I got PHP error with exempler 2

[vbngithub]

Hi there,

Thanks for job and Exempler,

I am owner of Dune BD Prime 3.0 and have try your solution with my Dune, but the exempler v2 shows the error PHP and i dont know how to send you the log beacause my Storage is on a HDD 100Gb with 2 partitions, 1- for Storage of 10GB 2- 90Gb for Others. I cant see the 1st partition and i cant access to Dune with SSH Telnet ou etc.

For Info, the PLex is installed on My nas and it scraps (scanne my movie on USB Storage attached to NAS).

I did also config for adding the IP of my NAS to exmpler via Dune menu and the port (32400) is ok .

Thanks for Help.
Plz keep your work on and thanks a lot .

[astrago]

Hi newloran2!
Not work for me in v2. (
emplexer and emplexer 2.0-B03(old version)work.

You can fix v2?

[newloran2]

Guys,

Sorry for my very long absence.
I have very little spare time on these days, but i think soon i can go back to emplexer development.

First i think you are using the release version https://github.com/newloran2/emplexer/releases and not the cloned one.
To know what happened i need the emplexer2.log.
To get that log you need to have a usb stick or internal hard drive on dune.
Access this drive over smb, ftp or via the dune interface and create in the root of that drive a folder named dune_plugin_logs.
After that restart your dune and try to use the emplexer again.
The emplexer2.log and maybe emplexer2.log.old will be appear in that folder, send-me these logs.

[vbngithub]

Thanks for helping

i cant see that storage partition on my dune !!! its oh HDD Sata with
Storage and Data partition. I see the Data Partition but no Storage .

I installed the Plex server in My NAS 212+ and it dosnt doing the
Transcoding . if i get sucess to make work your greate Exempler, you think
that can work as Yadis, means just link the film to Dune and it ll be dune
who ll read the file without needing the transcoding by NAS ?

Thanks a lot

[newloran2]

vbngithub,
You need to create the dune_plugin_logs on the root of your data partition.
About the transcode, yes all playbacks are a direct play (like yadis).

[vbngithub]

Hi,

Thanks - I created that dune_plugin_logs on my HDD Sata Interne Dune called
Data and non that of Storage one. i dont see the storage partition.

Still PHP error and calling PHP vendor ....

Thanks

[astrago]

Dear Maestro!
I installed this:
https://github.com/newloran2/emplexer/tree/2.0

log file:
I sent in mail.
Thank You!

[vbngithub]

Hi

For me its OK and work well, Exempler allows to see the Movie stocked on USB & Attached to the nas on My dune 3.0 BD.

But the bundel showing is very slow and must wait 5 min for eeach 15 new bundlle.

Acctually the plex work on NAS with port 50000, when i try to put this port on exempler it dosnt accepte and stays at 32400 ! is it normal ?

Thanks for job

[astrago]

"Still PHP error and calling PHP vendor ...."

Hello everyone!
Check your computer to the Plex media server ip address.
I solved!
emplexer and emplexer 2.0 -B03)works.
I hope it helps you.