webserver with a different port for playing audio

[josef2600]

hi,
i was playing with streams-audiokit-webserver_mp3. i connected INMP441 Mems Microphone to esp32-s3 and write it as this:

#include "AudioTools.h"
#include "AudioTools/AudioLibs/AudioBoardStream.h"
#include "AudioTools/AudioCodecs/CodecMP3LAME.h"

IPAddress IPA_address(192, 168, 1, 97);
IPAddress IPA_gateway(192, 168, 1, 1);
IPAddress IPA_subnet(255, 255, 255, 0);
IPAddress IPA_primaryDNS(192, 168, 0, 1);  //optional
IPAddress IPA_secondaryDNS(8, 8, 8, 8);    //optional

const char *ssidd = "josef_wifi";
const char *passwordd = "12345678";
AudioInfo info(16000,1,16);
MP3EncoderLAME mp3;
AudioEncoderServer server(&mp3, ssidd, passwordd);
I2SStream i2sStream;  // Access I2S as stream
ConverterFillLeftAndRight<int16_t> filler(LeftIsEmpty); // fill both channels - or change to RightIsEmpty

void setup()
{
  Serial.begin(115200);
  AudioToolsLogger.begin(Serial, AudioToolsLogLevel::Info);//Warning  Info
  // Configures static IP address (optional)
  if (!WiFi.config(IPA_address, IPA_gateway, IPA_subnet, IPA_primaryDNS, IPA_secondaryDNS))
  {
    Serial.println("WiFi.config: Failed to configure static IPv4...");
  }
  auto confg = i2sStream.defaultConfig(RX_MODE);
  // if quality is bad change to I2S_LSB_FORMAT https://github.com/pschatzmann/arduino-audio-tools/issues/23
  confg.i2s_format = I2S_STD_FORMAT;
  confg.pin_bck = 17;//SCK
  confg.pin_ws = 16;//WS
  confg.pin_data = 18;//SD
  //  L/R  pin to GND
  confg.bits_per_sample = 16;
  confg.sample_rate = 16000;
  confg.channels = 1;
  confg.is_master = true;
  //confg.mime = "audio/mp3";
  //confg.channel_format = I2S_CHANNEL_FMT_ALL_RIGHT;  // or left ?
  //confg.auto_clear = false;
  //confg.signal_type = PDM;
  
  i2sStream.begin(confg);
  Serial.println("I2S started");
  vTaskDelay(150);
  // start data sink
  server.begin(i2sStream, confg, &filler);
  Serial.println("Server started");
}

void loop()
{
  // Handle new connections
  //server.doLoop();
  server.copy();
  vTaskDelay(1);
}

it works perfectly. i convert the mono to stereo and play it with VLC player, and i make it static IP. it is good.
problem is, it play the audio on the root page. but i want my root to have other stuff like setting for ip and password and other things. it has to be webserver. is there a way to give the audio part a different page or port? like it play audio in the address 192.168.1.97/audio ? or 192.168.1.97:7000 ? thank you.

[pschatzmann]

Just define the port in the constructor

[josef2600]

thank you! its perfect!!! happy happy!
i did AudioEncoderServer server(&mp3, ssidd, passwordd, 7000); and WebServer server80(80); . now all is working.
but i read it from AudioServer.h. excellent work. thank you.