sparkfun
diff --git a/‎Binaries/For_SD_Loading/RTK_Surveyor_Firmware_v12.bin‎
1.36 MB b/‎Binaries/For_SD_Loading/RTK_Surveyor_Firmware_v12.bin‎
1.36 MB
diff --git a/‎Binaries/For_SD_Loading/RTK_Surveyor_Firmware_v12rc-April22.bin‎
-1.37 MB b/‎Binaries/For_SD_Loading/RTK_Surveyor_Firmware_v12rc-April22.bin‎
-1.37 MB
diff --git a/‎Binaries/For_SD_Loading/RTK_Surveyor_Firmware_v12rc.bin‎
-1.38 MB b/‎Binaries/For_SD_Loading/RTK_Surveyor_Firmware_v12rc.bin‎
-1.38 MB
diff --git a/‎Binaries/RTK_Surveyor_Firmware_v12_combined.bin‎
1.42 MB b/‎Binaries/RTK_Surveyor_Firmware_v12_combined.bin‎
1.42 MB
diff --git a/‎Binaries/RTK_Surveyor_Firmware_v12rc_combined.bin‎
-1.44 MB b/‎Binaries/RTK_Surveyor_Firmware_v12rc_combined.bin‎
-1.44 MB
diff --git a/‎Binaries/batch_program.bat‎
Lines changed: 1 addition & 1 deletion b/‎Binaries/batch_program.bat‎
Lines changed: 1 addition & 1 deletion
diff --git a/‎Firmware/RTK_Surveyor/RTK_Surveyor.ino.esp32.bin‎
1.36 MB b/‎Firmware/RTK_Surveyor/RTK_Surveyor.ino.esp32.bin‎
1.36 MB
diff --git a/‎Testing/flash_download_tool_v3.8.5/bin/RTK_Surveyor_Firmware_v12.bin‎
1.36 MB b/‎Testing/flash_download_tool_v3.8.5/bin/RTK_Surveyor_Firmware_v12.bin‎
1.36 MB
diff --git a/‎Testing/flash_download_tool_v3.8.5/bin/RTK_Surveyor_Firmware_v12rc.bin‎
-1.38 MB b/‎Testing/flash_download_tool_v3.8.5/bin/RTK_Surveyor_Firmware_v12rc.bin‎
-1.38 MB
diff --git a/‎Testing/flash_download_tool_v3.8.5/combine/target.bin‎
1.42 MB b/‎Testing/flash_download_tool_v3.8.5/combine/target.bin‎
1.42 MB
@@ -9,7 +9,7 @@ if [%1]==[] goto usage
 @echo -
 @echo Programming binary: %1 on %2
 
-rem @esptool.exe --chip esp32 --port COM6 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0 RTK_Surveyor_Firmware_v11_combined.bin
+rem @esptool.exe --chip esp32 --port COM6 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0 RTK_Surveyor_Firmware_v12_combined.bin
 @esptool.exe --chip esp32 --port %2 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0 %1
 
 @echo Done programming! Ready for next board.