Ignoring or changing west runner configuration from runners.yaml / board.cmake

[MaroMetelski]

Hello,
Here's the case I'm struggling with:

• I'd like to use west flash commands with openocd runner to flash my nrf52840dk_nrf52840 board not through default jlink interface, but using an external probe (which is an option supported by the physical board - just connect the probe to "debug in" port).
• nrf52840dk_nrf52840 board.cmake file provides openocd config through runners.yaml with some values I'd like to ignore or set to my own.

Is there any way this could be done that I'm missing? By looking into run_common.py, runners/openocd.py I'm not able to find such solution. It seems that you can overwrite values residing under runners.yaml "common configuration values".

zephyr/scripts/west_commands/run_common.py

Line 130 in 1e02dd0

# Options used to override RunnerConfig values in runners.yaml.

But not those runner-specific in case of openocd runner.
Maybe I should somehow overwrite the board.cmake file itself through CMake?
The most intuitive way to do so, at least for me, would be to just do something west flash -r openocd --config <my_custom_config> --ignore-runner-args. In case of openocd runner the arguments can't be "forced out" by overwriting them, since, for example, adding new --pre-init-cmd appends, and not overwrites.
For now i resorted to just using openocd itself.
If the solution doesn't yet exists I could work on that, the simplest solution I see is:

• add some option to --ignore-runner-args to clear any runner-specific args coming from runners.yaml.