tmds_encoder_dvi.v

`timescale 1ns / 1ps
`default_nettype none

// Project F: Display TMDS Encoder for DVI
// (C)2019 Will Green, Open source hardware released under the MIT License
// Learn more at https://projectf.io

module tmds_encoder_dvi(
    input  wire i_clk,          // clock
    input  wire i_rst,          // reset (active high)
    input  wire [7:0] i_data,   // colour data
    input  wire [1:0] i_ctrl,   // control data
    input  wire i_de,           // display enable (active high)
    output reg [9:0] o_tmds     // encoded TMDS data
    );

    // select basic encoding based on the ones in the input data
    wire [3:0] d_ones = {3'b0,i_data[0]} + {3'b0,i_data[1]} + {3'b0,i_data[2]}
        + {3'b0,i_data[3]} + {3'b0,i_data[4]} + {3'b0,i_data[5]}
        + {3'b0,i_data[6]} + {3'b0,i_data[7]};
    wire use_xnor = (d_ones > 4'd4) || ((d_ones == 4'd4) && (i_data[0] == 0));

    // encode colour data with xor/xnor
    /* verilator lint_off UNOPTFLAT */
    wire [8:0] enc_qm;
    assign enc_qm[0] = i_data[0];
    assign enc_qm[1] = (use_xnor) ? (enc_qm[0] ~^ i_data[1]) : (enc_qm[0] ^ i_data[1]);
    assign enc_qm[2] = (use_xnor) ? (enc_qm[1] ~^ i_data[2]) : (enc_qm[1] ^ i_data[2]);
    assign enc_qm[3] = (use_xnor) ? (enc_qm[2] ~^ i_data[3]) : (enc_qm[2] ^ i_data[3]);
    assign enc_qm[4] = (use_xnor) ? (enc_qm[3] ~^ i_data[4]) : (enc_qm[3] ^ i_data[4]);
    assign enc_qm[5] = (use_xnor) ? (enc_qm[4] ~^ i_data[5]) : (enc_qm[4] ^ i_data[5]);
    assign enc_qm[6] = (use_xnor) ? (enc_qm[5] ~^ i_data[6]) : (enc_qm[5] ^ i_data[6]);
    assign enc_qm[7] = (use_xnor) ? (enc_qm[6] ~^ i_data[7]) : (enc_qm[6] ^ i_data[7]);
    assign enc_qm[8] = (use_xnor) ? 0 : 1;
    /* verilator lint_on UNOPTFLAT */

    // disparity in encoded data for DC balancing: needs to cover -8 to +8
    wire signed [4:0] ones = {4'b0,enc_qm[0]} + {4'b0,enc_qm[1]}
            + {4'b0,enc_qm[2]} + {4'b0,enc_qm[3]} + {4'b0,enc_qm[4]}
            + {4'b0,enc_qm[5]} + {4'b0,enc_qm[6]} + {4'b0,enc_qm[7]};

    wire signed [4:0] zeros = 5'b01000 - ones;
    wire signed [4:0] balance = ones - zeros;

    // record ongoing DC bias
    reg signed [4:0] bias;

    always @ (posedge i_clk)
    begin
        if (i_rst)
        begin
            o_tmds <= 10'b1101010100;  // equivalent to ctrl 2'b00
            bias <= 5'sb00000;
        end
        else if (i_de == 0)  // send control data in blanking interval
        begin
            case (i_ctrl)  // ctrl sequences (always have 7 transitions)
                2'b00:   o_tmds <= 10'b1101010100;
                2'b01:   o_tmds <= 10'b0010101011;
                2'b10:   o_tmds <= 10'b0101010100;
                default: o_tmds <= 10'b1010101011;
            endcase
            bias <= 5'sb00000;
        end
        else  // send pixel colour data (at most 5 transitions)
        begin
            if (bias == 0 || balance == 0)  // no prior bias or disparity
            begin
                if (enc_qm[8] == 0)
                begin
                    $display("\t%d %b %d, %d, A1", i_data, enc_qm, ones, bias);
                    o_tmds[9:0] <= {2'b10, ~enc_qm[7:0]};
                    bias <= bias - balance;
                end
                else begin
                    $display("\t%d %b %d, %d, A0", i_data, enc_qm, ones, bias);
                    o_tmds[9:0] <= {2'b01, enc_qm[7:0]};
                    bias <= bias + balance;
                end
            end
            else if ((bias > 0 && balance > 0) || (bias < 0 && balance < 0))
            begin
                $display("\t%d %b %d, %d, B1", i_data, enc_qm, ones, bias);
                o_tmds[9:0] <= {1'b1, enc_qm[8], ~enc_qm[7:0]};
                bias <= bias + {3'b0, enc_qm[8], 1'b0} - balance;
            end
            else
            begin
                $display("\t%d %b %d, %d, B0", i_data, enc_qm, ones, bias);
                o_tmds[9:0] <= {1'b0, enc_qm[8], enc_qm[7:0]};
                bias <= bias - {3'b0, ~enc_qm[8], 1'b0} + balance;
            end
        end
    end
endmodule