platformio.ini

; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; http://docs.platformio.org/page/projectconf.html

[common]
; These libraries are used by all builds.
lib_deps = 
    wizard97/SimplyAtomic@^1.0
    adbancroft/avr-fast-shift@^1.1.0
	ridiculousfish/libdivide@^5.2.0
	frankboesing/FastCRC@^1.41
	adbancroft/avr-fast-div@^1.4.0

[env:megaatmega2560]
platform=atmelavr
board=megaatmega2560
framework=arduino
build_unflags = -Os -std=gnu++11
build_flags = -DCRC_BIGTABLES=0 -DUSE_LIBDIVIDE -DAFD_INLINE=0U -O3 -ffast-math -fshort-enums -funroll-loops -Wall -Wextra -std=c++14
lib_deps = 
    EEPROM
    Time
	${common.lib_deps}
	; Note that fp64lib is only used by unit tests. It isn't referenced by the firmware & will be
	; ignored.
    fp64lib/fp64lib@^1.1.20
debug_tool = simavr

;This environment is the same as the above, however compiles for 6 channels of fuel and 3 channels of ignition
[env:megaatmega2560-6-3]
extends = env:megaatmega2560
build_flags = ${env:megaatmega2560.build_flags} -DINJ_CHANNELS=6 -DIGN_CHANNELS=3

;As the above, however compiles for 8 channels of fuel and only a single ignition channel
[env:megaatmega2560-8-1]
extends = env:megaatmega2560
build_flags = ${env:megaatmega2560.build_flags} -DINJ_CHANNELS=8 -DIGN_CHANNELS=1

[env:megaatmega2560_sim_unittest]
extends = env:megaatmega2560
build_src_flags =  ${env:megaatmega2560.build_src_flags} -DSIMULATOR
build_type = test
platform_packages =
    platformio/tool-simavr
test_speed = 9600
upload_protocol = custom
upload_command =
test_testing_command =
    ${platformio.packages_dir}/tool-simavr/bin/simavr
    -m
    atmega2560
    -f
    16000000L
    ${platformio.build_dir}/${this.__env__}/firmware.elf

[env:teensy35]
;platform=teensy
platform=https://github.com/platformio/platform-teensy.git
board=teensy35
framework=arduino
lib_deps = 
	EEPROM
	FlexCAN_T4
	Time
	InternalTemperature
	${common.lib_deps}
extra_scripts = post:post_extra_script.py  

[env:teensy36]
;platform=teensy
platform=https://github.com/platformio/platform-teensy.git
board=teensy36
framework=arduino
lib_deps = 
	EEPROM
	FlexCAN_T4
	Time
	InternalTemperature
	${common.lib_deps}
extra_scripts = post:post_extra_script.py  

[env:teensy41]
;platform=teensy
platform=https://github.com/platformio/platform-teensy.git
board=teensy41
framework=arduino
lib_deps = 
	EEPROM
	FlexCAN_T4
	Time
	InternalTemperature
	${common.lib_deps}
build_flags = -DTEENSY_INIT_USB_DELAY_AFTER=40
extra_scripts = post:post_extra_script.py  

;STM32 Official core
[env:black_F407VE]
platform = ststm32
framework = arduino
board = black_f407ve
; RTC library fixed to 1.2.0, because in newer than that the RTC fails to keep up time. At least up to 1.3.7 version
lib_deps = 
	stm32duino/STM32duino RTC @ 1.2.0
	greiman/SdFat
	elapsedMillis
	${common.lib_deps}
board_build.core = stm32
build_flags = -DUSE_LIBDIVIDE -std=c++14 -UBOARD_MAX_IO_PINS -DENABLE_HWSERIAL2 -DENABLE_HWSERIAL3 -DUSBCON -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -DHAL_CAN_MODULE_ENABLED -DSERIAL_TX_BUFFER_SIZE=128 -DSERIAL_RX_BUFFER_SIZE=128
upload_protocol = dfu
debug_tool = stlink
monitor_speed = 115200

; For testing only
[env:black_F407VE_tests]
extends = env:black_F407VE
upload_protocol = stlink
build_flags = 
    ${env:black_F407VE.build_flags}
	-D PIO_FRAMEWORK_ARDUINO_ENABLE_CDC
	-D USBD_VID=0x0483
	-D USBD_PID=0x0003
	-D USB_MANUFACTURER="Speeduino"
	-D USB_PRODUCT="\"black_f407ve\""    
extra_scripts = post:post_extra_script.py  

; For testing only
[env:black_F407VE-EEPROM-SRAM]
extends = env:black_F407VE
build_flags = ${env:black_F407VE.build_flags} -DSRAM_AS_EEPROM
; For testing only
[env:black_F407VE-EEPROM-SPI]
extends = env:black_F407VE
build_flags = ${env:black_F407VE.build_flags} -DUSE_SPI_EEPROM
; For testing only
[env:black_F407VE-EEPROM-FRAM]
extends = env:black_F407VE
build_flags = ${env:black_F407VE.build_flags} -DFRAM_AS_EEPROM

;STM32 Official core - FCR Micro F4 (STM32F429VIT6, 2MB flash, 8MHz HSE)
; W25Q16 SPI flash on SPI3 (CS=PA15) as EEPROM, CAN1 on ALT_2 (PD0/PD1), USB CDC with VBUS sense on PA9.
[env:FCR_Micro_F4]
platform = ststm32
framework = arduino
; Project-local board def (boards/fcr_micro_f4.json) wrapping the stm32duino F429VITx variant
board = fcr_micro_f4
lib_deps =
	stm32duino/STM32duino RTC @ 1.2.0
	elapsedMillis
	${common.lib_deps}
board_build.core = stm32
; The stm32duino generic F429VITx variant ships without an ldscript.ld, so provide one in-repo.
board_build.ldscript = boards/ldscript_fcr_micro_f4.ld
build_flags = -Wl,--wrap=pinMode
    -DBOARD_FCR_MICRO_F4 -DUSE_LIBDIVIDE -std=c++14 -UBOARD_MAX_IO_PINS -DENABLE_HWSERIAL2 -DENABLE_HWSERIAL3 -DUSBCON -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -DHAL_CAN_MODULE_ENABLED -DSERIAL_TX_BUFFER_SIZE=128 -DSERIAL_RX_BUFFER_SIZE=128 -DUSE_SPI_EEPROM=PA15 -DHSE_VALUE=8000000 -DINJ_CHANNELS=2 -DIGN_CHANNELS=2
upload_protocol = dfu
debug_tool = stlink
monitor_speed = 115200

;STM32 Official core
[env:BlackPill_F401CC]
platform = ststm32
framework = arduino
board = blackpill_f401cc
lib_deps = 
	stm32duino/STM32duino RTC @ 1.2.0
	${common.lib_deps}
board_build.core = stm32
build_flags = -DUSE_LIBDIVIDE -std=c++14 -UBOARD_MAX_IO_PINS -DUSBCON -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -DHAL_DAC_MODULE_DISABLED -DHAL_ETH_MODULE_DISABLED -DHAL_SD_MODULE_DISABLED -DHAL_QSPI_MODULE_DISABLED 
upload_protocol = dfu
debug_tool = stlink
monitor_speed = 115200

;STM32 Official core
[env:BlackPill_F411CE_UART]
platform = ststm32
framework = arduino
board = blackpill_f411ce
lib_deps = 
	stm32duino/STM32duino RTC @ 1.2.0
	${common.lib_deps}
board_build.core = stm32
build_flags = -DUSE_LIBDIVIDE -O3 -std=c++14 -UBOARD_MAX_IO_PINS
upload_protocol = dfu
debug_tool = stlink
monitor_speed = 115200

;STM32 Official core
[env:BlackPill_F411CE_USB]
platform = ststm32
framework = arduino
board = blackpill_f411ce
lib_deps = 
	stm32duino/STM32duino RTC @ 1.2.0
	${common.lib_deps}
board_build.core = stm32
build_flags = -DUSE_LIBDIVIDE -O3 -std=c++14 -UBOARD_MAX_IO_PINS -DUSBCON -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC
upload_protocol = dfu
debug_tool = stlink
monitor_speed = 115200

[platformio]
src_dir=speeduino
default_envs = megaatmega2560
; local.ini is ignored via .gitignore
; This allows developers to make private/local PIO configuration changes without 
; triggering Git changes in their dev tooling (E.g. VS Code)  
extra_configs = local.ini

[env]
test_build_src = yes

[env:native_base]
platform = native
build_unflags = -fno-exceptions
build_flags = 
    -DUSE_LIBDIVIDE 
    -DNATIVE_BOARD 
    -DEXTERNAL_BOARD_H=\"board_native.h\" 
    -DARDUINO=101
	-D USBCON
    -std=c++14 
	-fshort-enums
	-fexceptions
lib_deps = 
	${common.lib_deps}
	https://github.com/adbancroft/ArduinoNativeFake
lib_compat_mode = off

[env:native_code_coverage]
extends = env:native_base
build_unflags = -Os -flto -Werror
build_flags = 
	${env:native_base.build_flags}
	; Needed for setUp()
    -DUNITY_INCLUDE_SETUP_STUBS
	; Turn off optimizations & inlining to improve quality of coverage reporting
	-O0	-fno-inline -fno-inline-small-functions -fno-default-inline
	; Coverage flags
    -lgcov -fprofile-arcs -ftest-coverage