diff --git a/.gitignore b/.gitignore
index 7103328..133dca0 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1 +1,2 @@
 *.cfg
+config.cfg
diff --git a/InverterData.py b/InverterData.py
index 244f620..bc7ee49 100644
--- a/InverterData.py
+++ b/InverterData.py
@@ -16,7 +16,8 @@ def twosComplement_hex(hexval):
         val -= 1 << bits
     return val
 
-os.chdir(os.path.dirname(sys.argv[0]))
+# os.chdir(os.path.dirname(sys.argv[0]))
+os.chdir(os.getcwd())
 # CONFIG
 
 configParser = configparser.RawConfigParser()
@@ -39,122 +40,127 @@ def twosComplement_hex(hexval):
 
 
 # PREPARE & SEND DATA TO THE INVERTER
-output="{" # initialise json output
-pini=59
-pfin=112
-chunks=0
-while chunks<2:
- if chunks==-1: # testing initialisation
-  pini=235
-  pfin=235
-  print("Initialise Connection")
- start = binascii.unhexlify('A5') #start
- length=binascii.unhexlify('1700') # datalength
- controlcode= binascii.unhexlify('1045') #controlCode
- serial=binascii.unhexlify('0000') # serial
- datafield = binascii.unhexlify('020000000000000000000000000000') #com.igen.localmode.dy.instruction.send.SendDataField
- pos_ini=str(hex(pini)[2:4].zfill(4))
- pos_fin=str(hex(pfin-pini+1)[2:4].zfill(4))
- businessfield= binascii.unhexlify('0103' + pos_ini + pos_fin) # sin CRC16MODBUS
- crc=binascii.unhexlify(str(hex(libscrc.modbus(businessfield))[4:6])+str(hex(libscrc.modbus(businessfield))[2:4])) # CRC16modbus
- checksum=binascii.unhexlify('00') #checksum F2
- endCode = binascii.unhexlify('15')
- 
- inverter_sn2 = bytearray.fromhex(hex(inverter_sn)[8:10] + hex(inverter_sn)[6:8] + hex(inverter_sn)[4:6] + hex(inverter_sn)[2:4])
- frame = bytearray(start + length + controlcode + serial + inverter_sn2 + datafield + businessfield + crc + checksum + endCode)
- 
- checksum = 0
- frame_bytes = bytearray(frame)
- for i in range(1, len(frame_bytes) - 2, 1):
-     checksum += frame_bytes[i] & 255
- frame_bytes[len(frame_bytes) - 2] = int((checksum & 255))
- 
- # OPEN SOCKET
- 
- for res in socket.getaddrinfo(inverter_ip, inverter_port, socket.AF_INET,
-                                            socket.SOCK_STREAM):
-                  family, socktype, proto, canonname, sockadress = res
-                  try:
-                   clientSocket= socket.socket(family,socktype,proto);
-                   clientSocket.settimeout(10);
-                   clientSocket.connect(sockadress);
-                  except socket.error as msg:
-                   print("Could not open socket");
-                   break
- 
- # SEND DATA
- #print(chunks)
- clientSocket.sendall(frame_bytes);
- 
- ok=False;
- while (not ok):
-  try:
-   data = clientSocket.recv(1024);
-   ok=True
-   try:
-    data
-   except:
-    print("No data - Die")
-    sys.exit(1) #die, no data
-  except socket.timeout as msg:
-   print("Connection timeout");
-   sys.exit(1) #die
- 
- # PARSE RESPONSE (start position 56, end position 60)
- totalpower=0 
- i=pfin-pini
- a=0
- while a<=i:
-  p1=56+(a*4)
-  p2=60+(a*4)
-  response=twosComplement_hex(str(''.join(hex(ord(chr(x)))[2:].zfill(2) for x in bytearray(data))+'  '+re.sub('[^\x20-\x7f]', '', ''))[p1:p2])
-  hexpos=str("0x") + str(hex(a+pini)[2:].zfill(4)).upper()
-  with open("./DYRealTime.txt") as txtfile:
-   parameters=json.loads(txtfile.read())
-  for parameter in parameters:
-   for item in parameter["items"]:
-     title=item["titleEN"]
-     ratio=item["ratio"]
-     unit=item["unit"]
-     for register in item["registers"]:
-      if register==hexpos and chunks!=-1:
-       #print(hexpos+"-"+title+":"+str(response*ratio)+unit)
-       if title.find("Temperature")!=-1: 
-        response=round(response*ratio-100,2)
-       else: 	
-        response=round(response*ratio,2)
-       output=output+"\""+ title + "(" + unit + ")" + "\":" + str(response)+","
-       if hexpos=='0x00BA': totalpower+=response*ratio;
-       if hexpos=='0x00BB': totalpower+=response*ratio; 
-  a+=1
- pini=150
- pfin=195
- chunks+=1  
-output=output[:-1]+"}"
-if totalpower<installed_power+1000:
- if mqtt==1:
-  # Initialise MQTT if configured
-  client=paho.Client("inverter")
-  if mqtt_username!="":
-   client.tls_set()  # <--- even without arguments
-   client.username_pw_set(username=mqtt_username, password=mqtt_passwd)
-  client.connect(mqtt_server, mqtt_port)
-  client.publish(mqtt_topic,totalpower)
-  client.publish(mqtt_topic+"/attributes",output)
-  print("Ok")
- else:
-  print(output)
-else:
-  #open text file
-  text_file = open("picos_potencia.txt", "a")
+output = "{"  # initialise json output
+pini = 59
+pfin = 112
+chunks = 0
+while chunks < 2:
+    if chunks == -1:  # testing initialisation
+        pini = 235
+        pfin = 235
+        print("Initialise Connection")
+
+    start = binascii.unhexlify('A5')  # start
+    length = binascii.unhexlify('1700')  # datalength
+    controlcode = binascii.unhexlify('1045')  # controlCode
+    serial = binascii.unhexlify('0000')  # serial
+    datafield = binascii.unhexlify('020000000000000000000000000000')  # com.igen.localmode.dy.instruction.send.SendDataField
+    pos_ini = str(hex(pini)[2:4].zfill(4))
+    pos_fin = str(hex(pfin - pini + 1)[2:4].zfill(4))
+    businessfield = binascii.unhexlify('0103' + pos_ini + pos_fin)  # sin CRC16MODBUS
+    crc = binascii.unhexlify(str(hex(libscrc.modbus(businessfield))[4:6]) + str(hex(libscrc.modbus(businessfield))[2:4]))  # CRC16modbus
+    checksum = binascii.unhexlify('00')  # checksum F2
+    endCode = binascii.unhexlify('15')
+    inverter_sn2 = bytearray.fromhex(hex(inverter_sn)[8:10] + hex(inverter_sn)[6:8] + hex(inverter_sn)[4:6] + hex(inverter_sn)[2:4])
+    frame = bytearray(start + length + controlcode + serial + inverter_sn2 + datafield + businessfield + crc + checksum + endCode)
+
+    checksum = 0
+    frame_bytes = bytearray(frame)
+    for i in range(1, len(frame_bytes) - 2, 1):
+        checksum += frame_bytes[i] & 255
+    frame_bytes[len(frame_bytes) - 2] = int((checksum & 255))
 
-  #write string to file
-  text_file.write(datetime.datetime.now().strftime('%d/%m/%y %I:%M %S %p')+'\n')
-  text_file.write(output+'\n'+'\n')
+    # OPEN SOCKET
+    for res in socket.getaddrinfo(inverter_ip, inverter_port, socket.AF_INET, socket.SOCK_STREAM):
+        family, socktype, proto, canonname, sockadress = res
+        try:
+            clientSocket = socket.socket(family, socktype, proto)
+            clientSocket.settimeout(10)
+            clientSocket.connect(sockadress)
+        except socket.error as msg:
+            print("Could not open socket")
+            break
 
-  #close file
-  text_file.close()
+    # SEND DATA
+    # print(chunks)
+    clientSocket.sendall(frame_bytes)
 
+    ok = False
+    while (not ok):
+        try:
+            data = clientSocket.recv(1024)
+            ok = True
+            try:
+                data
+            except:
+                print("No data - Die")
+                sys.exit(1)  # die, no data
+        except socket.timeout as msg:
+            print("Connection timeout")
+            sys.exit(1)  # die
 
+    # PARSE RESPONSE (start position 56, end position 60)
+    totalpower = 0
+    i = pfin - pini
+    a = 0
+    while a <= i:
+        p1 = 56 + (a * 4)
+        p2 = 60 + (a * 4)
+        response = twosComplement_hex(str(''.join(hex(ord(chr(x)))[2:].zfill(2) for x in bytearray(data)) + '  ' + re.sub('[^\x20-\x7f]', '', ''))[p1:p2])
+        hexpos = str("0x") + str(hex(a + pini)[2:].zfill(4)).upper()
+        with open("./DYRealTime.txt") as txtfile:
+            parameters = json.loads(txtfile.read())
+        for parameter in parameters:
+            for item in parameter["items"]:
+                title = item["titleEN"]
+                ratio = item["ratio"]
+                unit = item["unit"]
+                for register in item["registers"]:
+                    if register == hexpos and chunks != -1:
+                        # print(hexpos+"-"+title+":"+str(response*ratio)+unit)
+                        if title.find("Temperature") != -1:
+                            response = round(response * ratio - 100, 2)
+                        else:
+                            response = round(response * ratio, 2)
+                        
+                        # Change battery Soc unit to percentage so python doesnt use the modulus operator
+                        if unit == '%':
+                            unit = 'perc'
+                        
+                        # output = output + "\"" + title + "(" + unit + ")" + "\":" + str(response) + ","
+                        output=output+"\""+ title + "_" + unit + "\":" + str(response)+","
+
+                        if hexpos == '0x00BA':
+                            totalpower += response * ratio
+                        if hexpos == '0x00BB':
+                            totalpower += response * ratio
+        a += 1
+    pini = 150
+    pfin = 195
+    chunks += 1
+
+output = output[:-1] + "}"
+if totalpower < installed_power + 1000:
+    if mqtt == 1:
+        # Initialise MQTT if configured
+        client = paho.Client("inverter")
+        if mqtt_username != "":
+            client.tls_set()  # <--- even without arguments
+            client.username_pw_set(username=mqtt_username, password=mqtt_passwd)
+        client.connect(mqtt_server, mqtt_port)
+        client.publish(mqtt_topic, totalpower)
+        client.publish(mqtt_topic + "/attributes", output)
+        print(f"MQTT Topic:{mqtt_topic}'/attributes' Output:{output}")
+        print("Ok")
+    else:
+        print(output)
+else:
+    # open text file
+    text_file = open("picos_potencia.txt", "a")
 
+    # write string to file
+    text_file.write(datetime.datetime.now().strftime('%d/%m/%y %I:%M %S %p') + '\n')
+    text_file.write(output + '\n' + '\n')
 
+    # close file
+    text_file.close()
diff --git a/deye_logger/DOCS.md b/deye_logger/DOCS.md
index edeef78..d21e9e8 100755
--- a/deye_logger/DOCS.md
+++ b/deye_logger/DOCS.md
@@ -7,6 +7,7 @@ The Solarman Wifi Logger must be reachable via an ip address on the network wher
 Using the Home Assistant Mosquitto broker add-on as the mqtt destination works really well. I have been using add-on on my Raspberry Pi v4 Home Assistant setup without issues for about a month now.
 
 This add-on is possible thanks to the work of @jlopez77 https://github.com/jlopez77/DeyeInverter
+And Modded according, added Battery SOC %
 
 ## Solarman Wifi Logger ##
 
@@ -47,9 +48,10 @@ Ensure you configure the add-on before starting it. Setting the mqtt flag to fal
 
 Ensure you create the required mqtt sensors in the homeassistant configuration.yaml to interpret the stats received on the /sunsynk mqtt topic.
 
+    # Solar Inverter sensors setup and all mqtt platforms
     sensor:
       - platform: mqtt
-        name: "solarpower"
+        name: "Solarpower"
         state_topic: "/sunsynk"
         unit_of_measurement: "W"
         json_attributes_topic: "/sunsynk/attributes"
@@ -57,7 +59,7 @@ Ensure you create the required mqtt sensors in the homeassistant configuration.y
         state_class: measurement
 
       - platform: mqtt
-        name: "solar_daily_energy_bought_kwh"
+        name: "Solar Daily Energy Bought KWH"
         state_topic: "/sunsynk/attributes"
         unit_of_measurement: "kWh"
         value_template: "{{ value_json.daily_energy_bought_kwh }}"
@@ -65,7 +67,7 @@ Ensure you create the required mqtt sensors in the homeassistant configuration.y
         state_class: total_increasing
 
       - platform: mqtt
-        name: "solar_daily_energy_sold_kwh"
+        name: "Solar Daily Energy Sold KWH"
         state_topic: "/sunsynk/attributes"
         unit_of_measurement: "kWh"
         value_template: "{{ value_json.daily_energy_sold_kwh }}"
@@ -73,13 +75,21 @@ Ensure you create the required mqtt sensors in the homeassistant configuration.y
         state_class: total_increasing
 
       - platform: mqtt
-        name: "solar_daily_production_KWH"
+        name: "Solar Daily Production KWH"
         state_topic: "/sunsynk/attributes"
         unit_of_measurement: "kWh"
         value_template: "{{ value_json.daily_production_KWH }}"
         device_class: energy
         state_class: total_increasing
 
+      - platform: mqtt
+        name: "Solar Battery SOC"
+        state_topic: "/sunsynk/attributes"
+        unit_of_measurement: "%"
+        value_template: "{{ value_json.battery_soc_soc }}"
+        device_class: energy
+        state_class: measurement
+
 Once these sensors are added to the Home assistant configuration you can use them in the Energy Dashboard to monotor energy usage.
 
 [//]: # "![Home Assistant Energy Config](images/energy_config.png)"
diff --git a/deye_logger/Dockerfile b/deye_logger/Dockerfile
index 882e724..b104754 100755
--- a/deye_logger/Dockerfile
+++ b/deye_logger/Dockerfile
@@ -17,7 +17,6 @@ RUN \
         libc6-compat \
         git \
         py3-pip && \
-        
         # Install requirements for add-on
         pip3 install --no-cache-dir wheel && \
         pip3 install --no-cache-dir paho-mqtt && \
diff --git a/deye_logger/InverterData.py b/deye_logger/InverterData.py
index 878322c..64fe6d1 100755
--- a/deye_logger/InverterData.py
+++ b/deye_logger/InverterData.py
@@ -7,134 +7,141 @@
 import paho.mqtt.client as paho
 import os
 
+
 def twosComplement_hex(hexval):
     bits = 16
     val = int(hexval, bits)
-    if val & (1 << (bits-1)):
+    if val & (1 << (bits - 1)):
         val -= 1 << bits
     return val
 
-#os.chdir(os.path.dirname(sys.argv[0]))
+
+# os.chdir(os.path.dirname(sys.argv[0]))
 # CONFIG
 
 with open('data/options.json', 'r') as f:
     config = json.load(f)
 
-inverter_ip=config['inverter_ip']
-inverter_port=int(config['inverter_port'])
-inverter_sn=int(config['inverter_sn'])
-mqtt=bool(config['mqtt'])
-mqtt_server=config['mqtt_server']
-mqtt_port=int(config['mqtt_port'])
-mqtt_topic=config['mqtt_topic']
-mqtt_username=config['mqtt_username']
-mqtt_passwd=config['mqtt_passwd']
+inverter_ip = config['inverter_ip']
+inverter_port = int(config['inverter_port'])
+inverter_sn = int(config['inverter_sn'])
+mqtt = bool(config['mqtt'])
+mqtt_server = config['mqtt_server']
+mqtt_port = int(config['mqtt_port'])
+mqtt_topic = config['mqtt_topic']
+mqtt_username = config['mqtt_username']
+mqtt_passwd = config['mqtt_passwd']
 
 # END CONFIG
 
 
 # PREPARE & SEND DATA TO THE INVERTER
-output="{" # initialise json output
-pini=59
-pfin=112
-chunks=0
-while chunks<2:
- if chunks==-1: # testing initialisation
-  pini=235
-  pfin=235
-  print("Initialise Connection")
- start = binascii.unhexlify('A5') #start
- length=binascii.unhexlify('1700') # datalength
- controlcode= binascii.unhexlify('1045') #controlCode
- serial=binascii.unhexlify('0000') # serial
- datafield = binascii.unhexlify('020000000000000000000000000000') #com.igen.localmode.dy.instruction.send.SendDataField
- pos_ini=str(hex(pini)[2:4].zfill(4))
- pos_fin=str(hex(pfin-pini+1)[2:4].zfill(4))
- businessfield= binascii.unhexlify('0103' + pos_ini + pos_fin) # sin CRC16MODBUS
- crc=binascii.unhexlify(str(hex(libscrc.modbus(businessfield))[4:6])+str(hex(libscrc.modbus(businessfield))[2:4])) # CRC16modbus
- checksum=binascii.unhexlify('00') #checksum F2
- endCode = binascii.unhexlify('15')
- 
- inverter_sn2 = bytearray.fromhex(hex(inverter_sn)[8:10] + hex(inverter_sn)[6:8] + hex(inverter_sn)[4:6] + hex(inverter_sn)[2:4])
- frame = bytearray(start + length + controlcode + serial + inverter_sn2 + datafield + businessfield + crc + checksum + endCode)
- 
- checksum = 0
- frame_bytes = bytearray(frame)
- for i in range(1, len(frame_bytes) - 2, 1):
-     checksum += frame_bytes[i] & 255
- frame_bytes[len(frame_bytes) - 2] = int((checksum & 255))
- 
- # OPEN SOCKET
- 
- for res in socket.getaddrinfo(inverter_ip, inverter_port, socket.AF_INET,
-                                            socket.SOCK_STREAM):
-                  family, socktype, proto, canonname, sockadress = res
-                  try:
-                   clientSocket= socket.socket(family,socktype,proto);
-                   clientSocket.settimeout(10);
-                   clientSocket.connect(sockadress);
-                  except socket.error as msg:
-                   print("Could not open socket");
-                   break
- 
- # SEND DATA
- #print(chunks)
- clientSocket.sendall(frame_bytes);
- 
- ok=False;
- while (not ok):
-  try:
-   data = clientSocket.recv(1024);
-   ok=True
-   try:
-    data
-   except:
-    print("No data - Die")
-    sys.exit(1) #die, no data
-  except socket.timeout as msg:
-   print("Connection timeout");
-   sys.exit(1) #die
- 
- # PARSE RESPONSE (start position 56, end position 60)
- totalpower=0 
- i=pfin-pini
- a=0
- while a<=i:
-  p1=56+(a*4)
-  p2=60+(a*4)
-  response=twosComplement_hex(str(''.join(hex(ord(chr(x)))[2:].zfill(2) for x in bytearray(data))+'  '+re.sub('[^\x20-\x7f]', '', ''))[p1:p2])
-  hexpos=str("0x") + str(hex(a+pini)[2:].zfill(4)).upper()
-  with open("./DYRealTime.txt") as txtfile:
-   parameters=json.loads(txtfile.read())
-  for parameter in parameters:
-   for item in parameter["items"]:
-     title=item["titleHA"]
-     ratio=item["ratio"]
-     unit=item["unit"]
-     for register in item["registers"]:
-      if register==hexpos and chunks!=-1:
-       #print(hexpos+"-"+title+":"+str(response*ratio)+unit)
-       if title.find("Temperature")!=-1: 
-        response=round(response*ratio-100,2)
-       else: 	
-        response=round(response*ratio,2)
-       output=output+"\""+ title + "_" + unit + "\":" + str(response)+","
-       if hexpos=='0x00BA': totalpower+=response*ratio;
-       if hexpos=='0x00BB': totalpower+=response*ratio; 
-  a+=1
- pini=150
- pfin=195
- chunks+=1  
-output=output[:-1]+"}"
-if mqtt==True:
- # Initialise MQTT if configured
- client=paho.Client("inverter")
- if mqtt_username!="":
-  #client.tls_set()  # <--- even without arguments
-  client.username_pw_set(username=mqtt_username, password=mqtt_passwd)
- client.connect(mqtt_server, mqtt_port)
- client.publish(mqtt_topic,totalpower)
- client.publish(mqtt_topic+"/attributes",output)
- print("Ok")
+output = "{"  # initialise json output
+pini = 59
+pfin = 112
+chunks = 0
+while chunks < 2:
+    if chunks == -1:  # testing initialisation
+        pini = 235
+        pfin = 235
+        print("Initialise Connection")
+        
+    start = binascii.unhexlify('A5')  # start
+    length = binascii.unhexlify('1700')  # datalength
+    controlcode = binascii.unhexlify('1045')  # controlCode
+    serial = binascii.unhexlify('0000')  # serial
+    datafield = binascii.unhexlify('020000000000000000000000000000')  # com.igen.localmode.dy.instruction.send.SendDataField
+    pos_ini = str(hex(pini)[2:4].zfill(4))
+    pos_fin = str(hex(pfin - pini + 1)[2:4].zfill(4))
+    businessfield = binascii.unhexlify('0103' + pos_ini + pos_fin)  # sin CRC16MODBUS
+    crc = binascii.unhexlify(str(hex(libscrc.modbus(businessfield))[4:6]) + str(hex(libscrc.modbus(businessfield))[2:4]))  # CRC16modbus
+    checksum = binascii.unhexlify('00')  # checksum F2
+    endCode = binascii.unhexlify('15')
+
+    inverter_sn2 = bytearray.fromhex(hex(inverter_sn)[8:10] + hex(inverter_sn)[6:8] + hex(inverter_sn)[4:6] + hex(inverter_sn)[2:4])
+    frame = bytearray(start + length + controlcode + serial + inverter_sn2 + datafield + businessfield + crc + checksum + endCode)
+
+    checksum = 0
+    frame_bytes = bytearray(frame)
+    for i in range(1, len(frame_bytes) - 2, 1):
+        checksum += frame_bytes[i] & 255
+    frame_bytes[len(frame_bytes) - 2] = int((checksum & 255))
+
+    # OPEN SOCKET
+
+    for res in socket.getaddrinfo(inverter_ip, inverter_port, socket.AF_INET,
+                                  socket.SOCK_STREAM):
+        family, socktype, proto, canonname, sockadress = res
+        try:
+            clientSocket = socket.socket(family, socktype, proto)
+            clientSocket.settimeout(10)
+            clientSocket.connect(sockadress)
+        except socket.error as msg:
+            print("Could not open socket")
+            break
+
+    # SEND DATA
+    # print(chunks)
+    clientSocket.sendall(frame_bytes)
+
+    ok = False
+    while (not ok):
+        try:
+            data = clientSocket.recv(1024)
+            ok = True
+            try:
+                data
+            except:
+                print("No data - Die")
+                sys.exit(1)  # die, no data
+        except socket.timeout as msg:
+            print("Connection timeout");
+            sys.exit(1)  # die
+
+    # PARSE RESPONSE (start position 56, end position 60)
+    totalpower = 0
+    i = pfin - pini
+    a = 0
+
+    while a <= i:
+        p1 = 56 + (a * 4)
+        p2 = 60 + (a * 4)
+        response = twosComplement_hex(str(''.join(hex(ord(chr(x)))[2:].zfill(2) for x in bytearray(data)) + '  ' + re.sub('[^\x20-\x7f]', '', ''))[p1:p2])
+        hexpos = str("0x") + str(hex(a + pini)[2:].zfill(4)).upper()
+        with open("./DYRealTime.txt") as txtfile:
+            parameters = json.loads(txtfile.read())
+        for parameter in parameters:
+            for item in parameter["items"]:
+                title = item["titleHA"]
+                ratio = item["ratio"]
+                unit = item["unit"]
+                for register in item["registers"]:
+                    if register == hexpos and chunks != -1:
+                        # print(hexpos+"-"+title+":"+str(response*ratio)+unit)
+                        if title.find("Temperature") != -1:
+                            response = round(response * ratio - 100, 2)
+                        else:
+                            response = round(response * ratio, 2)
+                        if unit == '%':
+                            unit = 'perc'
+                        output = output + "\"" + title + "_" + unit + "\":" + str(response) + ","
+                        if hexpos == '0x00BA': totalpower += response * ratio;
+                        if hexpos == '0x00BB': totalpower += response * ratio;
+        a += 1
+    pini = 150
+    pfin = 195
+    chunks += 1
+output = output[:-1] + "}"
+
+if mqtt == True:
+    # Initialise MQTT if configured
+    client = paho.Client("inverter")
+    if mqtt_username != "":
+        # client.tls_set()  # <--- even without arguments
+        client.username_pw_set(username=mqtt_username, password=mqtt_passwd)
+    client.connect(mqtt_server, mqtt_port)
+    client.publish(mqtt_topic, totalpower)
+    client.publish(mqtt_topic + "/attributes", output)
+    print("Ok")
 else:
- print(output)
+    print(output)
diff --git a/deye_logger/run.sh b/deye_logger/run.sh
index c47011c..305c9ed 100755
--- a/deye_logger/run.sh
+++ b/deye_logger/run.sh
@@ -19,9 +19,9 @@ mqtt_topic="$(bashio::config 'mqtt_topic')"
 
 bashio::log.info "Starting InverterData.py"
 
-# Run the script every 5 minutes
+# Run the script every 2 minutes
 # TODO: make this value configurable through config.yaml
-watch -n 300 'python3 InverterData.py'
+watch -n 120 'python3 InverterData.py'
 
 #echo "$(bashio::config 'inverter_ip')"
 #echo "$(bashio::config 'inverter_port')"