diff --git a/src/helpers/CommonCLI.cpp b/src/helpers/CommonCLI.cpp
index f2f961b93a..e20bbb1c02 100644
--- a/src/helpers/CommonCLI.cpp
+++ b/src/helpers/CommonCLI.cpp
@@ -717,6 +717,9 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
       LocationProvider * l = _sensors->getLocationProvider();
       if (l != NULL) {
         l->syncTime();
+        strcpy(reply, "ok");
+      } else {
+        strcpy(reply, "gps provider not found");
       }
     } else if (memcmp(command, "gps setloc", 10) == 0) {
       _prefs->node_lat = _sensors->node_lat;
diff --git a/src/helpers/RefCountedDigitalPin.h b/src/helpers/RefCountedDigitalPin.h
index 753f6c30e9..f30c4c58be 100644
--- a/src/helpers/RefCountedDigitalPin.h
+++ b/src/helpers/RefCountedDigitalPin.h
@@ -20,7 +20,10 @@ class RefCountedDigitalPin {
       digitalWrite(_pin, _active);
     }
   }
+
   void release() {
+    if (_claims == 0) return; // avoid negative _claims
+
     _claims--;
     if (_claims == 0) {
       digitalWrite(_pin, !_active);
diff --git a/variants/heltec_tracker/platformio.ini b/variants/heltec_tracker/platformio.ini
index dba05dcf5f..1dbda126d2 100644
--- a/variants/heltec_tracker/platformio.ini
+++ b/variants/heltec_tracker/platformio.ini
@@ -32,6 +32,11 @@ build_flags =
   -D PIN_TFT_LEDA_CTL=21     ; LEDK (switches on/off via mosfet to create the ground)
   -D PIN_GPS_RX=33
   -D PIN_GPS_TX=34
+  -D PIN_GPS_EN=35              ; N-ch MOSFET Q2 drives P-ch high-side switch → active HIGH (default)
+  -D PIN_GPS_RESET=36
+  -D PIN_GPS_RESET_ACTIVE=LOW
+  -D GPS_BAUD_RATE=115200
+  -D ENV_INCLUDE_GPS=1
   -D SX126X_DIO2_AS_RF_SWITCH=true
   -D SX126X_DIO3_TCXO_VOLTAGE=1.8
   -D SX126X_CURRENT_LIMIT=140
diff --git a/variants/heltec_tracker/target.cpp b/variants/heltec_tracker/target.cpp
index 25c2634bb1..f801bacb94 100644
--- a/variants/heltec_tracker/target.cpp
+++ b/variants/heltec_tracker/target.cpp
@@ -16,7 +16,8 @@ WRAPPER_CLASS radio_driver(radio, board);
 
 ESP32RTCClock fallback_clock;
 AutoDiscoverRTCClock rtc_clock(fallback_clock);
-MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+// GPS_EN (GPIO35) drives N-ch MOSFET → P-ch high-side switch; GPS_RESET (GPIO36) active LOW
+MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock, GPS_RESET, GPS_EN, &board.periph_power);
 HWTSensorManager sensors = HWTSensorManager(nmea);
 
 #ifdef DISPLAY_CLASS
@@ -58,18 +59,16 @@ mesh::LocalIdentity radio_new_identity() {
 
 void HWTSensorManager::start_gps() {
   if (!gps_active) {
-    board.periph_power.claim();
-
+    _location->begin();  // Claims periph_power via RefCountedDigitalPin
     gps_active = true;
-    Serial1.println("$CFGSYS,h35155*68");
+    Serial1.println("$CFGSYS,h35155*68");  // Configure GPS for all constellations
   }
 }
 
 void HWTSensorManager::stop_gps() {
   if (gps_active) {
     gps_active = false;
-
-    board.periph_power.release();
+    _location->stop();  // Releases periph_power via RefCountedDigitalPin
   }
 }
 
diff --git a/variants/heltec_tracker/target.h b/variants/heltec_tracker/target.h
index 5296fb2c24..29099f46a3 100644
--- a/variants/heltec_tracker/target.h
+++ b/variants/heltec_tracker/target.h
@@ -28,6 +28,7 @@ class HWTSensorManager : public SensorManager {
   const char* getSettingName(int i) const override;
   const char* getSettingValue(int i) const override;
   bool setSettingValue(const char* name, const char* value) override;
+  LocationProvider* getLocationProvider() override { return _location; }
 };
 
 extern HeltecV3Board board;
diff --git a/variants/heltec_v4/platformio.ini b/variants/heltec_v4/platformio.ini
index c5011e0e9b..71ffc2e6a9 100644
--- a/variants/heltec_v4/platformio.ini
+++ b/variants/heltec_v4/platformio.ini
@@ -22,7 +22,7 @@ build_flags =
   -D P_LORA_PA_TX_EN=46  ; PA CPS - GC1109 TX PA full(High) / bypass(Low)
   -D PIN_USER_BTN=0
   -D PIN_VEXT_EN=36
-  -D PIN_VEXT_EN_ACTIVE=LOW
+  -D PIN_VEXT_EN_ACTIVE=HIGH
   -D LORA_TX_POWER=10 ;If it is configured as 10 here, the final output will be 22 dbm.
   -D MAX_LORA_TX_POWER=22 ; Max SX1262 output
   -D SX126X_REGISTER_PATCH=1       ; Patch register 0x8B5 for improved RX
@@ -54,8 +54,6 @@ build_flags =
   -D PIN_BOARD_SDA=17
   -D PIN_BOARD_SCL=18
   -D PIN_OLED_RESET=21
-  -D ENV_PIN_SDA=4
-  -D ENV_PIN_SCL=3
 build_src_filter= ${Heltec_lora32_v4.build_src_filter}
 lib_deps = ${Heltec_lora32_v4.lib_deps}
 
diff --git a/variants/heltec_v4/target.cpp b/variants/heltec_v4/target.cpp
index f971cc6085..54fc05e891 100644
--- a/variants/heltec_v4/target.cpp
+++ b/variants/heltec_v4/target.cpp
@@ -24,7 +24,7 @@ AutoDiscoverRTCClock rtc_clock(fallback_clock);
 #endif
 
 #ifdef DISPLAY_CLASS
-  DISPLAY_CLASS display(&(board.periph_power));
+  DISPLAY_CLASS display(NULL);
   MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
 #endif