Skip to content

Latest commit

 

History

History
45 lines (33 loc) · 1.14 KB

README.md

File metadata and controls

45 lines (33 loc) · 1.14 KB

Dotfiles

Installation

Generic Linux (dotfiles only)

  1. Clone the repository, navigate to the directory where you cloned the repository and run the scripts/config-unix.sh script:
git clone https://github.com/thomasfaingnaert/dotfiles ~/.dotfiles && \
cd ~/.dotfiles && \
./scripts/config-unix.sh

Arch

  1. Reset EFI Secure Boot keys (in order to enter Setup Mode).
  2. Boot normal archiso.
  3. Connect to internet (e.g. use iwctl and station wlan0 connect SSID).
  4. Install git, clone this repository, and run the install script:
pacman -Sy git
git clone https://github.com/thomasfaingnaert/dotfiles
./dotfiles/scripts/arch/install.sh
./dotfiles/scripts/arch/post-install.sh

Ubuntu

  1. Clone the repository, navigate to the directory where you cloned the repository and run the scripts/ubuntu/post-install.sh configuration script:
sudo apt install -y git && \
git clone https://github.com/thomasfaingnaert/dotfiles ~/.dotfiles && \
cd ~/.dotfiles && \
./scripts/ubuntu/post-install.sh
  1. Generate an SSH key, and add it to GitHub:
ssh-keygen && \
cat ~/.ssh/id_ed25519.pub | xclip -sel c