diff --git a/README.md b/README.md
index dcea9d5..b3ec78f 100644
--- a/README.md
+++ b/README.md
@@ -16,6 +16,9 @@
 
 <br />
 
+## What have I changed? -- By PoulDev
+I added some commands to move the mouse pointer and clicking with it, I've also added some customer control commands like increasing the audio volume and more.
+
 ## Quick Start Guide
 Install and have your USB Rubber Ducky working in less than 5 minutes.
 
diff --git a/code.py b/code.py
index 3d47f85..b879aed 100644
--- a/code.py
+++ b/code.py
@@ -8,7 +8,6 @@
 
 
 import time
-import digitalio
 from board import *
 import board
 from duckyinpython import *
@@ -21,8 +20,6 @@
 time.sleep(.5)
 
 def startWiFi():
-    import ipaddress
-    # Get wifi details and more from a secrets.py file
     try:
         from secrets import secrets
     except ImportError:
@@ -41,13 +38,6 @@ def startWiFi():
 #supervisor.disable_autoreload()
 supervisor.runtime.autoreload = False
 
-if(board.board_id == 'raspberry_pi_pico'):
-    led = pwmio.PWMOut(board.LED, frequency=5000, duty_cycle=0)
-elif(board.board_id == 'raspberry_pi_pico_w'):
-    led = digitalio.DigitalInOut(board.LED)
-    led.switch_to_output()
-
-
 progStatus = False
 progStatus = getProgrammingStatus()
 print("progStatus", progStatus)
@@ -69,14 +59,14 @@ async def main_loop():
 
     button_task = asyncio.create_task(monitor_buttons(button1))
     if(board.board_id == 'raspberry_pi_pico_w'):
-        pico_led_task = asyncio.create_task(blink_pico_w_led(led))
+        pico_led_task = asyncio.create_task(blink_pico_w_led())
         print("Starting Wifi")
         startWiFi()
         print("Starting Web Service")
         webservice_task = asyncio.create_task(startWebService())
         await asyncio.gather(pico_led_task, button_task, webservice_task)
     else:
-        pico_led_task = asyncio.create_task(blink_pico_led(led))
+        pico_led_task = asyncio.create_task(blink_pico_led())
         await asyncio.gather(pico_led_task, button_task)
 
 asyncio.run(main_loop())
diff --git a/duckyinpython.py b/duckyinpython.py
index a0a6087..d1d32e4 100644
--- a/duckyinpython.py
+++ b/duckyinpython.py
@@ -11,8 +11,12 @@
 from board import *
 import pwmio
 import asyncio
+
 import usb_hid
 from adafruit_hid.keyboard import Keyboard
+from adafruit_hid.mouse import Mouse
+from adafruit_hid.consumer_control import ConsumerControl
+from adafruit_hid.consumer_control_code import ConsumerControlCode
 
 # comment out these lines for non_US keyboards
 from adafruit_hid.keyboard_layout_us import KeyboardLayoutUS as KeyboardLayout
@@ -47,6 +51,36 @@
     'F12': Keycode.F12,
 
 }
+
+kbd = Keyboard(usb_hid.devices)
+layout = KeyboardLayout(kbd)
+
+mouse = Mouse(usb_hid.devices)
+cc = ConsumerControl(usb_hid.devices)
+
+#init button
+button1_pin = DigitalInOut(GP22) # defaults to input
+button1_pin.pull = Pull.UP      # turn on internal pull-up resistor
+button1 =  Debouncer(button1_pin)
+
+#init payload selection switch
+payload1Pin = digitalio.DigitalInOut(GP4)
+payload1Pin.switch_to_input(pull=digitalio.Pull.UP)
+payload2Pin = digitalio.DigitalInOut(GP5)
+payload2Pin.switch_to_input(pull=digitalio.Pull.UP)
+payload3Pin = digitalio.DigitalInOut(GP10)
+payload3Pin.switch_to_input(pull=digitalio.Pull.UP)
+payload4Pin = digitalio.DigitalInOut(GP11)
+payload4Pin.switch_to_input(pull=digitalio.Pull.UP)
+
+defaultDelay = 0
+
+if(board.board_id == 'raspberry_pi_pico'):
+    led = pwmio.PWMOut(board.LED, frequency=5000, duty_cycle=0)
+elif(board.board_id == 'raspberry_pi_pico_w'):
+    led = digitalio.DigitalInOut(board.LED)
+    led.switch_to_output()
+
 def convertLine(line):
     newline = []
     # print(line)
@@ -75,53 +109,78 @@ def runScriptLine(line):
 def sendString(line):
     layout.write(line)
 
+def parseMouseCommand(line):
+    if line.startswith('CLICK'):
+        if line[6:] == 'LEFT':
+            mouse.click(Mouse.LEFT_BUTTON)
+        elif line[6:] == 'RIGHT':
+            mouse.click(Mouse.RIGHT_BUTTON)
+        elif hasattr(Mouse, line[6:]):
+            mouse.click(getattr(Mouse, line[6:]))
+
+    elif line.startswith('MOVE'):
+        x, y = line[5:].split(',')
+        x, y = int(x), int(y)
+
+        mouse.move(x, y)
+    elif line.startswith('WHEEL'):
+        wheel = int(line[5:])
+        mouse.move(wheel=wheel)
+
+    elif line.startswith('PRESS'):
+        if line[6:] == 'LEFT':
+            mouse.press(Mouse.LEFT_BUTTON)
+        elif line[6:] == 'RIGHT':
+            mouse.press(Mouse.RIGHT_BUTTON)
+        elif hasattr(Mouse, line[6:]):
+            mouse.press(getattr(Mouse, line[6:]))
+
+    elif line.startswith('RELEASE'):
+        if line[8:] == 'LEFT':
+            mouse.release(Mouse.LEFT_BUTTON)
+        elif line[8:] == 'RIGHT':
+            mouse.release(Mouse.RIGHT_BUTTON)
+        elif hasattr(Mouse, line[8:]):
+            mouse.release(getattr(Mouse, line[8:]))
+
 def parseLine(line):
     global defaultDelay
-    if(line[0:3] == "REM"):
-        # ignore ducky script comments
-        pass
-    elif(line[0:5] == "DELAY"):
+    
+    if line.startswith("REM"):
+        pass # ignore ducky script comment
+
+    elif line.startswith("DELAY"):
         time.sleep(float(line[6:])/1000)
-    elif(line[0:6] == "STRING"):
+    
+    elif line.startswith("STRING"):
         sendString(line[7:])
-    elif(line[0:5] == "PRINT"):
+    
+    elif line.startswith("MOUSE"):
+        parseMouseCommand(line[6:])
+    
+    elif line.startswith("CC"):
+        CC_KEY = line[3:]
+        if hasattr(ConsumerControlCode, CC_KEY):
+            cc.send(getattr(ConsumerControlCode, CC_KEY))
+
+    elif line.startswith("PRINT"):
         print("[SCRIPT]: " + line[6:])
-    elif(line[0:6] == "IMPORT"):
+
+    elif line.startswith("IMPORT"):
         runScript(line[7:])
-    elif(line[0:13] == "DEFAULT_DELAY"):
-        defaultDelay = int(line[14:]) * 10
-    elif(line[0:12] == "DEFAULTDELAY"):
-        defaultDelay = int(line[13:]) * 10
-    elif(line[0:3] == "LED"):
-        if(led.value == True):
-            led.value = False
-        else:
-            led.value = True
+    
+    elif line.startswith("DEFAULT_DELAY"):
+        defaultDelay = int(line[14:])
+    
+    elif line.startswith("DEFAULTDELAY"):
+        defaultDelay = int(line[13:])
+
+    elif line.startswith("LED"):
+        led.value = not led.value
     else:
         newScriptLine = convertLine(line)
         runScriptLine(newScriptLine)
 
-kbd = Keyboard(usb_hid.devices)
-layout = KeyboardLayout(kbd)
-
-
-
-
-#init button
-button1_pin = DigitalInOut(GP22) # defaults to input
-button1_pin.pull = Pull.UP      # turn on internal pull-up resistor
-button1 =  Debouncer(button1_pin)
-
-#init payload selection switch
-payload1Pin = digitalio.DigitalInOut(GP4)
-payload1Pin.switch_to_input(pull=digitalio.Pull.UP)
-payload2Pin = digitalio.DigitalInOut(GP5)
-payload2Pin.switch_to_input(pull=digitalio.Pull.UP)
-payload3Pin = digitalio.DigitalInOut(GP10)
-payload3Pin.switch_to_input(pull=digitalio.Pull.UP)
-payload4Pin = digitalio.DigitalInOut(GP11)
-payload4Pin.switch_to_input(pull=digitalio.Pull.UP)
-
 def getProgrammingStatus():
     # check GP0 for setup mode
     # see setup mode for instructions
@@ -130,9 +189,6 @@ def getProgrammingStatus():
     progStatus = not progStatusPin.value
     return(progStatus)
 
-
-defaultDelay = 0
-
 def runScript(file):
     global defaultDelay
 
@@ -167,16 +223,16 @@ def selectPayload():
     payload3State = not payload3Pin.value
     payload4State = not payload4Pin.value
 
-    if(payload1State == True):
+    if payload1State:
         payload = "payload.dd"
 
-    elif(payload2State == True):
+    elif payload2State:
         payload = "payload2.dd"
 
-    elif(payload3State == True):
+    elif payload3State:
         payload = "payload3.dd"
 
-    elif(payload4State == True):
+    elif payload4State:
         payload = "payload4.dd"
 
     else:
@@ -186,14 +242,7 @@ def selectPayload():
 
     return payload
 
-async def blink_led(led):
-    print("Blink")
-    if(board.board_id == 'raspberry_pi_pico'):
-        blink_pico_led(led)
-    elif(board.board_id == 'raspberry_pi_pico_w'):
-        blink_pico_w_led(led)
-
-async def blink_pico_led(led):
+async def blink_pico_led():
     print("starting blink_pico_led")
     led_state = False
     while True:
@@ -217,7 +266,7 @@ async def blink_pico_led(led):
             led_state = True
         await asyncio.sleep(0)
 
-async def blink_pico_w_led(led):
+async def blink_pico_w_led():
     print("starting blink_pico_w_led")
     led_state = False
     while True:
diff --git a/examples/consumerControl/README.md b/examples/consumerControl/README.md
new file mode 100644
index 0000000..d27ab24
--- /dev/null
+++ b/examples/consumerControl/README.md
@@ -0,0 +1,16 @@
+# Consumer Control
+Simulate a Consumer Control Device from the Raspberry Pi Pico
+
+## Avaible Commands:
+```
+CC [ConsumerControlCode]
+```
+Every ConsumerControlCode can be found [here](https://docs.circuitpython.org/projects/hid/en/latest/api.html#adafruit_hid.consumer_control_code.ConsumerControlCode)
+
+## Examples:
+```
+CC BRIGHTNESS_INCREMENT
+CC PLAY_PAUSE
+CC MUTE
+CC EJECT
+```
diff --git a/examples/consumerControl/brightness.dd b/examples/consumerControl/brightness.dd
new file mode 100644
index 0000000..1979a43
--- /dev/null
+++ b/examples/consumerControl/brightness.dd
@@ -0,0 +1,14 @@
+REM Make the monitor as dark as possible while the
+REM payload is running, then set it to maximum brightness.
+
+REM The system needs a bit of time to adjust the brightness
+DEFAULT_DELAY 200
+
+CC BRIGHTNESS_DECREMENT
+REPEAT 9
+
+REM Payload Script Here
+DELAY 2000
+
+CC BRIGHTNESS_INCREMENT
+REPEAT 9
diff --git a/examples/consumerControl/volume.dd b/examples/consumerControl/volume.dd
new file mode 100644
index 0000000..aa9e72e
--- /dev/null
+++ b/examples/consumerControl/volume.dd
@@ -0,0 +1,6 @@
+REM Max out the volume
+REM Every time you press the button, the volume increases by 2,
+REM so to make sure the volume is at its maximum, you need to press it 50 times.
+
+CC VOLUME_INCREMENT
+REPEAT 49
diff --git a/examples/mouse/README.md b/examples/mouse/README.md
new file mode 100644
index 0000000..7ada175
--- /dev/null
+++ b/examples/mouse/README.md
@@ -0,0 +1,21 @@
+# Mouse
+Simulate a Mouse from the Raspberry Pi Pico
+
+## Avaible Commands:
+```
+MOUSE CLICK LEFT/RIGHT
+MOUSE MOVE x,y
+MOUSE WHEEL x
+MOUSE PRESS LEFT/RIGHT
+MOUSE RELEASE LEFT/RIGHT
+```
+
+## Examples:
+```
+MOUSE CLICK LEFT
+MOUSE MOVE 200,-100
+MOUSE WHEEL 50
+MOUSE WHEEL -50
+MOUSE PRESS LEFT 
+MOUSE RELEASE LEFT
+```
diff --git a/examples/mouse/click_and_movements.dd b/examples/mouse/click_and_movements.dd
new file mode 100644
index 0000000..7a1c840
--- /dev/null
+++ b/examples/mouse/click_and_movements.dd
@@ -0,0 +1,8 @@
+REM Test mouse click and movement
+
+MOUSE CLICK RIGHT
+DELAY 500
+MOUSE CLICK LEFT
+MOUSE WHEEL 10
+DELAY 200
+MOUSE WHEEL -10
diff --git a/examples/mouse/hide_window.dd b/examples/mouse/hide_window.dd
new file mode 100644
index 0000000..e69febf
--- /dev/null
+++ b/examples/mouse/hide_window.dd
@@ -0,0 +1,14 @@
+REM Open the CMD and move it to the bottom of the screen
+GUI r
+DELAY 500
+STRING cmd
+ENTER
+DELAY 1000
+ALT SPACE
+DELAY 100
+STRING s
+DELAY 100
+DOWNARROW
+DELAY 100
+MOUSE MOVE 0,1500
+ENTER
\ No newline at end of file
diff --git a/examples/mouse/select_text.dd b/examples/mouse/select_text.dd
new file mode 100644
index 0000000..6902e06
--- /dev/null
+++ b/examples/mouse/select_text.dd
@@ -0,0 +1,6 @@
+REM Select something on the screen
+
+MOUSE PRESS LEFT
+MOUSE MOVE 100,100
+MOUSE RELEASE LEFT
+
diff --git a/payload.dd b/payload.dd
index 5f21333..1b6f53f 100644
--- a/payload.dd
+++ b/payload.dd
@@ -1,6 +1,8 @@
 REM The next four lines open Notepad in Windows and type "Hello World!"
+
 GUI r
+DELAY 400
 STRING notepad
 ENTER
-DELAY 250
-STRING Hello World!
\ No newline at end of file
+DELAY 400
+STRING Hello World!