Merge remote-tracking branch 'regmap/for-next' into sound/upstream-20251030

Author: bardliao

drivers/base/regmap/regmap-slimbus.c

@@ -48,8 +48,7 @@ struct regmap *__regmap_init_slimbus(struct slim_device *slimbus,
 	if (IS_ERR(bus))
 		return ERR_CAST(bus);
 
-	return __regmap_init(&slimbus->dev, bus, &slimbus->dev, config,
-			     lock_key, lock_name);
+	return __regmap_init(&slimbus->dev, bus, slimbus, config, lock_key, lock_name);
 }
 EXPORT_SYMBOL_GPL(__regmap_init_slimbus);
 
@@ -63,8 +62,7 @@ struct regmap *__devm_regmap_init_slimbus(struct slim_device *slimbus,
 	if (IS_ERR(bus))
 		return ERR_CAST(bus);
 
-	return __devm_regmap_init(&slimbus->dev, bus, &slimbus, config,
-				  lock_key, lock_name);
+	return __devm_regmap_init(&slimbus->dev, bus, slimbus, config, lock_key, lock_name);
 }
 EXPORT_SYMBOL_GPL(__devm_regmap_init_slimbus);
 

include/linux/regmap.h

@@ -1644,7 +1644,7 @@ struct regmap_irq_chip_data;
  * @status_invert: Inverted status register: cleared bits are active interrupts.
  * @status_is_level: Status register is actuall signal level: Xor status
  *		     register with previous value to get active interrupts.
- * @wake_invert: Inverted wake register: cleared bits are wake enabled.
+ * @wake_invert: Inverted wake register: cleared bits are wake disabled.
  * @type_in_mask: Use the mask registers for controlling irq type. Use this if
  *		  the hardware provides separate bits for rising/falling edge
  *		  or low/high level interrupts and they should be combined into