Skip to content

E Mapping

Jump to bottom
00fox edited this page Dec 10, 2022 · 4 revisions

Mapping Each line correspond to a different mapping

Mappings are treated in order,

  • Then you can decide for complex actions or shifts with or without the need of modes (shifted)
  • For example you can use L1, and even L1R1 or more complex situations
  • to determine which action square button will launch

Each tab corresponds to a drawer, in which you can organize the different mappings

  • Each of these tabs are by default, like the first one, set to 'Always', but just show their numbers.
  • 'Always' means that all mappings, if they are checked, will always work, just, the tabs are processed in the order of appearance
  • But you can assign a mode for each of these tabs, which allows you to say that the mappings they contain will only be active in this mode
  • For this, just right click on the tab
  • The tabs left in the 'Always' position will remain active even if you are in another mode than the starting one (1) (see Special mouse actions to know how)
  • The first tab is neutral and cannot be assigned to another mode, the others (1-8) all can. There is no order to follow, and two tabs can share the same mode. On the other hand, the order of processing is also the order of the tabs

There is a dual view mode, where you can clone a tab

  • For example to compare, move
  • Or simply fill ViGEm with the values of mapping in front of you
  • The second window will stay opened in extended view (see Efficiency) for this purpose. You still can close it manually
  • Otherwise, automatically hidden, outside extended mode, if you change tabs
  • You get it back if you change again for Mapping Tab, until you manually close it

Mapping

By right-clicking on elements of the list, you can:

  • Order, add, delete, disable, copy or edit (double click or right click menu) your mappings easily
  • Or Move them to another tab (0-8, 0 is the first, always seen as 'Always')

Two different views exist (will be modified in futur to see both the same time inside a larger window)

  • Each source, destination, tags
  • Each source, notice
  • Swap between them by right clicking on the list and choosing 'Swap view' in the menu that will pop

Edit, delete, disable, copy and move actions can process multiple mappings the same time

  • You can for example copy Square/Triangle/Circle/Cross bloc, move the copies in another mode and after alter their actions individually
  • When editing, editor is a blank one, and only touched values will be repercuted to the selection you've made before. You don't need to enter a valid DS/vJoy button

When copy only one, it is added just after the source of the copy, if multiple ones are processed, they are all added at the end of the Tab

Add, move a sepator, for clarity or organization, at the end or specified location

  • Cant't be edited, and does not interfere with the operation

Mapping

Source Button:

  • First column is the principal source (see it particular function at the start of Mapping editing, and or/xor conditions)
  • '+' Indicates combination (columns 2,3,4,5)
  • '||' Indicates combination with or condition (second and third columns)
    • '⊕' Indicates combination with xor condition (second and third columns)
  • '-' Indicates this mapping won't be launched if this button is pressed (see 'not' and 'pause' conditions) (third and fourth columns)
    • '=' Indicates this mapping won't be launched if this button is pressed, but continue if already launched (third and fourth columns)
  • '#' Indicates this button will be disabled for next mappings, except if 'Force' tag is activated (all)
    • '✱' Even if Short (or Double), while release time, before time to activate spent (or second press)
  • Purple indicates simple disable, blue indictates double disable, grey indicates inactive mapping
  • Already configured vJoy buttons can be used as source, in conjunctions with DS buttons

Destination Button:

  • See a brief of what will be launched like vJoy, modes, special actions
  • You don't need vJoy installed, if not, buttons are virtual, but usefull for remapping etc, if yes, they match vJoy selected device number
  • '#' Indicates this button will be disabled for next mappings, when this button activated, except if 'Force' tag is activated
    • '>' Indicates this button will be disabled for next mappings, until the end of the time stamps, except if 'Force' tag is activated
  • '✓' Indicates this button will be switched on, as long as it is not swithed off again, or toggled
    • '✕' Indicates this button will be switched off, as long as it is not swithed on, or toggled

Tags:

Tag Description
I IfMouse condition is in use (see If mouse/Force)
F Force condition is in use (see If mouse/Force)
S Short press
D Double press (can be mixed, see Input method)
L Long press
C Interrupt condition is in use (see Controls)
12B Pause condition is in use (see Controls)
►YR Transitivity condition is in use (see Controls and Transitivity)
T Toggle condition is in use (see Controls)
RZW An OnRelease (/+NoRelease/+NlRelease) condition is in use (see OnRelease)
M If mouse will be in used (checkboxes choice, mouse actions are in Mapping Button) (see If Mouse actions and Grid)
  • a lowercase indicates that the checkbox is double checked for this condition
Clone this wiki locally