Xiao ESP32-S3 Wio does not work

[Strykar]

I have tried web flashing v1.9 and v1.10 and nothing shows on the Android BT devices list or via Meshcore BT scan. Happy to help troubleshoot this.

[THN32]

Are you using the Kit which comes with LoRa Module on top of the ESP32 or the SX1262 Module which is attached at the bottom?
This Firmware is supposed to only work with the top mounted version but i would love a firmware for the other version with sx1262 v1 as well

[Strykar]

Are you using the Kit which comes with LoRa Module on top of the ESP32 or the SX1262 Module which is attached at the bottom? This Firmware is supposed to only work with the top mounted version but i would love a firmware for the other version with sx1262 v1 as well

I dunno what kits you received, but I have both the ESP32-S3 and NRF kits and it is the lora radio module at the bottom in both the kits.

[THN32]

The Firmware for ESP32S3 is only supposed to work with the LoRa module which is mounted on top, that's what I was told on the discord server.
Same goes for the meshtastic firmware.
We probably need someone who can write a firmware to use the bottom mounted LoRa module wird ESP32S3.

[mike-silva]

Any change on this issue? I have the same kit. The previous commenter mentioned Meshtastic firmware. It works just fine with this kit.

[Strykar]

Working on getting the NRF kit sorted out first (which too works fine on Meshtastic), see #2499