the bounds are a different size from the intrinsic size of the AsyncImagePainter.
Optional opacity to be applied to the AsyncImagePainter when it is rendered onscreen.
Optional ColorFilter to apply for the AsyncImagePainter when it is rendered onscreen.
Sampling algorithm applied to a bitmap when it is scaled and drawn into the destination.
If true, clips the content to its bounds. Else, it will not be clipped.
A composable that executes an ImageRequest asynchronously and renders the result.
Either an ImageRequest or the ImageRequest.data value.
Text used by accessibility services to describe what this image represents. This should always be provided unless this image is used for decorative purposes, and does not represent a meaningful action that a user can take.
The ImageLoader that will be used to execute the request.
Modifier used to adjust the layout algorithm or draw decoration content.
A callback to transform a new State before it's applied to the AsyncImagePainter. Typically this is used to modify the state's Painter.
Called when the state of this painter changes.
Optional alignment parameter used to place the AsyncImagePainter in the given bounds defined by the width and height.
Optional scale parameter used to determine the aspect ratio scaling to be used if the bounds are a different size from the intrinsic size of the AsyncImagePainter.
Optional opacity to be applied to the AsyncImagePainter when it is rendered onscreen.
Optional ColorFilter to apply for the AsyncImagePainter when it is rendered onscreen.
Sampling algorithm applied to a bitmap when it is scaled and drawn into the destination.
If true, clips the content to its bounds. Else, it will not be clipped.
A SizeResolver that computes the size from the constraints passed during the layout phase or from setConstraints.
A special SizeResolver that waits until AsyncImagePainter.onDraw to return the DrawScope's size.
A composable that draws SubcomposeAsyncImage's content with SubcomposeAsyncImageScope's properties.
The alpha for SubcomposeAsyncImageContent.
If true, applies clipToBounds to SubcomposeAsyncImageContent.
The color filter for SubcomposeAsyncImageContent.
The content description for SubcomposeAsyncImageContent.
The content scale for SubcomposeAsyncImageContent.
A scope for the children of SubcomposeAsyncImage.
The alpha for SubcomposeAsyncImageContent.
If true, applies clipToBounds to SubcomposeAsyncImageContent.
The color filter for SubcomposeAsyncImageContent.
The content description for SubcomposeAsyncImageContent.
The content scale for SubcomposeAsyncImageContent.
The painter that is drawn by SubcomposeAsyncImageContent.
A composable that draws SubcomposeAsyncImage's content with SubcomposeAsyncImageScope's properties.
The painter that is drawn by SubcomposeAsyncImageContent.
A composable that executes an ImageRequest asynchronously and renders the result.
NOTE: This API uses subcomposition, which is slow. Avoid using this composable in places that need high performance (e.g. LazyRow/LazyColumn).
Either an ImageRequest or the ImageRequest.data value.
Text used by accessibility services to describe what this image represents. This should always be provided unless this image is used for decorative purposes, and does not represent a meaningful action that a user can take.
The ImageLoader that will be used to execute the request.
Modifier used to adjust the layout algorithm or draw decoration content.
An optional callback to overwrite what's drawn while the image request is loading.
An optional callback to overwrite what's drawn when the image request succeeds.
An optional callback to overwrite what's drawn when the image request fails.
Called when the image request begins loading.
Called when the image request completes successfully.
Called when the image request completes unsuccessfully.
Optional alignment parameter used to place the AsyncImagePainter in the given bounds defined by the width and height.
Optional scale parameter used to determine the aspect ratio scaling to be used if the bounds are a different size from the intrinsic size of the AsyncImagePainter.
Optional opacity to be applied to the AsyncImagePainter when it is rendered onscreen.
Optional ColorFilter to apply for the AsyncImagePainter when it is rendered onscreen.
Sampling algorithm applied to a bitmap when it is scaled and drawn into the destination.
If true, clips the content to its bounds. Else, it will not be clipped.
A composable that executes an ImageRequest asynchronously and renders the result.
NOTE: This API uses subcomposition, which is slow. Avoid using this composable in places that need high performance (e.g. LazyRow/LazyColumn).
Either an ImageRequest or the ImageRequest.data value.
Text used by accessibility services to describe what this image represents. This should always be provided unless this image is used for decorative purposes, and does not represent a meaningful action that a user can take.
The ImageLoader that will be used to execute the request.
Modifier used to adjust the layout algorithm or draw decoration content.
A callback to transform a new State before it's applied to the AsyncImagePainter. Typically this is used to modify the state's Painter.
Called when the state of this painter changes.
Optional alignment parameter used to place the AsyncImagePainter in the given bounds defined by the width and height.
Optional scale parameter used to determine the aspect ratio scaling to be used if the bounds are a different size from the intrinsic size of the AsyncImagePainter.
Optional opacity to be applied to the AsyncImagePainter when it is rendered onscreen.
Optional ColorFilter to apply for the AsyncImagePainter when it is rendered onscreen.
Sampling algorithm applied to a bitmap when it is scaled and drawn into the destination.
If true, clips the content to its bounds. Else, it will not be clipped.
A callback to draw the content inside a SubcomposeAsyncImageScope.
Convert this Image into a Painter using Compose primitives if possible.
Determines equality between two models.
A Painter that that executes an ImageRequest asynchronously and renders the ImageResult.
Controls what AsyncImage, SubcomposeAsyncImage, and AsyncImagePainter render when LocalInspectionMode is true.
A SizeResolver that computes the size from the constraints passed during the layout phase or from setConstraints.
A special SizeResolver that waits until AsyncImagePainter.onDraw to return the DrawScope's size.
A scope for the children of SubcomposeAsyncImage.
A composable that executes an ImageRequest asynchronously and renders the result.
Convenience function that creates an AsyncImagePreviewHandler that returns an Image.
Return an AsyncImagePainter that executes an ImageRequest asynchronously and renders the result.
Create a ConstraintsSizeResolver and remember it.
Create a DrawScopeSizeResolver and remember it.
A composable that executes an ImageRequest asynchronously and renders the result.
A composable that draws SubcomposeAsyncImage's content with SubcomposeAsyncImageScope's properties.
Return an AsyncImagePainter that executes an ImageRequest asynchronously and renders the result.
** This is a lower-level API than AsyncImage and may not work as expected in all situations. **
Either an ImageRequest or the ImageRequest.data value.
The ImageLoader that will be used to execute the request.
A Painter that is displayed while the image is loading.
A Painter that is displayed when the image request is unsuccessful.
A Painter that is displayed when the request's ImageRequest.data is null.
Called when the image request begins loading.
Called when the image request completes successfully.
Called when the image request completes unsuccessfully.
Sampling algorithm applied to a bitmap when it is scaled and drawn into the destination.
Return an AsyncImagePainter that executes an ImageRequest asynchronously and renders the result.
** This is a lower-level API than AsyncImage and may not work as expected in all situations. **
Either an ImageRequest or the ImageRequest.data value.
The ImageLoader that will be used to execute the request.
A callback to transform a new State before it's applied to the AsyncImagePainter. Typically this is used to overwrite the state's Painter.
Called when the state of this painter changes.
Sampling algorithm applied to a bitmap when it is scaled and drawn into the destination.
Create a ConstraintsSizeResolver and remember it.
Create a DrawScopeSizeResolver and remember it.
A composable that executes an ImageRequest asynchronously and renders the result.
Either an ImageRequest or the ImageRequest.data value.
Text used by accessibility services to describe what this image represents. This should always be provided unless this image is used for decorative purposes, and does not represent a meaningful action that a user can take.
Modifier used to adjust the layout algorithm or draw decoration content.
A Painter that is displayed while the image is loading.
A Painter that is displayed when the image request is unsuccessful.
A Painter that is displayed when the request's ImageRequest.data is null.
Called when the image request begins loading.
Called when the image request completes successfully.
Called when the image request completes unsuccessfully.
Optional alignment parameter used to place the AsyncImagePainter in the given bounds defined by the width and height.
Optional scale parameter used to determine the aspect ratio scaling to be used if the bounds are a different size from the intrinsic size of the AsyncImagePainter.
Optional opacity to be applied to the AsyncImagePainter when it is rendered onscreen.
Optional ColorFilter to apply for the AsyncImagePainter when it is rendered onscreen.
Sampling algorithm applied to a bitmap when it is scaled and drawn into the destination.
If true, clips the content to its bounds. Else, it will not be clipped.
A composable that executes an ImageRequest asynchronously and renders the result.
Either an ImageRequest or the ImageRequest.data value.
Text used by accessibility services to describe what this image represents. This should always be provided unless this image is used for decorative purposes, and does not represent a meaningful action that a user can take.
Modifier used to adjust the layout algorithm or draw decoration content.
A callback to transform a new State before it's applied to the AsyncImagePainter. Typically this is used to modify the state's Painter.
Called when the state of this painter changes.
Optional alignment parameter used to place the AsyncImagePainter in the given bounds defined by the width and height.
Optional scale parameter used to determine the aspect ratio scaling to be used if the bounds are a different size from the intrinsic size of the AsyncImagePainter.
Optional opacity to be applied to the AsyncImagePainter when it is rendered onscreen.
Optional ColorFilter to apply for the AsyncImagePainter when it is rendered onscreen.
Sampling algorithm applied to a bitmap when it is scaled and drawn into the destination.
If true, clips the content to its bounds. Else, it will not be clipped.
A composable that executes an ImageRequest asynchronously and renders the result.
NOTE: This API uses subcomposition, which is slow. Avoid using this composable in places that need high performance (e.g. LazyRow/LazyColumn).
Either an ImageRequest or the ImageRequest.data value.
Text used by accessibility services to describe what this image represents. This should always be provided unless this image is used for decorative purposes, and does not represent a meaningful action that a user can take.
Modifier used to adjust the layout algorithm or draw decoration content.
An optional callback to overwrite what's drawn while the image request is loading.
An optional callback to overwrite what's drawn when the image request succeeds.
An optional callback to overwrite what's drawn when the image request fails.
Called when the image request begins loading.
Called when the image request completes successfully.
Called when the image request completes unsuccessfully.
Optional alignment parameter used to place the AsyncImagePainter in the given bounds defined by the width and height.
Optional scale parameter used to determine the aspect ratio scaling to be used if the bounds are a different size from the intrinsic size of the AsyncImagePainter.
Optional opacity to be applied to the AsyncImagePainter when it is rendered onscreen.
Optional ColorFilter to apply for the AsyncImagePainter when it is rendered onscreen.
Sampling algorithm applied to a bitmap when it is scaled and drawn into the destination.
If true, clips the content to its bounds. Else, it will not be clipped.
A composable that executes an ImageRequest asynchronously and renders the result.
NOTE: This API uses subcomposition, which is slow. Avoid using this composable in places that need high performance (e.g. LazyRow/LazyColumn).
Either an ImageRequest or the ImageRequest.data value.
Text used by accessibility services to describe what this image represents. This should always be provided unless this image is used for decorative purposes, and does not represent a meaningful action that a user can take.
Modifier used to adjust the layout algorithm or draw decoration content.
A callback to transform a new State before it's applied to the AsyncImagePainter. Typically this is used to modify the state's Painter.
Called when the state of this painter changes.
Optional alignment parameter used to place the AsyncImagePainter in the given bounds defined by the width and height.
Optional scale parameter used to determine the aspect ratio scaling to be used if the bounds are a different size from the intrinsic size of the AsyncImagePainter.
Optional opacity to be applied to the AsyncImagePainter when it is rendered onscreen.
Optional ColorFilter to apply for the AsyncImagePainter when it is rendered onscreen.
Sampling algorithm applied to a bitmap when it is scaled and drawn into the destination.
If true, clips the content to its bounds. Else, it will not be clipped.
A callback to draw the content inside a SubcomposeAsyncImageScope.
A composable that executes an ImageRequest asynchronously and renders the result.
Return an AsyncImagePainter that executes an ImageRequest asynchronously and renders the result.
Alias for SingletonImageLoader.setSafe that's optimized for calling from Compose.
A composable that executes an ImageRequest asynchronously and renders the result.
Return an AsyncImagePainter that executes an ImageRequest asynchronously and renders the result.
** This is a lower-level API than AsyncImage and may not work as expected in all situations. **
Either an ImageRequest or the ImageRequest.data value.
A Painter that is displayed while the image is loading.
A Painter that is displayed when the image request is unsuccessful.
A Painter that is displayed when the request's ImageRequest.data is null.
Called when the image request begins loading.
Called when the image request completes successfully.
Called when the image request completes unsuccessfully.
Sampling algorithm applied to a bitmap when it is scaled and drawn into the destination.
Return an AsyncImagePainter that executes an ImageRequest asynchronously and renders the result.
** This is a lower-level API than AsyncImage and may not work as expected in all situations. **
Either an ImageRequest or the ImageRequest.data value.
A callback to transform a new State before it's applied to the AsyncImagePainter. Typically this is used to overwrite the state's Painter.
Called when the state of this painter changes.
Sampling algorithm applied to a bitmap when it is scaled and drawn into the destination.
Alias for SingletonImageLoader.setSafe that's optimized for calling from Compose.
Marks declarations that should be used carefully.
Targets marked by this annotation are often provided for usage in tests and should be avoided in production code.
Marks declarations that are still experimental.
Targets marked by this annotation may contain breaking changes in the future as their design is still incubating.
Marks declarations that are internal in Coil's API.
Targets marked by this annotation should not be used outside of Coil because their signatures and semantics will change between future releases without any warnings and without providing any migration aids.
Marks declarations that should be used carefully.
Marks declarations that are still experimental.
Marks declarations that are internal in Coil's API.
Metadata containing the filePath of an Android asset.
The base Decoder that uses BitmapFactory to decode a given ImageSource.
Return a Decoder that can decode result or 'null' if this factory cannot create a decoder for the source.
Implementations must not consume result's ImageSource, as this can cause calls to subsequent decoders to fail. ImageSources should only be consumed in decode.
Prefer using BufferedSource.peek, BufferedSource.rangeEquals, or other non-consuming methods to check for the presence of header bytes or other markers. Implementations can also rely on SourceFetchResult.mimeType, however it is not guaranteed to be accurate (e.g. a file that ends with .png, but is encoded as a .jpg).
The result from the Fetcher.
A set of configuration options for this request.
The ImageLoader that's executing this request.
Decode the SourceFetchResult provided by Factory.create or return 'null' to delegate to the next Factory in the component registry.
A Decoder that ignores the SourceFetchResult and always returns the Image returned by imageFactory.
This is useful for skipping the decoding step, for instance when you only want to preload to disk and do not want to decode the image into memory.
Decode the SourceFetchResult provided by Factory.create or return 'null' to delegate to the next Factory in the component registry.
Metadata containing the underlying ByteBuffer of the ImageSource.
Metadata containing the uri and associated assetFileDescriptor of a content URI.
Represents a disk-based data source (e.g. DrawableRes, File).
Represents an in-memory data source (e.g. Bitmap, ByteBuffer).
Represents an ImageLoader's memory cache.
This is a special data source as it means the request was short circuited and skipped the full image pipeline.
Represents a network-based data source (e.g. Url).
Returns a representation of an immutable list of all enum entries, in the order they're declared.
This method may be used to iterate over the enum entries.
Represents the source that an image was loaded from.
Represents an ImageLoader's memory cache.
Returns the enum constant of this type with the specified name. The string must match exactly an identifier used to declare an enum constant in this type. (Extraneous whitespace characters are not permitted.)
Returns an array containing the constants of this enum type, in the order they're declared.
Returns the enum constant of this type with the specified name. The string must match exactly an identifier used to declare an enum constant in this type. (Extraneous whitespace characters are not permitted.)
if this enum type has no constant with the specified name
Returns an array containing the constants of this enum type, in the order they're declared.
This method may be used to iterate over the constants.
The result of Decoder.decode.
The decoded Image.
'true' if image is sampled (i.e. loaded into memory at less than its original size).
Parse targetSize and return the destination dimensions that the source image should be scaled into. The returned dimensions can be passed to computeSizeMultiplier to get the final size multiplier.
Calculate the percentage to multiply the source dimensions by to fit/fill the destination dimensions while preserving aspect ratio.
A collection of useful utility methods for decoding images.
Parse targetSize and return the destination dimensions that the source image should be scaled into. The returned dimensions can be passed to computeSizeMultiplier to get the final size multiplier.
Calculate the percentage to multiply the source dimensions by to fit/fill the destination dimensions while preserving aspect ratio.
Return a Decoder that can decode result or 'null' if this factory cannot create a decoder for the source.
Implementations must not consume result's ImageSource, as this can cause calls to subsequent decoders to fail. ImageSources should only be consumed in decode.
Prefer using BufferedSource.peek, BufferedSource.rangeEquals, or other non-consuming methods to check for the presence of header bytes or other markers. Implementations can also rely on SourceFetchResult.mimeType, however it is not guaranteed to be accurate (e.g. a file that ends with .png, but is encoded as a .jpg).
The result from the Fetcher.
A set of configuration options for this request.
The ImageLoader that's executing this request.
Decode the SourceFetchResult provided by Factory.create or return 'null' to delegate to the next Factory in the component registry.
A Decoder converts a SourceFetchResult into a DecodeResult.
Use this interface to add support for custom file formats (e.g. GIF, SVG, TIFF, etc.).
Decode the SourceFetchResult provided by Factory.create or return 'null' to delegate to the next Factory in the component registry.
Ignore the EXIF orientation flag.
Respect the EXIF orientation flag for all supported formats.
NOTE: This strategy can potentially cause out of memory errors as certain image formats (e.g. PNG) will be buffered entirely into memory while being decoded.
Respect the EXIF orientation flag only for image formats that won't negatively affect performance.
This strategy respects the EXIF orientation flag for the following MIME types:
image/jpeg
image/webp
image/heic
image/heif
This is the default value for ImageLoader.Builder.bitmapFactoryExifOrientationStrategy.
Ignore the EXIF orientation flag.
Respect the EXIF orientation flag for all supported formats.
Respect the EXIF orientation flag only for image formats that won't negatively affect performance.
Return true if the image should be normalized according to its EXIF data.
NOTE: It is an error to consume source. Use BufferedSource.peek, BufferedSource.rangeEquals, or other non-consuming methods to read the source.
Create a new ImageSource backed by a Path.
The file to read from.
The file system which contains file.
An optional cache key for the file in the disk cache.
An optional closeable reference that will be closed when the image source is closed.
Metadata for this image source.
Create a new ImageSource backed by a BufferedSource.
The buffered source to read from.
The file system which will be used to create a temporary file if necessary.
Metadata for this image source.
A marker class for metadata for an ImageSource.
Heavily prefer using source or file to decode the image's data instead of relying on information provided in the metadata. It's the responsibility of a Fetcher to create a BufferedSource or Path that can be easily read irrespective of where the image data is located. A Decoder should be as decoupled as possible from where the image is being fetched from.
This method is provided as a way to pass information to decoders that don't support decoding a BufferedSource and want to avoid creating a temporary file (e.g. ImageDecoder, MediaMetadataRetriever).
Return a Path that resolves to a file containing this ImageSource's data if one has already been created. Else, return 'null'.
The FileSystem which contains the file.
Return a Path that resolves to a file containing this ImageSource's data.
If this image source is backed by a BufferedSource, a temporary file containing this ImageSource's data will be created.
Provides access to the image data to be decoded.
A marker class for metadata for an ImageSource.
The FileSystem which contains the file.
Return the Metadata for this ImageSource.
Return a Path that resolves to a file containing this ImageSource's data.
Return a Path that resolves to a file containing this ImageSource's data if one has already been created. Else, return 'null'.
Return a BufferedSource to read this ImageSource.
Return the BufferedSource to read this ImageSource if one has already been created. Else, return 'null'.
Return the Metadata for this ImageSource.
Return the BufferedSource to read this ImageSource if one has already been created. Else, return 'null'.
Return a BufferedSource to read this ImageSource.
Metadata containing the packageName, resId, and density of an Android resource.
Return a Decoder that can decode result or 'null' if this factory cannot create a decoder for the source.
Implementations must not consume result's ImageSource, as this can cause calls to subsequent decoders to fail. ImageSources should only be consumed in decode.
Prefer using BufferedSource.peek, BufferedSource.rangeEquals, or other non-consuming methods to check for the presence of header bytes or other markers. Implementations can also rely on SourceFetchResult.mimeType, however it is not guaranteed to be accurate (e.g. a file that ends with .png, but is encoded as a .jpg).
The result from the Fetcher.
A set of configuration options for this request.
The ImageLoader that's executing this request.
Decode the SourceFetchResult provided by Factory.create or return 'null' to delegate to the next Factory in the component registry.
Decode the SourceFetchResult provided by Factory.create or return 'null' to delegate to the next Factory in the component registry.
Metadata containing the filePath of an Android asset.
The base Decoder that uses BitmapFactory to decode a given ImageSource.
A Decoder that ignores the SourceFetchResult and always returns the Image returned by imageFactory.
Metadata containing the underlying ByteBuffer of the ImageSource.
Metadata containing the uri and associated assetFileDescriptor of a content URI.
Represents the source that an image was loaded from.
A Decoder converts a SourceFetchResult into a DecodeResult.
The result of Decoder.decode.
A collection of useful utility methods for decoding images.
Specifies the strategy for handling the EXIF orientation flag.
Provides access to the image data to be decoded.
Metadata containing the packageName, resId, and density of an Android resource.
Create a new ImageSource backed by a BufferedSource.
Create a new ImageSource backed by a Path.
Set the CoroutineDispatcher that cache size trim operations will be executed on.
Set the fileSystem where the cache stores its data.
Set the CoroutineDispatcher that cache size trim operations will be executed on.
Set the directory where the cache stores its data.
Set the directory where the cache stores its data.
Set the fileSystem where the cache stores its data.
Set the maximum size of the disk cache in bytes. This is ignored if maxSizeBytes is set.
Set the maximum size of the disk cache in bytes.
Set the maximum size of the disk cache as a percentage of the device's free disk space.
Set the minimum size of the disk cache in bytes. This is ignored if maxSizeBytes is set.
Set the maximum size of the disk cache in bytes.
Set the maximum size of the disk cache as a percentage of the device's free disk space.
Set the maximum size of the disk cache in bytes. This is ignored if maxSizeBytes is set.
Set the minimum size of the disk cache in bytes. This is ignored if maxSizeBytes is set.
Abort the edit. Any written data will be discarded.
Commit the write and call openSnapshot for this entry atomically.
Commit the edit so the changes are visible to readers.
Edits the values for an entry.
Calling metadata or data marks that file as dirty so it will be persisted to disk if this editor is committed.
IMPORTANT: You must only read or modify the contents of metadata or data. Renaming, locking, or other mutating file operations can corrupt the disk cache.
Commit the write and call openSnapshot for this entry atomically.
Close the snapshot and call openEditor for this entry atomically.
Close the snapshot to allow editing.
A snapshot of the values for an entry.
IMPORTANT: You must only read metadata or data. Mutating either file can corrupt the disk cache. To modify the contents of those files, use openEditor.
Close the snapshot and call openEditor for this entry atomically.
Delete all entries in the disk cache.
The file system that contains the cache's files.
An LRU cache of files.
Write to the entry associated with key.
IMPORTANT: You must call one of Editor.commit, Editor.commitAndOpenSnapshot, or Editor.abort to complete the edit. An open editor prevents opening a new Snapshot, opening a new Editor, or deleting the entry on disk.
Read the entry associated with key.
IMPORTANT: You must call either Snapshot.close or Snapshot.closeAndOpenEditor when finished reading the snapshot. An open snapshot prevents opening a new Editor or deleting the entry on disk.
Close any open snapshots, abort all in-progress edits, and close any open system resources.
Set the directory where the cache stores its data.
IMPORTANT: It is an error to have two DiskCache instances active in the same directory at the same time as this can corrupt the disk cache.
Set the directory where the cache stores its data.
Return a Fetcher that can fetch data or 'null' if this factory cannot create a fetcher for the data.
The data to fetch.
A set of configuration options for this request.
The ImageLoader that's executing this request.
Fetch the data provided by Factory.create or return 'null' to delegate to the next Factory in the component registry.
A Fetcher translates data (e.g. URI, file, etc.) into a FetchResult.
To accomplish this, fetchers fit into one of two types:
Uses the data as a key to fetch bytes from a remote source (e.g. network, disk) and exposes it as an ImageSource.
Reads the data directly and translates it into an Image.
Fetch the data provided by Factory.create or return 'null' to delegate to the next Factory in the component registry.
An Image result. Return this from a Fetcher if its data cannot be converted into an ImageSource.
The ImageSource to read from.
An optional MIME type for the source.
The source that source was fetched from.
An ImageSource result, which will be consumed by a relevant Decoder.
The ImageSource to read from.
An optional MIME type for the source.
The source that source was fetched from.
A Fetcher translates data (e.g. URI, file, etc.) into a FetchResult.
The result of Fetcher.fetch.
An Image result. Return this from a Fetcher if its data cannot be converted into an ImageSource.
An ImageSource result, which will be consumed by a relevant Decoder.
Continue executing the chain.
Observe, transform, short circuit, or retry requests to an ImageLoader's image engine.
Observe, transform, short circuit, or retry requests to an ImageLoader's image engine.
Create a new MemoryCache instance.
Create a new MemoryCache instance.
Set the maximum size of the memory cache in bytes.
Set the maximum size of the memory cache as a percentage of this application's available memory.
Enables/disables strong reference tracking of values added to this memory cache.
Enables/disables weak reference tracking of values added to this memory cache. Weak references do not contribute to the current size of the memory cache. This ensures that if a Value hasn't been garbage collected yet it will be returned from the memory cache.
Set the maximum size of the memory cache in bytes.
Set the maximum size of the memory cache as a percentage of this application's available memory.
Enables/disables strong reference tracking of values added to this memory cache.
Enables/disables weak reference tracking of values added to this memory cache. Weak references do not contribute to the current size of the memory cache. This ensures that if a Value hasn't been garbage collected yet it will be returned from the memory cache.
The cache key for a Value in the memory cache.
Remove all values from the memory cache.
An LRU cache of Images.
Remove the eldest entries until the cache's size is at or below size.
The keys present in the cache.
Remove the eldest entries until the cache's size is at or below size.
An LRU cache of Images.
Returns a representation of an immutable list of all enum entries, in the order they're declared.
This method may be used to iterate over the enum entries.
Represents the read/write policy for a cache source.
Returns the enum constant of this type with the specified name. The string must match exactly an identifier used to declare an enum constant in this type. (Extraneous whitespace characters are not permitted.)
Returns an array containing the constants of this enum type, in the order they're declared.
Returns the enum constant of this type with the specified name. The string must match exactly an identifier used to declare an enum constant in this type. (Extraneous whitespace characters are not permitted.)
if this enum type has no constant with the specified name
Returns an array containing the constants of this enum type, in the order they're declared.
This method may be used to iterate over the constants.
Cancels this disposable's work and releases any held resources.
Represents the work of an ImageRequest that has been executed by an ImageLoader.
Returns 'true' if this disposable's work is complete or cancelling.
The most recent image request job. This field is not immutable and can change if the request is replayed.
Indicates that an error occurred while executing the request.
The request that was executed to create this result.
Create a new ImageRequest.
Set the data to load.
Use factory to handle decoding any image data.
If this is null or is not set the ImageLoader will find an applicable decoder in its ComponentRegistry.
Set the defaults for any unset request values.
Set the disk cache key for this request.
If this is null or is not set, the ImageLoader will compute a disk cache key.
Enable/disable reading/writing from/to the disk cache.
Set the error image to use if the request fails.
Set the fallback image to use if data is null.
Use factory to handle fetching any image data.
If this is null or is not set the ImageLoader will find an applicable fetcher in its ComponentRegistry.
The FileSystem that will be used to perform any disk read/write operations.
Enables adding a file's last modified timestamp to the memory cache key when loading an image from a file.
Create a new ImageRequest.
Enable a crossfade animation when a request completes successfully.
Enable a crossfade animation when a request completes successfully.
Set the data to load.
Use factory to handle decoding any image data.
Set the defaults for any unset request values.
Set the disk cache key for this request.
Enable/disable reading/writing from/to the disk cache.
Set the error image to use if the request fails.
Set the fallback image to use if data is null.
Use factory to handle fetching any image data.
The FileSystem that will be used to perform any disk read/write operations.
Set the Listener.
Convenience function to create and set the Listener.
Set the maximum width and height for a bitmap.
Set the memory cache key for this request.
Set extra values to be added to this image request's memory cache key.
Set extra values to be added to this image request's memory cache key.
Enable/disable reading/writing from/to the memory cache.
Enable/disable reading from the network.
Set the placeholder image to use when the request starts.
Set the precision for the size of the loaded image.
Set the scaling algorithm that will be used to fit/fill the image into the size provided by sizeResolver.
Set the requested width/height.
Set the SizeResolver to resolve the requested width/height.
Convenience function to create and set the Listener.
Set the Listener.
Set extra values to be added to this image request's memory cache key.
Set extra values to be added to this image request's memory cache key.
Set the memory cache key for this request.
If this is null or is not set, the ImageLoader will compute a memory cache key.
Enable/disable reading/writing from/to the memory cache.
Enable/disable reading from the network.
NOTE: Disabling writes has no effect.
Set the memory cache key whose value will be used as the placeholder drawable.
If there is no value in the memory cache for key, fall back to placeholder.
Set the memory cache key whose value will be used as the placeholder image.
If there is no value in the memory cache for key, fall back to placeholder.
Set the placeholder image to use when the request starts.
Set the precision for the size of the loaded image.
NOTE: If size is Size.ORIGINAL, the returned image's size will always be equal to or greater than the image's original size.
Set the scaling algorithm that will be used to fit/fill the image into the size provided by sizeResolver.
A set of default options that are used to fill in unset ImageRequest values.
Tracks which values have been set (instead of computed automatically using a default) when building an ImageRequest.
Called if the request is cancelled.
Called if an error occurs while executing the request.
Called immediately after Target.onStart.
Called if the request completes successfully.
Called if the request is cancelled.
Called if an error occurs while executing the request.
Called immediately after Target.onStart.
Called if the request completes successfully.
The defaults used to fill unset values.
The raw values set on Builder.
An immutable value object that represents a request for an image.
A set of default options that are used to fill in unset ImageRequest values.
Tracks which values have been set (instead of computed automatically using a default) when building an ImageRequest.
A set of callbacks for an ImageRequest.
The defaults used to fill unset values.
The raw values set on Builder.
Create and return a new placeholder image.
Exception thrown when an ImageRequest with empty/null data is executed by an ImageLoader.
The value for ImageRequest.data if the request's data was not set or was set to null.
The PlatformContext used to execute this request.
The cache key to use when persisting images to the disk cache or 'null' if the component can compute its own.
Determines if this request is allowed to read/write from/to disk.
The FileSystem that will be used to perform any disk read/write operations.
A set of configuration options for fetching and decoding an image.
Fetchers and Decoders should respect these options as best as possible.
The PlatformContext used to execute this request.
The cache key to use when persisting images to the disk cache or 'null' if the component can compute its own.
Determines if this request is allowed to read/write from/to disk.
The FileSystem that will be used to perform any disk read/write operations.
Determines if this request is allowed to read/write from/to memory.
Determines if this request is allowed to read from the network.
Precision.EXACT if the output image needs to fit/fill the target's dimensions exactly.
Determines if this request is allowed to read/write from/to memory.
Determines if this request is allowed to read from the network.
Precision.EXACT if the output image needs to fit/fill the target's dimensions exactly.
For instance, if Precision.INEXACT BitmapFactoryDecoder will not decode an image at a larger size than its source dimensions as an optimization.
The data source that the image was loaded from.
The cache key for the image in the disk cache. It is 'null' if the image was not written to the disk cache.
Indicates that the request completed successfully.
The data source that the image was loaded from.
The cache key for the image in the disk cache. It is 'null' if the image was not written to the disk cache.
'true' if ImageRequest.placeholderMemoryCacheKey was present in the memory cache.
The cache key for the image in the memory cache. It is 'null' if the image was not written to the memory cache.
The request that was executed to create this result.
'true' if ImageRequest.placeholderMemoryCacheKey was present in the memory cache.
The cache key for the image in the memory cache. It is 'null' if the image was not written to the memory cache.
The request that was executed to create this result.
Enables adding a file's last modified timestamp to the memory cache key when loading an image from a file.
This allows subsequent requests that load the same file to miss the memory cache if the file has been updated. However, if the memory cache check occurs on the main thread (see ImageLoader.Builder.interceptorCoroutineContext) calling this will cause a strict mode violation.
Allow converting the result drawable to a bitmap to apply any transformations.
If false and the result drawable is not a BitmapDrawable any transformations will be ignored.
Allow the use of Bitmap.Config.HARDWARE.
If false, any use of Bitmap.Config.HARDWARE will be treated as Bitmap.Config.ARGB_8888.
NOTE: Setting this to false this will reduce performance on API 26 and above. Only disable this if necessary.
Allow automatically using Bitmap.Config.RGB_565 when an image is guaranteed to not have alpha.
This will reduce the visual quality of the image, but will also reduce memory usage.
Prefer only enabling this for low memory and resource constrained devices.
Set the preferred Bitmap.Config.
This is not guaranteed and a different bitmap config may be used in some situations.
Set the preferred ColorSpace.
This is not guaranteed and a different color space may be used in some situations.
Enable a crossfade animation when a request completes successfully.
Enable a crossfade animation when a request completes successfully.
Represents the read/write policy for a cache source.
Represents the work of an ImageRequest that has been executed by an ImageLoader.
Indicates that an error occurred while executing the request.
An immutable value object that represents a request for an image.
Represents the result of an executed ImageRequest.
The value for ImageRequest.data if the request's data was not set or was set to null.
Exception thrown when an ImageRequest with empty/null data is executed by an ImageLoader.
A set of configuration options for fetching and decoding an image.
Indicates that the request completed successfully.
Enables adding a file's last modified timestamp to the memory cache key when loading an image from a file.
Allow converting the result drawable to a bitmap to apply any transformations.
Allow the use of Bitmap.Config.HARDWARE.
Allow automatically using Bitmap.Config.RGB_565 when an image is guaranteed to not have alpha.
Set the preferred Bitmap.Config.
Set the preferred ColorSpace.
Enable a crossfade animation when a request completes successfully.
Enable a crossfade animation when a request completes successfully.
Set the maximum width and height for a bitmap.
Enable/disable pre-multiplication of the color (RGB) channels of the decoded image by the alpha channel.
Set Transformations to be applied to the output image.
Set the Transition.Factory that's started when an image result is applied to a target.
Set the Lifecycle for this request.
Requests are queued while the lifecycle is not at least Lifecycle.State.STARTED. Requests are cancelled when the lifecycle reaches Lifecycle.State.DESTROYED.
If this is null or is not set the ImageLoader will attempt to find the lifecycle for this request through ImageRequest.context.
Set the maximum width and height for a bitmap.
This value is cooperative and Fetchers and Decoders should respect the width and height values provided by maxBitmapSize and not allocate a bitmap with a width/height larger than those dimensions.
To allow a bitmap's size to be unrestricted pass Dimension.Undefined for size's width and/or height.
Enable/disable pre-multiplication of the color (RGB) channels of the decoded image by the alpha channel.
The default behavior is to enable pre-multiplication but in some environments it can be necessary to disable this feature to leave the source pixels unmodified.
Set Transformations to be applied to the output image.
Set the Transition.Factory that's started when an image result is applied to a target.
Create a Dimension.Pixels value with px number of pixels.
Represents an undefined pixel value.
E.g. given Size(400, Dimension.Undefined), the image should be loaded to fit/fill a width of 400 pixels irrespective of the image's height.
This value is typically used in cases where a dimension is unbounded (e.g. ViewGroup.LayoutParams.WRAP_CONTENT, Constraints.Infinity).
NOTE: If either dimension is Undefined, Options.scale is always Scale.FIT.
Require that the loaded image's dimensions match the request's size and scale exactly.
Allow the size of the loaded image to not match the requested dimensions exactly. This enables several optimizations:
If the requested dimensions are larger than the original size of the image, it will be loaded using its original dimensions. This uses less memory.
If the image is present in the memory cache at a larger size than the request's dimensions, it will be returned. This increases the hit rate of the memory cache.
Prefer this option if your target can scale the loaded image (e.g. ImageView, AsyncImage).
Returns a representation of an immutable list of all enum entries, in the order they're declared.
This method may be used to iterate over the enum entries.
Represents the required precision for the size of an image in an image request.
Returns the enum constant of this type with the specified name. The string must match exactly an identifier used to declare an enum constant in this type. (Extraneous whitespace characters are not permitted.)
if this enum type has no constant with the specified name
A Drawable that centers and scales its child to fill its bounds.
This allows drawables that only draw within their intrinsic dimensions to fill their entire bounds.
Fill the image in the view such that both dimensions (width and height) of the image will be equal to or larger than the corresponding dimension of the view.
Returns a representation of an immutable list of all enum entries, in the order they're declared.
This method may be used to iterate over the enum entries.
An ImageRequest's scale determines how the source image is scaled to fit into the Size returned by ImageRequest.sizeResolver.
Conceptually, you can think of this as ImageView.ScaleType without any knowledge of an image's gravity in the view.
Returns the enum constant of this type with the specified name. The string must match exactly an identifier used to declare an enum constant in this type. (Extraneous whitespace characters are not permitted.)
if this enum type has no constant with the specified name
Create a SizeResolver with a fixed size.
An interface for measuring the target size for an image request.
Return the Size that the image should be loaded at.
Represents the target size of an image request.
Each Size is composed of two Dimensions, width and height. Each dimension determines by how much the source image should be scaled. A Dimension can either be a fixed pixel value or Dimension.Undefined. Examples:
Given Size(400, 600), the image should be loaded to fit/fill a width of 400 pixels and a height of 600 pixels.
Given Size(400, Dimension.Undefined), the image should be loaded to fit/fill a width of 400 pixels.
Given Size(Dimension.Undefined, Dimension.Undefined), the image should not be scaled to fit/fill either width or height. i.e. it will be loaded at its original width/height.
Return true if this size is equal to Size.ORIGINAL. Else, return false.
Create a ViewSizeResolver using the default View measurement implementation.
The view to measure.
If true, the view's padding will be subtracted from its size.
If true, the view's padding will be subtracted from its size.
An ImageRequest's scale determines how the source image is scaled to fit into the Size returned by ImageRequest.sizeResolver.
An interface for measuring the target size for an image request.
A SizeResolver that measures the size of a View.
Return true if this size is equal to Size.ORIGINAL. Else, return false.
Create a Dimension.Pixels value with px number of pixels.
Create a SizeResolver with a fixed size.
Create a ViewSizeResolver using the default View measurement implementation.
Return true if this size is equal to Size.ORIGINAL. Else, return false.
An opinionated ViewTarget that simplifies updating the Drawable attached to a View and supports automatically starting and stopping animated Drawables.
If you need custom behaviour that this class doesn't support it's recommended to implement ViewTarget directly.
A callback that accepts an image.
A Target with an associated View. Prefer this to Target if the given drawables will only be used by view.
Optionally, ViewTargets can implement LifecycleObserver. They are automatically registered when the request starts and unregistered when the request completes.
An opinionated ViewTarget that simplifies updating the Drawable attached to a View and supports automatically starting and stopping animated Drawables.
A Transformation that crops an image using a centered circle as the mask.
If you're using Compose, use Modifier.clip(CircleShape) instead of this transformation as it's more efficient.
The radius for the top left corner.
The radius for the top right corner.
The radius for the bottom left corner.
The radius for the bottom right corner.
A Transformation that crops the image to fit the target's dimensions and rounds the corners of the image.
If you're using Compose, use Modifier.clip(RoundedCornerShape(radius)) instead of this transformation as it's more efficient.
The radius for the top left corner.
The radius for the top right corner.
The radius for the bottom left corner.
The radius for the bottom right corner.
An interface for making transformations to an image's pixel data.
NOTE: If ImageFetchResult.image or DecodeResult.image is not a BitmapDrawable, it will be converted to one. This will cause animated drawables to only draw the first frame of their animation.
A Transformation that crops an image using a centered circle as the mask.
A Transformation that crops the image to fit the target's dimensions and rounds the corners of the image.
An interface for making transformations to an image's pixel data.
A Drawable that crossfades from start to end.
NOTE: The animation can only be executed once as the start drawable is dereferenced at the end of the transition.
The duration of the animation in milliseconds.
A Transition that crossfades from the current drawable to a new one.
The duration of the animation in milliseconds.
Start the transition animation.
Implementations are responsible for calling the correct Target lifecycle callback. See CrossfadeTransition for an example.
A Target that supports applying Transitions.
A class to animate between a Target's current drawable and the result of an image request.
NOTE: A Target must implement TransitionTarget to support applying Transitions. If the Target does not implement TransitionTarget, any Transitions will be ignored.
Start the transition animation.
Implementations are responsible for calling the correct Target lifecycle callback. See CrossfadeTransition for an example.
A Transition that crossfades from the current drawable to a new one.
A class to animate between a Target's current drawable and the result of an image request.
A Target that supports applying Transitions.
Public utility methods for Coil.
A Logger implementation that writes to the platform's default logging mechanism.
NOTE: You should not enable this in release builds. Adding this to your image loader reduces performance. Additionally, this will log URLs which can contain personally identifiable information.
The minimum level for this logger to log.
An efficient container to store two Ints.
Returns a representation of an immutable list of all enum entries, in the order they're declared.
This method may be used to iterate over the enum entries.
The priority level for a log message.
Returns the enum constant of this type with the specified name. The string must match exactly an identifier used to declare an enum constant in this type. (Extraneous whitespace characters are not permitted.)
Returns an array containing the constants of this enum type, in the order they're declared.
Returns the enum constant of this type with the specified name. The string must match exactly an identifier used to declare an enum constant in this type. (Extraneous whitespace characters are not permitted.)
if this enum type has no constant with the specified name
Returns an array containing the constants of this enum type, in the order they're declared.
This method may be used to iterate over the constants.
The minimum level for this logger to log.
A Logger implementation that writes to the platform's default logging mechanism.
An efficient container to store two Ints.
Logging interface for ImageLoaders.
Convert null and Bitmap.Config.HARDWARE configs to Bitmap.Config.ARGB_8888.
Convert null and Bitmap.Config.HARDWARE configs to Bitmap.Config.ARGB_8888.
True if the image can be shared between multiple Targets at the same time.
For example, a bitmap can be shared between multiple targets if it's immutable. Conversely, an animated image cannot be shared as its internal state is being mutated while its animation is running.
True if the image can be shared between multiple Targets at the same time.
For example, a bitmap can be shared between multiple targets if it's immutable. Conversely, an animated image cannot be shared as its internal state is being mutated while its animation is running.
A graphics surface that can be drawn on.
Register a factory of Decoder.Factorys.
Register a factory of Fetcher.Factorys.
Append an Interceptor to the end of the list.
Register a Mapper.
Register a Keyer.
Register a Fetcher.Factory.
Register a Decoder.Factory.
Register a Decoder.Factory.
Register a Fetcher.Factory.
Append an Interceptor to the end of the list.
Register a Keyer.
Register a Mapper.
Register a factory of Decoder.Factorys.
Register a factory of Fetcher.Factorys.
Registry for all the components that an ImageLoader uses to fulfil image requests.
Use this class to register support for custom Interceptors, Mappers, Keyers, Fetchers, and Decoders.
Create a new Decoder using the registered decoderFactories.
Create a new Fetcher using the registered fetcherFactories.
Create a new Decoder using the registered decoderFactories.
A Pair where the first element is the new Decoder and the second element is the index of the factory in decoderFactories that created it. Returns 'null' if a Decoder cannot be created for result.
Create a new Fetcher using the registered fetcherFactories.
A Pair where the first element is the new Fetcher and the second element is the index of the factory in fetcherFactories that created it. Returns 'null' if a Fetcher cannot be created for data.
Implement this on your Drawable implementation to provide a custom Image.size.
An Image backed by an Android Drawable.
Implement this on your Drawable implementation to provide a custom Image.size.
Called after Decoder.decode.
This is skipped if Fetcher.fetch does not return a SourceFetchResult.
The Decoder that was used to handle the request.
The Options that were passed to Decoder.decode.
The result of Decoder.decode.
Called before Decoder.decode.
This is skipped if Fetcher.fetch does not return a SourceFetchResult.
The Decoder that will be used to handle the request.
The Options that will be passed to Decoder.decode.
Called after Fetcher.fetch.
The Fetcher that was used to handle the request.
The Options that were passed to Fetcher.fetch.
The result of Fetcher.fetch.
Called before Fetcher.fetch.
The Fetcher that will be used to handle the request.
The Options that will be passed to Fetcher.fetch.
A listener for tracking the progress of an image request. This class is useful for measuring analytics, performance, or other metrics tracking.
Called after Decoder.decode.
Called before Decoder.decode.
Called after Fetcher.fetch.
Called before Fetcher.fetch.
Called after Keyer.key.
Called before Keyer.key.
Called after Mapper.map.
Called before Mapper.map.
Called if the request is cancelled.
Called if an error occurs while executing the request.
Called immediately after Target.onStart.
Called if the request completes successfully.
Called after SizeResolver.size.
Called before SizeResolver.size.
Called after any Transformations are applied.
Called before any Transformations are applied.
Called after Transition.transition.
Called before Transition.transition.
Called after Mapper.map.
The data after it has been converted. If there were no applicable mappers, output will be the same as ImageRequest.data.
Called if the request is cancelled.
Called if an error occurs while executing the request.
Called immediately after Target.onStart.
Called if the request completes successfully.
Called before SizeResolver.size.
The SizeResolver that will be used to get the Size for this request.
Called after any Transformations are applied.
This is skipped if ImageRequest.transformations is empty.
The Image that was transformed.
Called before any Transformations are applied.
This is skipped if ImageRequest.transformations is empty.
The Image that will be transformed.
Called after Transition.transition.
This is skipped if transition is a NoneTransition or ImageRequest.target does not implement TransitionTarget.
Called before Transition.transition.
This is skipped if transition is a NoneTransition or ImageRequest.target does not implement TransitionTarget.
Public to support static extensions.
A Drawable backed by a generic Image.
Create a new ImageLoader without configuration.
Create a new ImageLoader instance.
A convenience method to set interceptorCoroutineContext, fetcherCoroutineContext, and decoderCoroutineContext in one call.
The CoroutineContext that Decoder.decode will be executed in.
Default: Dispatchers.IO
Set the default disk cache policy.
Set the DiskCache.
NOTE: By default, ImageLoaders share the same disk cache instance. This is necessary as having multiple disk cache instances active in the same directory at the same time can corrupt the disk cache.
Set a lazy callback to create the DiskCache.
Prefer using this instead of diskCache(DiskCache).
NOTE: By default, ImageLoaders share the same disk cache instance. This is necessary as having multiple disk cache instances active in the same directory at the same time can corrupt the disk cache.
Set the default error image to use when a request fails.
Set the EventListener.Factory to create per-request EventListeners.
Set a single EventListener that will receive all callbacks for requests launched by this image loader.
Set the default fallback image to use if ImageRequest.data is null.
The CoroutineContext that Fetcher.fetch will be executed in.
Default: Dispatchers.IO
Set the default FileSystem for any image requests.
Create a new ImageLoader instance.
Set the ComponentRegistry.
Build and set the ComponentRegistry.
A convenience method to set interceptorCoroutineContext, fetcherCoroutineContext, and decoderCoroutineContext in one call.
The CoroutineContext that Decoder.decode will be executed in.
Set the default disk cache policy.
Set the default error image to use when a request fails.
Set a single EventListener that will receive all callbacks for requests launched by this image loader.
Set the EventListener.Factory to create per-request EventListeners.
Set the default fallback image to use if ImageRequest.data is null.
The CoroutineContext that Fetcher.fetch will be executed in.
Set the default FileSystem for any image requests.
The CoroutineContext that the Interceptor chain will be executed in.
Set the Logger to write logs to.
Set the MemoryCache.
Set a lazy callback to create the MemoryCache.
Set the default memory cache policy.
Set the default network cache policy.
Set the default placeholder image to use when a request starts.
Set the default precision for a request. Precision controls whether the size of the loaded image must match the request's size exactly or not.
Enables adding all components (fetchers and decoders) that are supported by the service locator to this ImageLoader's ComponentRegistry. All of Coil's first party decoders and fetchers are supported.
The CoroutineContext that the Interceptor chain will be executed in.
Default: EmptyCoroutineContext
Set the default memory cache policy.
Set the MemoryCache.
Set a lazy callback to create the MemoryCache.
Prefer using this instead of memoryCache(MemoryCache).
Set the default network cache policy.
NOTE: Disabling writes has no effect.
Set the default placeholder image to use when a request starts.
Set the default precision for a request. Precision controls whether the size of the loaded image must match the request's size exactly or not.
Default: Precision.EXACT
The components used to fulfil image requests.
The default values that are used to fill in unset ImageRequest values.
Enqueue the request to be executed asynchronously.
A Disposable which can be used to cancel or check the status of the request.
The request to execute.
Execute the request in the current coroutine scope.
A SuccessResult if the request completes successfully. Else, returns an ErrorResult.
The request to execute.
A service class that loads images by executing ImageRequests. Image loaders handle caching, data fetching, image decoding, request management, memory management, and more.
Image loaders are designed to be shareable and work best when you create a single instance and share it throughout your app.
The components used to fulfil image requests.
The default values that are used to fill in unset ImageRequest values.
An in-memory cache of previously loaded images.
Enqueue the request to be executed asynchronously.
Execute the request in the current coroutine scope.
Execute the request and block the current thread until it completes.
Create an ImageLoader.Builder that shares the same resources and configuration as this image loader.
Cancel any new and in progress requests, clear the MemoryCache, and close any open system resources.
An in-memory cache of previously loaded images.
Create an ImageLoader.Builder that shares the same resources and configuration as this image loader.
Cancel any new and in progress requests, clear the MemoryCache, and close any open system resources.
True if the image can be shared between multiple Targets at the same time.
For example, a bitmap can be shared between multiple targets if it's immutable. Conversely, an animated image cannot be shared as its internal state is being mutated while its animation is running.
Represents a platform-specific context that acts as an interface to global information about an application environment.
Return the separate segments of the Uri.path.
Sets the strategy for handling the EXIF orientation flag for images decoded by BitmapFactoryDecoder.
Sets the maximum number of parallel BitmapFactory or ImageDecoder decode operations at once.
Increasing this number will allow more parallel decode operations, however it can result in worse UI performance.
Execute the request and block the current thread until it completes.
Returns the URI's Uri.path formatted according to the URI's native Uri.separator.
A grid of pixels.
A graphics surface that can be drawn on.
Registry for all the components that an ImageLoader uses to fulfil image requests.
An Image backed by an Android Drawable.
A listener for tracking the progress of an image request. This class is useful for measuring analytics, performance, or other metrics tracking.
A Drawable backed by a generic Image.
A service class that loads images by executing ImageRequests. Image loaders handle caching, data fetching, image decoding, request management, memory management, and more.
Represents a platform-specific context that acts as an interface to global information about an application environment.
Return the separate segments of the Uri.path.
Sets the strategy for handling the EXIF orientation flag for images decoded by BitmapFactoryDecoder.
Sets the maximum number of parallel BitmapFactory or ImageDecoder decode operations at once.
Execute the request and block the current thread until it completes.
Create a new ImageLoader without configuration.
Enables adding all components (fetchers and decoders) that are supported by the service locator to this ImageLoader's ComponentRegistry. All of Coil's first party decoders and fetchers are supported.
Return the separate segments of the Uri.path.
Enables adding all components (fetchers and decoders) that are supported by the service locator to this ImageLoader's ComponentRegistry. All of Coil's first party decoders and fetchers are supported.
If true, all components that are supported by the service locator will be added to this ImageLoader's ComponentRegistry.
If false, no components from the service locator will be added to the ImageLoader's ComponentRegistry.
If true, rewrite a GIF's frame delay to a default value if it is below a threshold. See https://github.com/coil-kt/coil/issues/540 for more info.
A Decoder that uses ImageDecoder to decode GIFs, animated WebPs, and animated HEIFs.
NOTE: Animated HEIF files are only supported on API 30 and above.
If true, rewrite a GIF's frame delay to a default value if it is below a threshold. See https://github.com/coil-kt/coil/issues/540 for more info.
An interface for making transformations to an animated image's pixel data.
Apply the transformation to the canvas.
If true, rewrite a GIF's frame delay to a default value if it is below a threshold. See https://github.com/coil-kt/coil/issues/540 for more info.
A Decoder that uses Movie to decode GIFs.
NOTE: Prefer using AnimatedImageDecoder on API 28 and above.
If true, rewrite a GIF's frame delay to a default value if it is below a threshold. See https://github.com/coil-kt/coil/issues/540 for more info.
Pass this to setRepeatCount to repeat infinitely.
Pass this to setRepeatCount to repeat infinitely.
Get the AnimatedTransformation.
Get the number of times the animation will repeat.
A Drawable that supports rendering Movies (i.e. GIFs).
NOTE: Prefer using AnimatedImageDecoder and AnimatedImageDrawable on API 28 and above.
Get the AnimatedTransformation.
Get the number of times the animation will repeat.
Set the AnimatedTransformation to apply when drawing.
Set the number of times to repeat the animation.
Set the AnimatedTransformation to apply when drawing.
Set the number of times to repeat the animation.
If the animation is already running, any iterations that have already occurred will count towards the new count.
NOTE: This method matches the behavior of AnimatedImageDrawable.setRepeatCount. i.e. setting repeatCount to 2 will result in the animation playing 3 times. Setting repeatCount to 0 will result in the animation playing once.
Default: REPEAT_INFINITE
Indicates that the AnimatedTransformation removed all transparent pixels in the image.
Indicates that the AnimatedTransformation added transparent pixels to the image.
Indicates that the AnimatedTransformation did not change the image's opacity.
Return this unless you add transparent pixels to the image or remove all transparent pixels in the image.
Returns a representation of an immutable list of all enum entries, in the order they're declared.
This method may be used to iterate over the enum entries.
Represents the opacity of an image's pixels after applying an AnimatedTransformation.
Indicates that the AnimatedTransformation did not change the image's opacity.
Indicates that the AnimatedTransformation added transparent pixels to the image.
Indicates that the AnimatedTransformation removed all transparent pixels in the image.
Returns the enum constant of this type with the specified name. The string must match exactly an identifier used to declare an enum constant in this type. (Extraneous whitespace characters are not permitted.)
Returns an array containing the constants of this enum type, in the order they're declared.
Returns the enum constant of this type with the specified name. The string must match exactly an identifier used to declare an enum constant in this type. (Extraneous whitespace characters are not permitted.)
if this enum type has no constant with the specified name
Returns an array containing the constants of this enum type, in the order they're declared.
This method may be used to iterate over the constants.
Set the AnimatedTransformation that will be applied to the result if it is an animated Drawable.
A Decoder that uses ImageDecoder to decode GIFs, animated WebPs, and animated HEIFs.
An interface for making transformations to an animated image's pixel data.
Represents the opacity of an image's pixels after applying an AnimatedTransformation.
Set the AnimatedTransformation that will be applied to the result if it is an animated Drawable.
Set the callback to be invoked at the end of the animation if the result is an animated Drawable.
Set the callback to be invoked at the start of the animation if the result is an animated Drawable.
Set the number of times to repeat the animation if the result is an animated Drawable.
Set the callback to be invoked at the end of the animation if the result is an animated Drawable.
Set the callback to be invoked at the start of the animation if the result is an animated Drawable.
A function that returns the current time.
A CacheStrategy that uses the 'Cache-Control' response header and associated headers to determine if a cached response should be used.
See: https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Cache-Control
This implementation is based on OkHttp's CacheStrategy.
A function that returns the current time.
A CacheStrategy that uses the 'Cache-Control' response header and associated headers to determine if a cached response should be used.
Utility methods used to read/write a NetworkResponse from/to the disk cache.
The default CacheStrategy, which always returns the disk cache response.
The default CacheStrategy, which always returns the disk cache response.
Launch a new network request.
Use the response's body as the ImageSource.
Do not write anything to the disk cache.
Write response to the disk cache. Set NetworkResponse.body to null to skip writing the response body.
Write response to the disk cache. Set NetworkResponse.body to null to skip writing the response body.
Controls the behavior around reading/writing responses from/to the disk cache.
A naive ConnectivityChecker implementation that is always online.
A naive ConnectivityChecker implementation that is always online.
Determines if the device is able to access the internet.
An asynchronous HTTP client that executes NetworkRequests and returns NetworkResponses.
Parse the response's content-type header.
"text/plain" is often used as a default/fallback MIME type. Attempt to guess a better MIME type from the file extension.
A Fetcher that fetches and caches images from the network.
The URL to fetch.
The HTTP method.
The HTTP headers.
The HTTP request body.
Represents an HTTP request.
The URL to fetch.
The HTTP method.
The HTTP headers.
The HTTP request body.
The HTTP response code.
Timestamp of when the request was sent.
Timestamp of when the response was received.
The HTTP headers.
The HTTP response body.
The underlying response instance. If executed by OkHttp, this is okhttp3.Response. If executed by Ktor, this is io.ktor.client.statement.HttpResponse. If returned from the cache (or any other method), this is null.
Represents an HTTP response.
The HTTP response code.
Timestamp of when the request was sent.
Timestamp of when the response was received.
The HTTP headers.
The HTTP response body.
The underlying response instance. If executed by OkHttp, this is okhttp3.Response. If executed by Ktor, this is io.ktor.client.statement.HttpResponse. If returned from the cache (or any other method), this is null.
Set the HTTP request body for any network operations performed by this image request.
Set the HTTP request headers for any network operations performed by this image request.
Set the HTTP request method for any network operations performed by this image request.
Utility methods used to read/write a NetworkResponse from/to the disk cache.
Controls the behavior around reading/writing responses from/to the disk cache.
Determines if the device is able to access the internet.
Exception for an unexpected, non-2xx HTTP response.
An asynchronous HTTP client that executes NetworkRequests and returns NetworkResponses.
A Fetcher that fetches and caches images from the network.
A list of HTTP headers.
Represents an HTTP request.
Represents an HTTP response.
Set the HTTP request body for any network operations performed by this image request.
Set the HTTP request headers for any network operations performed by this image request.
Set the HTTP request method for any network operations performed by this image request.
If true, uses the SVG's view bounds as the intrinsic size for the SVG. If false, uses the SVG's width/height as the intrinsic size for the SVG.
If true, renders the SVG to a bitmap immediately after decoding. Else, the SVG will be rendered at draw time. Rendering at draw time is more memory efficient, but depending on the complexity of the SVG, can be slow.
If true and the target size is Size.ORIGINAL, multiplies the source dimensions of the image by the device's display density. NOTE: This only affects Android.
A Decoder that decodes SVGs. Relies on external dependencies to parse and decode the SVGs.
If true, uses the SVG's view bounds as the intrinsic size for the SVG. If false, uses the SVG's width/height as the intrinsic size for the SVG.
If true, renders the SVG to a bitmap immediately after decoding. Else, the SVG will be rendered at draw time. Rendering at draw time is more memory efficient, but depending on the complexity of the SVG, can be slow.
If true and the target size is Size.ORIGINAL, multiplies the source dimensions of the image by the device's display density. NOTE: This only affects Android.
If true, renders the SVG to a bitmap immediately after decoding. Else, the SVG will be rendered at draw time. Rendering at draw time is more memory efficient, but depending on the complexity of the SVG, can be slow.
If true and the target size is Size.ORIGINAL, multiplies the source dimensions of the image by the device's display density. NOTE: This only affects Android.
If true, uses the SVG's view bounds as the intrinsic size for the SVG. If false, uses the SVG's width/height as the intrinsic size for the SVG.
Specifies additional CSS rules that will be applied when rendering an SVG in addition to any rules specified in the SVG itself.
A Decoder that decodes SVGs. Relies on external dependencies to parse and decode the SVGs.
Create a new FakeImageLoaderEngine that returns drawable for all requests.
Create a new FakeImageLoaderEngine that returns image for all requests.
Add an OptionalInterceptor.
Create a new FakeImageLoaderEngine instance.
Remove all OptionalInterceptors.
Set a default Image that will be returned if no OptionalInterceptors handle the request. If a default is not set, any requests not handled by an OptionalInterceptor will throw an exception.
Set the default Interceptor that will be called if no OptionalInterceptors handle the request. If a default is not set, any requests not handled by an OptionalInterceptor will throw an exception.
Add an OptionalInterceptor.
Create a new FakeImageLoaderEngine instance.
Remove all OptionalInterceptors.
Set a default Image that will be returned if no OptionalInterceptors handle the request. If a default is not set, any requests not handled by an OptionalInterceptor will throw an exception.
Set the default Interceptor that will be called if no OptionalInterceptors handle the request. If a default is not set, any requests not handled by an OptionalInterceptor will throw an exception.
Add an interceptor that will return Image if data is equal to an incoming ImageRequest's data.
Add an interceptor that will call interceptor if predicate returns true.
Remove interceptor from the list of OptionalInterceptors.
Set a callback to modify an incoming ImageRequest before it's handled by the interceptors.
Add an interceptor that will return Image if data is equal to an incoming ImageRequest's data.
Add an interceptor that will return Image if predicate returns true.
Add an interceptor that will call interceptor if predicate returns true.
Remove interceptor from the list of OptionalInterceptors.
Set a callback to modify an incoming ImageRequest before it's handled by the interceptors.
By default, FakeImageLoaderEngine uses this callback to clear an ImageRequest's transition and setting this callback replaces that behaviour.
An Interceptor that can either:
Return an ImageResult so no subsequent interceptors are called.
Return null to delegate to the next OptionalInterceptor in the list.
Optionally, call Interceptor.Chain.proceed to call through to the ImageLoader's real interceptor chain. Typically, this will map, fetch, and decode the data using the image loader's real image engine.
A callback to support modifying an ImageRequest before it's handled by the OptionalInterceptors.
An ImageLoader interceptor that intercepts all incoming requests before they're fetched and decoded by the image loader's real image engine. This class is useful for overriding an image loader's responses in tests:
![[android]SvgImage](../coil-svg/coil3.svg/[android]-svg-image/index.html){kind=link}
![[nonAndroid]SvgImage](../coil-svg/coil3.svg/[non-android]-svg-image/index.html){kind=link}
val engine = FakeImageLoaderEngine.Builder()
.intercept("https://www.example.com/image.jpg", FakeImage())
.intercept({ it is String && it.endsWith("test.png") }, FakeImage())
.default(FakeImage(color = 0x0000FF))
.build()
val imageLoader = ImageLoader.Builder(context)
.components { add(engine) }
.build()An Interceptor that can either:
A callback to support modifying an ImageRequest before it's handled by the OptionalInterceptors.
Returns a Flow that emits when a request starts.
Returns a Flow that emits when a request completes.
Create a new FakeImageLoaderEngine.Builder with the same configuration.
Create a new FakeImageLoaderEngine.Builder with the same configuration.
Returns a Flow that emits when a request starts.
Returns a Flow that emits when a request completes.
An ImageLoader interceptor that intercepts all incoming requests before they're fetched and decoded by the image loader's real image engine. This class is useful for overriding an image loader's responses in tests:
Create a new FakeImageLoaderEngine that returns drawable for all requests.
Create a new FakeImageLoaderEngine that returns image for all requests.
A Decoder that uses MediaMetadataRetriever to fetch and decode a frame from a video.
A Decoder that uses MediaMetadataRetriever to fetch and decode a frame from a video.
Set the frame index to extract from a video.
Set the time in microseconds of the frame to extract from a video.
Set the time in milliseconds of the frame to extract from a video.
Set the option for how to decode the video frame.
Set the time as a percentage of the total duration for the frame to extract from a video.
Set the frame index to extract from a video.
When both videoFrameIndex and other videoFrame-prefixed properties are set, videoFrameIndex will take precedence.
Set the time in microseconds of the frame to extract from a video.
When both videoFrameMicros (or videoFrameMillis) and videoFramePercent are set, videoFrameMicros (or videoFrameMillis) will take precedence.
Set the time in milliseconds of the frame to extract from a video.
When both videoFrameMicros (or videoFrameMillis) and videoFramePercent are set, videoFrameMicros (or videoFrameMillis) will take precedence.
Set the option for how to decode the video frame.
Must be one of OPTION_PREVIOUS_SYNC, OPTION_NEXT_SYNC, OPTION_CLOSEST_SYNC, OPTION_CLOSEST.
Set the time as a percentage of the total duration for the frame to extract from a video.
When both videoFrameMicros (or videoFrameMillis) and videoFramePercent are set, videoFrameMicros (or videoFrameMillis) will take precedence.
A factory that creates the new singleton ImageLoader.
To configure how the singleton ImageLoader is created either:
Implement SingletonImageLoader.Factory on your Android Application class.
Or call SingletonImageLoader.setSafe with your SingletonImageLoader.Factory.
Return a new ImageLoader.
Return a new ImageLoader.
Get the singleton ImageLoader.
A class that holds the singleton ImageLoader instance.
A factory that creates the new singleton ImageLoader.
Get the singleton ImageLoader.
Clear the ImageLoader or Factory held by this class.
Set the Factory that will be used to lazily create the singleton ImageLoader.
Set the singleton ImageLoader and overwrite any previously set value.
Set the Factory that will be used to lazily create the singleton ImageLoader and overwrite any previously set value.
Clear the ImageLoader or Factory held by this class.
Set the Factory that will be used to lazily create the singleton ImageLoader.
This function is similar to setUnsafe except:
If an ImageLoader has already been created it will not be replaced with factory.
If the singleton ImageLoader has already been created, an error will be thrown as it indicates setSafe is being called too late and after get has already been called.
It's safe to call setSafe multiple times.
The factory is guaranteed to be invoked at most once.
Set the singleton ImageLoader and overwrite any previously set value.
Set the Factory that will be used to lazily create the singleton ImageLoader and overwrite any previously set value.
The factory is guaranteed to be invoked at most once.
Get the singleton ImageLoader.
A class that holds the singleton ImageLoader instance.
Get the singleton ImageLoader.
Get the ImageResult of the most recently executed image request that's attached to this view.
Load the image referenced by data and set it on this ImageView.
Example:
imageView.load("https://example.com/image.jpg") {
crossfade(true)
transformations(CircleCropTransformation())
}The data to load.
The ImageLoader that will be used to enqueue the ImageRequest. By default, the singleton ImageLoader will be used.
An optional lambda to configure the ImageRequest.
Get the ImageResult of the most recently executed image request that's attached to this view.
![[android]SvgImage](coil-svg/coil3.svg/[android]-svg-image/index.html){kind=link}
![[nonAndroid]SvgImage](coil-svg/coil3.svg/[non-android]-svg-image/index.html){kind=link}
OkHttpNetworkFetcherFactory with a custom CacheStrategy on Android.CacheControlCacheStrategy computing the age of a cache entry incorrectly.ImageRequest.bitmapConfig would only be respected on >= API 28 if it was ARGB_8888 or HARDWARE.Image.toBitmap with a hardware bitmap-backed BitmapImage.AsyncImageModelEqualityDelegate.Default comparing equality incorrectly for non-ImageRequest models.Coil 3.0.0 is the next major release of Coil with full support for Compose Multiplatform.
For the full list of improvements and important changes in 3.0.0, check out the upgrade guide.
Changes since 3.0.0-rc02:
For the full list of improvements and important changes in 3.x, check out the upgrade guide. Changes since 3.0.0-rc01:
BlackholeDecoder. This simplifies disk-cache only preloading.remember functions for ConstraintsSizeResolver and DrawScopeSizeResolver.EqualityDelegate as a parameter to AsyncImage. Instead, it should be set through LocalAsyncImageModelEqualityDelegate.AsyncImage not rendering when parent composable uses IntrinsicSize.AsyncImage filling the available constraints when AsyncImagePainter has no child painter.rememberAsyncImagePainter recomposing infinitely when its state is observed due to EqualityDelegate being ignored.File/Path paths with special characters.FileSystem implementations with VideoFrameDecoder.3.0.0.androidx.annotation to 1.9.0.For the full list of improvements and important changes in 3.x, check out the upgrade guide. Changes since 3.0.0-alpha10:
addLastModifiedToFileCacheKey by default and allow it to be set per request. The behaviour can be reenabled with the same flag.coil-network-cache-control artifact, which implements Cache-Control header support.scaleToDensity property to SvgDecoder.Factory. This property ensure SVGs with intrinsic dimensions are multiplied by the devices density (only supported on Android).ExifOrientationPolicy to ExifOrientationStrategy.MemoryCache on get.ConstraintsSizeResolver public.setSingletonImageLoaderFactory.coil-network-ktor3pdf to list of mime types.ImageLoader.Builder.networkObserverEnabled with a ConnectivityChecker interface for NetworkFetcher.ConnectivityChecker.ONLINE to the constructor for KtorNetworkFetcherFactory/OkHttpNetworkFetcherFactory.Res.getUri:maxBitmapSize property to ImageLoader and ImageRequest.Size.ORIGINAL and causing an out of memory exception.ExifOrientationPolicy to be an interface to support custom policies.Uri handling of Windows file paths.@ExperimentalCoilApi from the Image APIs.io.coil-kt.coil3:coil-network-ktor artifact to io.coil-kt.coil3:coil-network-ktor2 which depends on Ktor 2.x. Additionally, introduce io.coil-kt.coil3:coil-network-ktor3 which depends on Ktor 3.x. wasmJs support is only available in Ktor 3.x.AsyncImagePainter.restart() to manually restart an image request.@ExperimentalCoilApi from NetworkClient and related classes.ImageRequest to avoid unnecessary Extras and Map allocations.ImageLoader.execute, AsyncImage, SubcomposeAsyncImage, and rememberAsyncImagePainter. (#2205)ImageRequest and ImageLoader dispatcher methods to coroutineContext. For instance, ImageRequest.Builder.dispatcher is now ImageRequest.Builder.coroutineContext. This was renamed as the method now accepts any CoroutineContext and no longer requires a Dispatcher.IllegalStateException: Reading a state that was created after the snapshot was taken or in a snapshot that has not yet been applied which could occur due to a race condition.Dispatchers.Main.immediate. As a result you should re-add a dependency on kotlinx-coroutines-swing on JVM. If it's not imported then ImageRequests won't be dispatched immediately and will have one frame of delay before setting the ImageRequest.placeholder or resolving from the memory cache.AsyncImagePainter no longer waits for onDraw by default and instead uses Size.ORIGINAL.onDraw, set DrawScopeSizeResolver as your ImageRequest.sizeResolver.Image API. Notably, asCoilImage has been renamed to asImage.AsyncImagePainter.state has been changed to StateFlow<AsyncImagePainter.State>. Use collectAsState to observe its value. This improves performance.AsyncImagePainter.imageLoader and AsyncImagePainter.request have been combined into StateFlow<AsyncImagePainter.Inputs>. Use collectAsState to observe its value. This improves performance.android.resource://example.package.name/drawable/image URIs as it prevents resource shrinking optimizations.ResourceUriMapper in your component registry.AsyncImagePreviewHandler to support controlling AsyncImagePainter's preview rendering behavior.LocalAsyncImagePreviewHandler to override the preview behavior.coil-compose improvements, AsyncImagePainter now attempts to execute execute the ImageRequest by default instead of defaulting to displaying ImageRequest.placeholder. Requests that use the network or files are expected to fail in the preview environment, however Android resources should work.CoroutineContext to any CoroutineDispatcher methods. (#2241).Dispatchers.Main.immediate in Compose. As a side-effect, kotlinx-coroutines-swing no longer needs to be imported on JVM.async and create a disposable in Compose to improve performance (thanks @mlykotom!). (#2205)ImageLoader extras to Options. (#2223)crossfade(false) not working on non-Android targets.SvgDecoder on non-Android targets to render to a bitmap instead of render the image at draw-time. This improves performance.SvgDecoder(renderToBitmap).ScaleDrawable from coil-gif to coil-core.wasmJs target.DrawablePainter and DrawableImage to support drawing Images that aren't backed by a Bitmap on non-Android platforms.Image APIs are experimental and likely to change between alpha releases.ContentPainterModifier to implement Modifier.Node.ImageLoader.Builder.placeholder/error/fallback not being used by ImageRequest.rememberAsyncImagePainter, AsyncImage, and SubcomposeAsyncImage restartable and skippable. This improves performance by avoiding recomposition unless one of the composable's arguments changes.modelEqualityDelegate argument to rememberAsyncImagePainter, AsyncImage, and SubcomposeAsyncImage to control whether the model will trigger a recomposition.ContentPainterModifier to implement Modifier.Node.rememberAsyncImagePainter, AsyncImage, and SubcomposeAsyncImage if ImageRequest.listener or ImageRequest.target change.AsyncImagePainter.androidx.collection to 1.4.0.androidx.lifecycle to 2.7.0.Lazy from OkHttpNetworkFetcherFactory and KtorNetworkFetcherFactory's public API.Call.Factory instead of OkHttpClient in OkHttpNetworkFetcherFactory.NetworkResponseBody to wrap a ByteString.coil-network has been renamed to coil-network-ktor. Additionally, there is a new coil-network-okhttp artifact that depends on OkHttp and doesn't require specifying a Ktor engine.Fetcher.Factory manually using KtorNetworkFetcherFactory or OkHttpNetworkFetcherFactory.NSUrl on Apple platforms.clipToBounds parameter to AsyncImage.coil-gif, coil-network, coil-svg, and coil-video's packages have been updated so all their classes are part of coil.gif, coil.network, coil.svg, and coil.video respectively. This helps avoid class name conflicts with other artifacts.ImageDecoderDecoder has been renamed to AnimatedImageDecoder.coil-gif, coil-network, coil-svg, and coil-video's components are now automatically added to each ImageLoader's ComponentRegistry.3.0.0-alpha01 you do not need to manually add NetworkFetcher.Factory() to your ComponentRegistry. Simply importing io.coil-kt.coil3:coil-network:[version] and a Ktor engine is enough to load network images.ComponentRegistry manually. Any manually added components take precedence over components that are added automatically.ImageLoader.Builder.serviceLoaderEnabled(false).coil-svg on all platforms. It's backed by AndroidSVG on Android and SVGDOM on non-Android platforms.ImageDecoder API internally, which has performance benefits when decoding directly from a file, resource, or content URI.coil3.Uri parsing fixes.io.coil-kt.coil3 and its imports were updated to coil3. This allows Coil 3 to run side by side with Coil 2 without binary compatibility issues. For example, io.coil-kt:coil:[version] is now io.coil-kt.coil3:coil:[version].coil-base and coil-compose-base artifacts were renamed to coil-core and coil-compose-core respectively to align with the naming conventions used by Coroutines, Ktor, and AndroidX.MediaDataSourceFetcher.Factory to support decoding MediaDataSource implementations in coil-video. (#1795)SHIFT6m device to the hardware bitmap blocklist. (#1812)304 Not Modified when cached headers include non-ASCII characters. (#1839)FakeImageEngine not updating the interceptor chain's request. (#1905)accompanist-drawablepainter to 0.32.0.androidx.annotation to 1.7.0.androidx.compose.foundation to 1.5.4.androidx.core to 1.12.0.androidx.exifinterface:exifinterface to 1.3.6.androidx.lifecycle to 2.6.2.com.squareup.okhttp3 to 4.12.0.com.squareup.okio to 3.6.0.DiskCache get/edit to openSnapshot/openEditor.ColorDrawable to ColorPainter in AsyncImagePainter.AsyncImage overloads with @NonRestartableComposable.Context.cacheDir lazily in ImageSource.coil-bom.ARGB_8888 if hardware bitmaps are disabled.accompanist-drawablepainter to 0.30.1.androidx.compose.foundation to 1.4.3.androidx.profileinstaller:profileinstaller to 1.3.1.com.squareup.okhttp3 to 4.11.0.coil-test artifact, which includes FakeImageLoaderEngine. This class is useful for hardcoding image loader responses to ensure consistent and synchronous (from the main thread) responses in tests. See here for more info.coil-base (child module of coil) and coil-compose-base (child module of coil-compose).file:// URIs with encoded data. #1601DiskCache now properly computes its maximum size if passed a directory that does not exist. #1620Coil.reset public API. #1506accompanist-drawablepainter to 0.30.0.androidx.annotation to 1.6.0.androidx.appcompat:appcompat-resources to 1.6.1.androidx.compose.foundation to 1.4.0.androidx.core to 1.9.0.androidx.exifinterface:exifinterface to 1.3.6.androidx.lifecycle to 2.6.1.okio to 3.3.0.VideoFrameDecoder on API 30+ to avoid banding. #1487# in FileUriMapper. #1466androidx.annotation to 1.5.0.RoundedCornersTransformation now properly scales the input bitmap.kotlin-parcelize plugin.androidx.appcompat:appcompat-resources to 1.4.2 to work around #1423.ImageRequest.videoFramePercent to coil-video to support specifying the video frame as a percent of the video's duration.ExifOrientationPolicy to configure how BitmapFactoryDecoder treats EXIF orientation data.RoundedCornersTransformation if passed a size with an undefined dimension.accompanist-drawablepainter to 0.25.1.androidx.annotation to 1.4.0.androidx.appcompat:appcompat-resources to 1.5.0.androidx.core to 1.8.0.ByteArrays. (#1202)ImageRequest.Builder.css. (#1210)GenericViewTarget's private methods to protected. (#1273)Coil 2.0.0 is a major iteration of the library and includes breaking changes. Check out the upgrade guide for how to upgrade.
AsyncImage in coil-compose. Check out the documentation for more info.// Display an image from the network.
+AsyncImage(
+ model = "https://example.com/image.jpg",
+ contentDescription = null,
+)
+
+// Display an image from the network with a placeholder, circle crop, and crossfade animation.
+AsyncImage(
+ model = ImageRequest.Builder(LocalContext.current)
+ .data("https://example.com/image.jpg")
+ .crossfade(true)
+ .build(),
+ placeholder = painterResource(R.drawable.placeholder),
+ contentDescription = stringResource(R.string.description),
+ contentScale = ContentScale.Crop,
+ modifier = Modifier.clip(CircleShape)
+)
+DiskCache API.ImageLoader.Builder.diskCache and DiskCache.Builder to configure the disk cache.Cache with Coil 2.0. See here for more info.Cache-Control and other cache headers are still supported - except Vary headers, as the cache only checks that the URLs match. Additionally, only responses with a response code in the range [200..300) are cached.ImageRequest's default Scale is now Scale.FIT.ImageRequest.scale consistent with other classes that have a default Scale.ImageViewTarget still have their Scale auto-detected.Mapper, Fetcher, and Decoder have been refactored to be more flexible.Fetcher.key has been replaced with a new Keyer interface. Keyer creates the cache key from the input data.ImageSource, which allows Decoders to read Files directly using Okio's file system API.rememberImagePainter and ImagePainter have been renamed to rememberAsyncImagePainter and AsyncImagePainter respectively.LocalImageLoader. Check out the deprecation message for more info.NullPointerException immediately. Kotlin's compile-time null safety guards against this happening.Size is now composed of two Dimension values for its width and height. Dimension can either be a positive pixel value or Dimension.Undefined. See here for more info.BitmapPool and PoolableViewTarget have been removed from the library.VideoFrameFileFetcher and VideoFrameUriFetcher have been removed from the library. Use VideoFrameDecoder instead, which supports all data sources.BlurTransformation and GrayscaleTransformation are removed from the library. If you use them, you can copy their code into your project.Transition.transition to be a non-suspending function as it's no longer needed to suspend the transition until it completes.bitmapFactoryMaxParallelism, which restricts the maximum number of in-progress BitmapFactory operations. This value is 4 by default, which improves UI performance.interceptorDispatcher, fetcherDispatcher, decoderDispatcher, and transformationDispatcher.GenericViewTarget, which handles common ViewTarget logic.ByteBuffer to the default supported data types.Disposable has been refactored and exposes the underlying ImageRequest's job.MemoryCache API.ImageRequest.error is now set on the Target if ImageRequest.fallback is null.Transformation.key is replaced with Transformation.cacheKey.Changes from 2.0.0-rc03: - Convert Dimension.Original to be Dimension.Undefined. - This changes the semantics of the non-pixel dimension slightly to fix some edge cases (example) in the size system. - Load images with Size.ORIGINAL if ContentScale is None. - Fix applying ImageView.load builder argument first instead of last. - Fix not combining HTTP headers if response is not modified.
ScaleResolver interface.Size constructors to functions.Dimension.Pixels's toString to only be its pixel value.SystemCallbacks.onTrimMemory.ImageRequest's default size to be the size of the current display instead of Size.ORIGINAL.DiskCache.Builder being marked as experimental. Only DiskCache's methods are experimental.ImageView with one dimension as WRAP_CONTENT would load the image at its original size instead of fitting it into the bounded dimension.MemoryCache.Key, MemoryCache.Value, and Parameters.Entry.Significant changes since 1.4.0:
rememberImagePainter has been renamed to rememberAsyncImagePainter.AsyncImage and SubcomposeAsyncImage. Check out the documentation for more info.LocalImageLoader. Check out the deprecation message for more info.ImageLoader.Builder.diskCache and DiskCache.Builder to configure the disk cache.Cache with Coil 2.0 as the cache can be corrupted if a thread is interrupted while writing to it.Cache-Control and other cache headers are still supported - except Vary headers, as the cache only checks that the URLs match. Additionally, only responses with a response code in the range [200..300) are cached.ImageRequest's default Scale is now Scale.FIT.ImageRequest.scale consistent with other classes that have a default Scale.ImageViewTarget still have their Scale auto-detected.ImageRequest's default size is now Size.ORIGINAL.Mapper, Fetcher, and Decoder have been refactored to be more flexible.Fetcher.key has been replaced with a new Keyer interface. Keyer creates the cache key from the input data.ImageSource, which allows Decoders to read Files directly using Okio's file system API.NullPointerException immediately. Kotlin's compile-time null safety guards against this happening.Size is now composed of two Dimension values for its width and height. Dimension can either be a positive pixel value or Dimension.Original.BitmapPool and PoolableViewTarget have been removed from the library.VideoFrameFileFetcher and VideoFrameUriFetcher are removed from the library. Use VideoFrameDecoder instead, which supports all data sources.BlurTransformation and GrayscaleTransformation are removed from the library. If you use them, you can copy their code into your project.Transition.transition to be a non-suspending function as it's no longer needed to suspend the transition until it completes.bitmapFactoryMaxParallelism, which restricts the maximum number of in-progress BitmapFactory operations. This value is 4 by default, which improves UI performance.interceptorDispatcher, fetcherDispatcher, decoderDispatcher, and transformationDispatcher.GenericViewTarget, which handles common ViewTarget logic.ByteBuffer to the default supported data types.Disposable has been refactored and exposes the underlying ImageRequest's job.MemoryCache API.ImageRequest.error is now set on the Target if ImageRequest.fallback is null.Transformation.key is replaced with Transformation.cacheKey.Changes since 2.0.0-alpha09:
-Xjvm-default=all compiler flag.DecodeUtils.isSvg returning false if there is a new line character after the <svg tag.LocalImageLoader.provides deprecation message clearer.accompanist-drawablepainter to 0.23.1.AsyncImage creating invalid constraints. (#1134)ContentScale argument to AsyncImagePainter. (#1144)Image to ensure that the image is loaded at the correct size.ScaleResolver to support lazily resolving the Scale for an ImageRequest. (#1134)ImageRequest.scale should be replaced by ImageRequest.scaleResolver.scale().accompanist-drawablepainter to 0.23.0.androidx.lifecycle to 2.4.1.DiskCache and ImageSource to use to Okio's FileSystem API. (#1115)AsyncImage performance and split AsyncImage into AsyncImage and SubcomposeAsyncImage. (#1048)SubcomposeAsyncImage provides loading/success/error/content slot APIs and uses subcomposition which has worse performance.AsyncImage provides placeholder/error/fallback arguments to overwrite the Painter that's drawn when loading or if the request is unsuccessful. AsyncImage does not use subcomposition and has much better performance than SubcomposeAsyncImage.AsyncImagePainter.State argument from SubcomposeAsyncImage.content. Use painter.state if needed.onLoading/onSuccess/onError callbacks to both AsyncImage and SubcomposeAsyncImage.LocalImageLoader. (#1101)ImageRequest.tags. (#1066)isGif, isWebP, isAnimatedWebP, isHeif, and isAnimatedHeif in DecodeUtils into coil-gif. Add isSvg to coil-svg. (#1117)FetchResult and DecodeResult to be non-data classes. (#1114)DiskCache.Builder context argument. (#1099)ImageDecoder in ImageDecoderDecoder. (#1109)accompanist-drawablepainter to 0.22.1-rc.androidx.appcompat:appcompat-resources to 1.4.1.ImageSource.Metadata to support decoding from assets, resources, and content URIs without buffering or temporary files. (#1060)AsyncImage has positive constraints. (#1028)DefaultContent for AsyncImage if loading, success, and error are all set. (#1026)LruCache instead of the platform LruCache. (#1047)accompanist-drawablepainter to 0.22.0-rc.androidx.collection to 1.2.0.Size to support using the image's original size for either dimension.Size is now composed of two Dimension values for its width and height. Dimension can either be a positive pixel value or Dimension.Original.wrap_content, Constraints.Infinity) when one dimension is a fixed pixel value.AsyncImage.SuccessResult.memoryCacheKey should always be null if imageLoader.memoryCache is null.ImageLoader, SizeResolver, and ViewSizeResolver constructor-like invoke functions to top level functions.CrossfadeDrawable start and end drawables public API.ImageLoader placeholder/error/fallback drawables.SuccessResult's constructor.androidx.collection instead of androidx.collection-ktx.AsyncImage to coil-compose.AsyncImage is a composable that executes an ImageRequest asynchronously and renders the result.AsyncImage is intended to replace rememberImagePainter for most use cases.Image and supports the same arguments: Alignment, ContentScale, alpha, ColorFilter, and FilterQuality.AsyncImagePainter state using the content, loading, success, and error arguments.rememberImagePainter has with resolving image size and scale.// Only draw the image.
+AsyncImage(
+ model = "https://example.com/image.jpg",
+ contentDescription = null, // Avoid `null` and set this to a localized string if possible.
+)
+
+// Draw the image with a circle crop, crossfade, and overwrite the `loading` state.
+AsyncImage(
+ model = ImageRequest.Builder(LocalContext.current)
+ .data("https://example.com/image.jpg")
+ .crossfade(true)
+ .build(),
+ contentDescription = null,
+ modifier = Modifier
+ .clip(CircleShape),
+ loading = {
+ CircularProgressIndicator()
+ },
+ contentScale = ContentScale.Crop
+)
+
+// Draw the image with a circle crop, crossfade, and overwrite all states.
+AsyncImage(
+ model = ImageRequest.Builder(LocalContext.current)
+ .data("https://example.com/image.jpg")
+ .crossfade(true)
+ .build(),
+ contentDescription = null,
+ modifier = Modifier
+ .clip(CircleShape),
+ contentScale = ContentScale.Crop
+) { state ->
+ if (state is AsyncImagePainter.State.Loading) {
+ CircularProgressIndicator()
+ } else {
+ AsyncImageContent() // Draws the image.
+ }
+}
+ImagePainter to AsyncImagePainter and rememberImagePainter to rememberAsyncImagePainter.ExecuteCallback is no longer supported. To have the AsyncImagePainter skip waiting for onDraw to be called, set ImageRequest.size(OriginalSize) (or any size) instead.FilterQuality argument to rememberAsyncImagePainter.DiskCache and add DiskCache.Builder.cleanupDispatcher.ImageLoader.Builder.placeholder.LocalImageLoader.current with @ReadOnlyComposable to generate more efficient code.compose.foundation instead of compose.ui.androidx.appcompat-resources to 1.4.0.context.resources to load resources for current package. (#968)clear -> dispose replacement expression. (#970)accompanist-drawablepainter to 0.20.2.androidx.annotation to 1.3.0.androidx.core to 1.7.0.androidx.lifecycle to 2.4.0.lifecycle-common-java8 as it's been merged into lifecycle-common.coil-bom artifact which includes a bill of materials.coil-bom allows you to depend on other Coil artifacts without specifying a version.ExecuteCallback.Immediate.Coil 2.0.0 is the next major iteration of the library and has new features, performance improvements, API improvements, and various bug fixes. This release may be binary/source incompatible with future alpha releases until the stable release of 2.0.0.
-Xjvm-default=all.-Xjvm-default=all or -Xjvm-default=all-compatibility to your build file as well. See here for how to do this.ImageSources backed by Files. This avoids unnecessary copying when an Android API requires a File to decode (e.g. MediaMetadataRetriever).ImageLoader.Builder.diskCache and DiskCache.Builder to configure the disk cache.Cache with Coil 2.0 as it can be corrupted if it's interrupted while writing to it.Cache-Control and other cache headers are still supported - except Vary headers, as the cache only checks that the URLs match. Additionally, only responses with a response code in the range [200..300) are cached.ImageLoader.Builder.respectCacheHeaders.ImageRequest's default Scale is now Scale.FITImageRequest.scale consistent with other classes that have a default Scale.ImageViewTarget still have their scale autodetected.Mapper, Fetcher, and Decoder have been refactored to be more flexible.Fetcher.key has been replaced with a new Keyer interface. Keyer creates the cache key from the input data.ImageSource, which allows Decoders to decode Files directly.BitmapPool and PoolableViewTarget have been removed from the library. Bitmap pooling was removed because:Drawable in more places (e.g. Listener, Disposable). Additionally, this means Coil doesn't have to clear ImageViews, which has can cause issues.MemoryCache has been refactored to be more flexible.NullPointerException immediately. If you use Kotlin, there is essentially no change.VideoFrameFileFetcher and VideoFrameUriFetcher are removed from the library. Use VideoFrameDecoder instead, which supports all data sources.bitmapFactoryMaxParallelism, which restricts the maximum number of in-progress BitmapFactory operations. This value is 4 by default, which improves UI performance.interceptorDispatcher, fetcherDispatcher, decoderDispatcher, and transformationDispatcher.Disposable has been refactored and exposes the underlying ImageRequest's job.Transition.transition to be a non-suspending function as it's no longer needed to suspend the transition until it completes.GenericViewTarget, which handles common ViewTarget logic.BlurTransformation and GrayscaleTransformation are removed from the library.ImageRequest.error is now set on the Target if ImageRequest.fallback is null.Transformation.key is replaced with Transformation.cacheKey.ImageRequest.Listener returns SuccessResult/ErrorResult in onSuccess and onError respectively.ByteBuffers to the default supported data types.toString implementations from several classes.ImageResult to ImagePainter.State.Success and ImagePainter.State.Error. (#887)ImagePainter.State.Success and ImagePainter.State.Error, however these APIs are marked as experimental.CrossfadeTransition if View.isShown is true. Previously it would only check View.isVisible. (#898)ComponentRegistry methods public. (#925)accompanist-drawablepainter and remove Coil's custom DrawablePainter implementation. (#845)ImagePainter.ExecuteCallback to stable API. (#927)coil-compose now depends on compose.ui instead of compose.foundation.compose.ui is a smaller dependency as it's a subset of compose.foundation.androidx.exifinterface:exifinterface to 1.3.3.1.0.0. Huge congrats to the Compose team on the stable release!androidx.appcompat:appcompat-resources to 1.3.1.allowConversionToBitmap to enable/disable the automatic bitmap conversion for Transformations. (#775)enforceMinimumFrameDelay to ImageDecoderDecoder and GifDecoder to enable rewriting a GIF's frame delay if it's below a threshold. (#783)ImageLoader's internal network observer. (#741)BitmapFactoryDecoder. (#776)androidx.core:core-ktx to 1.6.0.ImageLoader.Builder.fallback setting the error drawable instead of the fallback drawable.ResourceUriFetcher. (#770)androidx.appcompat:appcompat-resources to 1.3.0.androidx.core:core-ktx to 1.5.0.VideoFrameUriFetcher attempting to handle http/https URIs. (#734SvgDecoder. (#688)SvgDecoder used an SVG's width/height elements to determine its aspect ratio, however this doesn't correctly follow the SVG specification.useViewBoundsAsIntrinsicSize = false when constructing your SvgDecoder.VideoFrameDecoder to support decoding video frames from any source. (#689)ImageLoader.newBuilder(). (#653)ImageLoader instances.AnimatedTransformation. (#659)EmptyBitmapPool implementation if bitmap pooling is disabled. (#638)BitmapPool implementation.MovieDrawable.getOpacity would incorrectly return transparent. (#682)androidx.lifecycle:lifecycle-common-java8 to 2.3.1.ViewSizeResolver.size could throw an IllegalStateException due to resuming a coroutine more than once.HttpFetcher blocking forever if called from the main thread.ImageRequest.dispatcher(Dispatchers.Main.immediate) will fail with a NetworkOnMainThreadException unless ImageRequest.networkCachePolicy is set to CachePolicy.DISABLED or CachePolicy.WRITE_ONLY.VideoFrameFetcher if the video has rotation metadata.androidx.exifinterface:exifinterface (1.3.2).CENTER and MATRIX ImageView scale types to resolve to OriginalSize. (#587)ImageView.setImageResource/ImageView.setImageURI. To revert to the old behaviour set a ViewSizeResolver when constructing your request.ViewSizeResolver if the view's layout param is WRAP_CONTENT. (#562)CrossfadeDrawable. (#585)EventListener.Factory a functional interface. (#575)EventListener. (#574)String overload for ImageRequest.Builder.placeholderMemoryCacheKey.@JvmOverloads to the ViewSizeResolver constructor.CrossfadeDrawable. (#572)kotlin-parcelize plugin.Changes since 0.13.0: - Add Context.imageLoader extension function. (#534) - Add ImageLoader.executeBlocking extension function. (#537) - Don't shutdown previous singleton image loader if replaced. (#533)
Changes since 1.0.0-rc3: - Fix: Guard against missing/invalid ActivityManager. (#541) - Fix: Allow OkHttp to cache unsuccessful responses. (#551) - Update Kotlin to 1.4.10. - Update Okio to 2.9.0. - Update androidx.exifinterface:exifinterface to 1.3.1.
-Xjvm-default=all compiler flag due to instability.Context.imageLoader extension function. (#534)ImageLoader.executeBlocking extension function. (#537)androidx.exifinterface:exifinterface -> 1.3.0stdlib instead of stdlib-jdk8.0.11.0 and below where the memory cache would be checked synchronously on the main thread.0.12.0 where the memory cache is checked on ImageRequest.dispatcher, set ImageLoader.Builder.launchInterceptorChainOnMainThread(false).launchInterceptorChainOnMainThread for more information.ViewTarget in a detached fragment. (#518)ImageRequest.context to load resource URIs. (#517)blockCountLong and blockSizeLong on API 18.ImageLoaderFactory a fun interface.ImageLoader.Builder.addLastModifiedToFileCacheKey which allows you to enable/disable adding the last modified timestamp to the memory cache key for an image loaded from a File.-Xjvm-default=all.-Xjvm-default=all in your build file.LoadRequest and GetRequest have been replaced with ImageRequest:ImageLoader.execute(LoadRequest) -> ImageLoader.enqueue(ImageRequest)ImageLoader.execute(GetRequest) -> ImageLoader.execute(ImageRequest)ImageRequest implements equals/hashCode.coil.request.RequestResult -> coil.request.ImageResultcoil.request.RequestDisposable -> coil.request.Disposablecoil.bitmappool.BitmapPool -> coil.bitmap.BitmapPoolcoil.DefaultRequestOptions -> coil.request.DefaultRequestOptionsSparseIntArraySet has been removed from the public API.TransitionTarget no longer implements ViewTarget.ImageRequest.Listener.onSuccess's signature has changed to return an ImageResult.Metadata instead of just a DataSource.LoadRequest.aliasKeys. This API is better handled with direct read/write access to the memory cache.Interceptors on a background dispatcher.Mappers are now executed on a background dispatcher. As a side effect, automatic bitmap sampling is no longer automatically supported. To achieve the same effect, use the MemoryCache.Key of a previous request as the placeholderMemoryCacheKey of the subsequent request. See here for an example.placeholderMemoryCacheKey API offers more freedom as you can "link" two image requests with different data (e.g. different URLs for small/large images).ImageView extension functions have been moved from the coil.api package to the coil package.import coil.api.load -> import coil.load. Unfortunately, it's not possible to use Kotlin's ReplaceWith functionality to replace imports.MeasuredMapper has been deprecated in favour of the new Interceptor interface. See here for an example of how to convert a MeasuredMapper into an Interceptor.Interceptor is a much less restrictive API that allows for a wider range of custom logic.ImageRequest.data is now not null. If you create an ImageRequest without setting its data it will return NullRequestData as its data.ImageLoader's MemoryCache. See the docs for more information.Interceptors. See the docs for more information. Coil's Interceptor design is heavily inspired by OkHttp's!ImageLoader.Builder.bitmapPoolingEnabled.Bitmap.recycle).androidx.appcompat:appcompat-resources -> 1.2.0androidx.core:core-ktx -> 1.3.1ContentProvider so it doesn't run any code at app startup.SparseIntArraySet.size to a val. (#380)Parameters.count() to an extension function. (#403)BitmapPool.maxSize an Int. (#404)ImageLoader.shutdown() optional (similar to OkHttpClient). (#385)ImageLoaderBuilder.availableMemoryPercentage(0.25) when creating your ImageLoader.SparseIntArraySet.This version deprecates most of the DSL API in favour of using the builders directly. Here's what the change looks like:
// 0.9.5 (old)
+val imageLoader = ImageLoader(context) {
+ bitmapPoolPercentage(0.5)
+ crossfade(true)
+}
+
+val disposable = imageLoader.load(context, "https://example.com/image.jpg") {
+ target(imageView)
+}
+
+val drawable = imageLoader.get("https://example.com/image.jpg") {
+ size(512, 512)
+}
+
+// 0.10.0 (new)
+val imageLoader = ImageLoader.Builder(context)
+ .bitmapPoolPercentage(0.5)
+ .crossfade(true)
+ .build()
+
+val request = LoadRequest.Builder(context)
+ .data("https://example.com/image.jpg")
+ .target(imageView)
+ .build()
+val disposable = imageLoader.execute(request)
+
+val request = GetRequest.Builder(context)
+ .data("https://example.com/image.jpg")
+ .size(512, 512)
+ .build()
+val drawable = imageLoader.execute(request).drawable
+io.coil-kt:coil artifact, you can call Coil.execute(request) to execute the request with the singleton ImageLoader.ImageLoaders now have a weak reference memory cache that tracks weak references to images once they're evicted from the strong reference memory cache.
ImageLoader's memory cache if there's still a strong reference to it.ImageLoaderBuilder.trackWeakReferences.Add a new artifact, io.coil-kt:coil-video, to decode specific frames from a video file. Read more here.
Add a new EventListener API for tracking metrics.
Add ImageLoaderFactory which can be implemented by your Application to simplify singleton initialization.
Coil and ImageLoader extension functions. (#322)RequestResult type from ImageLoader.execute(GetRequest). (#349)ExperimentalCoil to ExperimentalCoilApi. Migrate from @Experimental to @RequiresOptIn. (#306)CoilLogger with Logger interface. (#316)MovieDrawable's constructor params. (#272)Request.Listener's methods now receive the full Request object instead of just its data.GetRequestBuilder now requires a Context in its constructor.Request are now nullable.Request.Listener.onStart() timing to be called immediately after Target.onStart(). (#348)WeakMemoryCache implementation. (#295)coil-video to support decoding video frames. (#122)EventListener. (#314)ImageLoaderFactory. (#311)CachePolicy. (#307)Bitmap.Config. (#342)ImageLoader.invalidate(key) to clear a single memory cache item (#55)error and fallback drawables for get requests.ImageDecoderDecoder crash work-around on Android 11 and above. (#298)ImageView has a matching SizeResolver. (#344)CoilContentProvider. (#293)ImageLoader methods with @MainThread.LifecycleCoroutineDispatcher if the lifecycle is currently started. (#356)OriginalSize.toString().androidx.exifinterface:exifinterface -> 1.2.0androidx.core:core-ktx -> 1.2.0ARGB_8888 bitmap, it would be possible to have a RGBA_F16 bitmap returned to you from the memory cache. Now, the cached config and the requested config must be equal.scale and durationMillis public in CrossfadeDrawable and CrossfadeTransition.ScaleDrawable to ensure it is centered.HttpUrl.get() to background thread.androidx.lifecycle:lifecycle-common-java8 -> 2.2.0BitmapPool.trimMemory public.LoadRequestBuilder.crossfade(false).Transformation.transform now includes a Size parameter. This is to support transformations that change the size of the output Bitmap based on the size of the Target. Requests with transformations are now also exempt from image sampling.Transformations are now applied to any type of Drawable. Before, Transformations would be skipped if the input Drawable was not a BitmapDrawable. Now, Drawables are rendered to a Bitmap before applying the Transformations.null data to ImageLoader.load is now treated as an error and calls Target.onError and Request.Listener.onError with a NullRequestDataException. This change was made to support setting a fallback drawable if data is null. Previously the request was silently ignored.RequestDisposable.isDisposed is now a val.RequestDisposable.await to support suspending while a LoadRequest is in progress.fallback drawable when request data is null.Precision. This makes the size of the output Drawable exact while enabling scaling optimizations for targets that support scaling (e.g. ImageViewTarget). See its documentation for more information.RequestBuilder.aliasKeys to support matching multiple cache keys.RoundedCornersTransformation now crops to the size of the target then rounds the corners.CircleCropTransformation now crops from the center.Scale.FIT.MovieDrawable not scaling properly.androidx.exifinterface:exifinterface -> 1.1.0SvgDrawable has been removed. Instead, SVGs are now prerendered to BitmapDrawables by SvgDecoder. This makes SVGs significantly less expensive to render on the main thread. Also SvgDecoder now requires a Context in its constructor.SparseIntArraySet extension functions have moved to the coil.extension package.Parameters API to support passing custom data through the image pipeline.ImageView.clear() to support proactively freeing resources.subtractPadding attribute to ViewSizeResolver to enable/disable subtracting a view's padding when measuring.RequestBuilder<*>.repeatCount to set the repeat count for a GIF.@MainThread.appcompat-resources from compileOnly to implementation for coil-base.ImageLoaderBuilder.okHttpClient(OkHttpClient.Builder.() -> Unit) is now ImageLoaderBuilder.okHttpClient(() -> OkHttpClient). The initializer is also now called lazily on a background thread. If you set a custom OkHttpClient you must set OkHttpClient.cache to enable disk caching. If you don't set a custom OkHttpClient, Coil will create the default OkHttpClient which has disk caching enabled. The default Coil cache can be created using CoilUtils.createDefaultCache(context). e.g.:val imageLoader = ImageLoader(context) {
+ okHttpClient {
+ OkHttpClient.Builder()
+ .cache(CoilUtils.createDefaultCache(context))
+ .build()
+ }
+}
+Fetcher.key no longer has a default implementation.Mapper would be called. Now, all applicable Mappers will be called. No API changes.url -> uri, factory -> initializer.coil-svg artifact, which has an SvgDecoder that supports automatically decoding SVGs. Powered by AndroidSVG. Thanks @rharter.load(String) and get(String) now accept any of the supported Uri schemes. e.g. You can now do imageView.load("file:///path/to/file.jpg").Call.Factory instead of OkHttpClient. This allows lazy initialization of the networking resources using ImageLoaderBuilder.okHttpClient { OkHttpClient() }. Thanks @ZacSweers.RequestBuilder.decoder to explicitly set the decoder for a request.ImageLoaderBuilder.allowHardware to enable/disable hardware bitmaps by default for an ImageLoader.androidx.appcompat:appcompat -> 1.1.0androidx.core:core-ktx -> 1.1.0androidx.lifecycle:lifecycle-common-java8 -> 2.1.0appcompat with appcompat-resources as an optional compileOnly dependency. appcompat-resources is a much smaller artifact.transformations(List<Transformation>) to RequestBuilder.