Popcount

Copyright © 2007 Bart Massey
2021-03-05

Here's some implementations of bit population count in C and Rust, with benchmarks.

The writeup in this README is based on work from 2007 and later, as far as I can tell today. It consists of status, and then a chronological log including benchmark results.

Background

Everybody on the net does bit population count. I needed to do it for XCB. My criteria were:

Should be fast even on cruddy machines (so limit operators to integer ones and try to avoid multiply and especially divide).
Should be deterministically fast in the worst case.
Should be comprehensible / maintainable.

X has always used the venerable HAKMEM 169 algorithm, but this didn't seem very good for the above criteria. Keith Packard, who inserted the HAKMEM code, tells me he selected it mainly because it was the first reasonable thing he came across when he was looking for an algorithm.

I wrote this code to benchmark some tries at a replacement. The Wikipedia page was a fairly good starting point.

Hacker's Delight was a useful reference. I'd lost my copy of the book, but I've now replaced it and I can say that there's nothing better in there than the stuff in here (as of the second edition), which is a pretty strong statement.

I think my code is also a reasonable tutorial for micro-benchmarking frameworks, illustrating some reasonable techniques. There's still some things I would fix, though: see below.

Build and Run

You can build the C code with both GCC and Clang and the Rust code with Cargo by typing make, but you should first examine the Makefile and set what you need to tune. Depending on your environment, you might just want to build specific binaries.

Once you've built popcount_gcc or whichever, run it with a number of iterations to bench: 100000 is good to start. It will spit out some explanatory numbers.

Advice

If you need predictable speed, use __builtin_popcount() (GCC, Clang) or count_ones() (Rust). Your machine might have a popcount instruction (most modern ones finally do), and this will use it if present. C code will be portable only to GCC-compatible C compilers. Rust code will currently only get a speedup on x86 when compiled with --cpu-type native. All compilers bench reasonably fast on my box without a popcount instruction available; looks like they are using popcount_2 or similar, but generating slightly better code. (I haven't investigated what they are actually doing.)
If you want true machine-independence and don't care too much about speed, use the famous popcount_2. It's fast enough, familiar and completely portable.
Use popcount_tabular_8 if you're willing to burn some cache (not much) and want a slight but portable speedup over popcount_2. Also if you're on some machine without a barrel shifter, this can be adapted to not do any shifts without too much work at the expense of hitting memory. (Do byte reads from the input variable.)

Future Improvements

The op is called in a tight loop, so self-pipelining is in play. This isn't very realistic. However, it's hard to build a reasonable set of calling environments, and hard to calibrate out their effects.
I only report elapsed time. This is probably OK for this application, but it would be easy to add user and system time reporting.
The user gives the number of iterations of a fixed-size block. I should do the x11perf thing and have the user supply a desired number of seconds instead, and use the preheat loop to calibrate.

For now, I have a set of manually-chosen loop divisors to speed up the slower algorithms. All algorithms take about the same amount of time per "iteration" specified on my machine, although probably not on yours.

Talk

I have included slides from a PDXByte talk I gave in March 2014. Enjoy.

License

This work is made available under the "MIT License". Please see the file LICENSE in this distribution for license terms.

Notes and Results

This is a log of work on the project. Most recent numbers, current entry, then older entries in chronological order.

Benchmark Results

2024-06-27

Got some more self-measured results on a non-x86 machine. Note that the checksum differs from the x86 one, so that will need to be investigated.

The problems with preventing optimization of popcount_mult into a popcount instruction continue. Need a better plan here.

Performance on desktop with Ryzen-9 3900X 4.6GHz processor. GCC 13.2.0-25, Clang 16.0.6, rustc 1.79.0, Debian Bookwork/Trixie/sid.

popcount_naive: 3.125e+07 iters in 356 msecs for 11.39 nsecs/iter
popcount_8: 1.25e+08 iters in 468 msecs for 3.74 nsecs/iter
popcount_6: 1.25e+08 iters in 492 msecs for 3.94 nsecs/iter
popcount_hakmem: 1.25e+08 iters in 612 msecs for 4.90 nsecs/iter
popcount_keane: 1.25e+08 iters in 637 msecs for 5.10 nsecs/iter
popcount_anderson: 8.3333e+07 iters in 425 msecs for 5.10 nsecs/iter
popcount_3: 1.25e+08 iters in 453 msecs for 3.62 nsecs/iter
popcount_4: 1.25e+08 iters in 446 msecs for 3.57 nsecs/iter
popcount_2: 1.25e+08 iters in 463 msecs for 3.70 nsecs/iter
popcount_mult: 1.25e+08 iters in 437 msecs for 3.50 nsecs/iter
popcount_tabular_8: 1.25e+08 iters in 350 msecs for 2.80 nsecs/iter
popcount_tabular_16: 1.25e+08 iters in 553 msecs for 4.42 nsecs/iter
popcount_cc: 5e+08 iters in 352 msecs for 0.70 nsecs/iter
popcount_x86: 5e+08 iters in 353 msecs for 0.71 nsecs/iter

popcount_clang
popcount_naive: 3.125e+07 iters in 442 msecs for 14.14 nsecs/iter
popcount_8: 1.25e+08 iters in 639 msecs for 5.11 nsecs/iter
popcount_6: 1.25e+08 iters in 696 msecs for 5.57 nsecs/iter
popcount_hakmem: 1.25e+08 iters in 530 msecs for 4.24 nsecs/iter
popcount_keane: 1.25e+08 iters in 588 msecs for 4.70 nsecs/iter
popcount_anderson: 8.3333e+07 iters in 391 msecs for 4.69 nsecs/iter
popcount_3: 1.25e+08 iters in 421 msecs for 3.37 nsecs/iter
popcount_4: 1.25e+08 iters in 431 msecs for 3.45 nsecs/iter
popcount_2: 1.25e+08 iters in 443 msecs for 3.54 nsecs/iter
popcount_mult: 1.25e+08 iters in 417 msecs for 3.34 nsecs/iter
popcount_tabular_8: 1.25e+08 iters in 308 msecs for 2.46 nsecs/iter
popcount_tabular_16: 1.25e+08 iters in 495 msecs for 3.96 nsecs/iter
popcount_cc: 5e+08 iters in 332 msecs for 0.66 nsecs/iter
popcount_x86: 5e+08 iters in 332 msecs for 0.66 nsecs/iter

popcount_rs
popcount_naive: 3.125e7 iters in 574 msecs for 18.36 nsecs/iter
popcount_8: 1.25e8 iters in 669 msecs for 5.35 nsecs/iter
popcount_6: 1.25e8 iters in 729 msecs for 5.83 nsecs/iter
popcount_hakmem: 1.25e8 iters in 561 msecs for 4.49 nsecs/iter
popcount_keane: 1.25e8 iters in 620 msecs for 4.96 nsecs/iter
popcount_anderson: 8.3333e7 iters in 356 msecs for 4.28 nsecs/iter
popcount_3: 1.25e8 iters in 446 msecs for 3.57 nsecs/iter
popcount_4: 1.25e8 iters in 448 msecs for 3.59 nsecs/iter
popcount_2: 1.25e8 iters in 469 msecs for 3.75 nsecs/iter
popcount_mult: 1.25e8 iters in 88 msecs for 0.70 nsecs/iter
popcount_tabular_8: 1.25e8 iters in 360 msecs for 2.88 nsecs/iter
popcount_tabular_16: 1.25e8 iters in 547 msecs for 4.38 nsecs/iter
popcount_rs: 5e8 iters in 352 msecs for 0.70 nsecs/iter
popcount_x86: 5e8 iters in 352 msecs for 0.70 nsecs/iter

Performance on Orange Pi Zero 3 1GB with Allwinner H618 1GHz processor. GCC 13.3.0-1, Clang 16.0.6, rustc 1.79.0, Debian Bookworm/Trixie.

popcount_gcc popcount_naive: 3.125e+07 iters in 1680 msecs for 53.76 nsecs/iter popcount_8: 1.25e+08 iters in 1574 msecs for 12.59 nsecs/iter popcount_6: 1.25e+08 iters in 1492 msecs for 11.94 nsecs/iter popcount_hakmem: 1.25e+08 iters in 1989 msecs for 15.91 nsecs/iter popcount_keane: 1.25e+08 iters in 1823 msecs for 14.58 nsecs/iter popcount_anderson: 8.3333e+07 iters in 1215 msecs for 14.58 nsecs/iter popcount_3: 1.25e+08 iters in 1574 msecs for 12.59 nsecs/iter popcount_4: 1.25e+08 iters in 1491 msecs for 11.93 nsecs/iter popcount_2: 1.25e+08 iters in 1574 msecs for 12.59 nsecs/iter popcount_mult: 1.25e+08 iters in 1491 msecs for 11.93 nsecs/iter popcount_tabular_8: 1.25e+08 iters in 1160 msecs for 9.28 nsecs/iter popcount_tabular_16: 1.25e+08 iters in 2589 msecs for 20.71 nsecs/iter popcount_cc: 5e+08 iters in 3647 msecs for 7.29 nsecs/iter

popcount_clang popcount_naive: 3.125e+07 iters in 2936 msecs for 93.95 nsecs/iter popcount_8: 1.25e+08 iters in 1822 msecs for 14.58 nsecs/iter popcount_6: 1.25e+08 iters in 1905 msecs for 15.24 nsecs/iter popcount_hakmem: 1.25e+08 iters in 1905 msecs for 15.24 nsecs/iter popcount_keane: 1.25e+08 iters in 1905 msecs for 15.24 nsecs/iter popcount_anderson: 8.3333e+07 iters in 1270 msecs for 15.24 nsecs/iter popcount_3: 1.25e+08 iters in 1491 msecs for 11.93 nsecs/iter popcount_4: 1.25e+08 iters in 1491 msecs for 11.93 nsecs/iter popcount_2: 1.25e+08 iters in 1574 msecs for 12.59 nsecs/iter popcount_mult: 1.25e+08 iters in 1491 msecs for 11.93 nsecs/iter popcount_tabular_8: 1.25e+08 iters in 1077 msecs for 8.62 nsecs/iter popcount_tabular_16: 1.25e+08 iters in 2505 msecs for 20.04 nsecs/iter popcount_cc: 5e+08 iters in 3647 msecs for 7.29 nsecs/iter

popcount_rs popcount_naive: 3.125e7 iters in 2411 msecs for 77.14 nsecs/iter popcount_8: 1.25e8 iters in 1822 msecs for 14.58 nsecs/iter popcount_6: 1.25e8 iters in 1905 msecs for 15.24 nsecs/iter popcount_hakmem: 1.25e8 iters in 1789 msecs for 14.31 nsecs/iter popcount_keane: 1.25e8 iters in 1839 msecs for 14.71 nsecs/iter popcount_anderson: 8.3333e7 iters in 1667 msecs for 20.01 nsecs/iter popcount_3: 1.25e8 iters in 1342 msecs for 10.74 nsecs/iter popcount_4: 1.25e8 iters in 1342 msecs for 10.74 nsecs/iter popcount_2: 1.25e8 iters in 1425 msecs for 11.40 nsecs/iter popcount_mult: 1.25e8 iters in 852 msecs for 6.82 nsecs/iter popcount_tabular_8: 1.25e8 iters in 4968 msecs for 39.75 nsecs/iter popcount_tabular_16: 1.25e8 iters in 4805 msecs for 38.44 nsecs/iter popcount_rs: 5e8 iters in 3408 msecs for 6.82 nsecs/iter

2021-05-28

Got a nice issue report explaining why popcount_mult has been artificially fast: it was being optimized into a single popcnt instruction. Worked around that, for now at least. It's going to be an ongoing hazard as compilers get better.

Performance on desktop with Ryzen-9 3900X 4.6GHz processor. GCC 10.2.1-6, Clang 12.0.1-+rc1, rustc 1.54.0-nightly 2021-05-27. Debian 5.11.0.

popcount_gcc
popcount_naive: 6.25e+07 iters in 788 msecs for 12.61 nsecs/iter
popcount_8: 2.5e+08 iters in 921 msecs for 3.68 nsecs/iter
popcount_6: 2.5e+08 iters in 954 msecs for 3.82 nsecs/iter
popcount_hakmem: 2.5e+08 iters in 1177 msecs for 4.71 nsecs/iter
popcount_keane: 2.5e+08 iters in 1233 msecs for 4.93 nsecs/iter
popcount_anderson: 1.66666e+08 iters in 823 msecs for 4.94 nsecs/iter
popcount_3: 2.5e+08 iters in 876 msecs for 3.50 nsecs/iter
popcount_4: 2.5e+08 iters in 851 msecs for 3.40 nsecs/iter
popcount_2: 2.5e+08 iters in 899 msecs for 3.60 nsecs/iter
popcount_mult: 2.5e+08 iters in 842 msecs for 3.37 nsecs/iter
popcount_tabular_8: 2.5e+08 iters in 671 msecs for 2.68 nsecs/iter
popcount_tabular_16: 2.5e+08 iters in 1055 msecs for 4.22 nsecs/iter
popcount_cc: 1e+09 iters in 676 msecs for 0.68 nsecs/iter
popcount_x86: 1e+09 iters in 676 msecs for 0.68 nsecs/iter

popcount_clang
popcount_naive: 6.25e+07 iters in 728 msecs for 11.65 nsecs/iter
popcount_8: 2.5e+08 iters in 959 msecs for 3.84 nsecs/iter
popcount_6: 2.5e+08 iters in 934 msecs for 3.74 nsecs/iter
popcount_hakmem: 2.5e+08 iters in 1144 msecs for 4.58 nsecs/iter
popcount_keane: 2.5e+08 iters in 1186 msecs for 4.74 nsecs/iter
popcount_anderson: 1.66666e+08 iters in 791 msecs for 4.75 nsecs/iter
popcount_3: 2.5e+08 iters in 881 msecs for 3.52 nsecs/iter
popcount_4: 2.5e+08 iters in 877 msecs for 3.51 nsecs/iter
popcount_2: 2.5e+08 iters in 887 msecs for 3.55 nsecs/iter
popcount_mult: 2.5e+08 iters in 831 msecs for 3.32 nsecs/iter
popcount_tabular_8: 2.5e+08 iters in 620 msecs for 2.48 nsecs/iter
popcount_tabular_16: 2.5e+08 iters in 998 msecs for 3.99 nsecs/iter
popcount_cc: 1e+09 iters in 668 msecs for 0.67 nsecs/iter
popcount_x86: 1e+09 iters in 667 msecs for 0.67 nsecs/iter

popcount_rs
popcount_naive: 6.25e7 iters in 649 msecs for 10.38 nsecs/iter
popcount_8: 2.5e8 iters in 931 msecs for 3.73 nsecs/iter
popcount_6: 2.5e8 iters in 954 msecs for 3.82 nsecs/iter
popcount_hakmem: 2.5e8 iters in 1176 msecs for 4.70 nsecs/iter
popcount_keane: 2.5e8 iters in 1197 msecs for 4.79 nsecs/iter
popcount_anderson: 1.66666e8 iters in 918 msecs for 5.51 nsecs/iter
popcount_3: 2.5e8 iters in 866 msecs for 3.46 nsecs/iter
popcount_4: 2.5e8 iters in 906 msecs for 3.62 nsecs/iter
popcount_2: 2.5e8 iters in 942 msecs for 3.77 nsecs/iter
popcount_mult: 2.5e8 iters in 872 msecs for 3.49 nsecs/iter
popcount_tabular_8: 2.5e8 iters in 704 msecs for 2.82 nsecs/iter
popcount_tabular_16: 2.5e8 iters in 1067 msecs for 4.27 nsecs/iter
popcount_rs: 1e9 iters in 701 msecs for 0.70 nsecs/iter
popcount_x86: 1e9 iters in 704 msecs for 0.70 nsecs/iter

2021-03-05

Performance on desktop with Ryzen-9 3900X 4.6GHz processor, as of 2021-03-05. GCC 10.2.1-6, Clang 11.0.1-2, rustc 1.52.0-nightly 2021-02-10. Debian 5.10.13-1.

popcount_gcc
popcount_naive: 6.25e+07 iters in 728 msecs for 11.65 nsecs/iter
popcount_8: 2.5e+08 iters in 889 msecs for 3.56 nsecs/iter
popcount_6: 2.5e+08 iters in 922 msecs for 3.69 nsecs/iter
popcount_hakmem: 2.5e+08 iters in 1145 msecs for 4.58 nsecs/iter
popcount_keane: 2.5e+08 iters in 1211 msecs for 4.84 nsecs/iter
popcount_anderson: 1.66666e+08 iters in 814 msecs for 4.88 nsecs/iter
popcount_3: 2.5e+08 iters in 852 msecs for 3.41 nsecs/iter
popcount_4: 2.5e+08 iters in 826 msecs for 3.30 nsecs/iter
popcount_2: 2.5e+08 iters in 871 msecs for 3.48 nsecs/iter
popcount_mult: 2.5e+08 iters in 164 msecs for 0.66 nsecs/iter
popcount_tabular_8: 2.5e+08 iters in 651 msecs for 2.60 nsecs/iter
popcount_tabular_16: 2.5e+08 iters in 1022 msecs for 4.09 nsecs/iter
popcount_cc: 1e+09 iters in 655 msecs for 0.66 nsecs/iter
popcount_x86: 1e+09 iters in 655 msecs for 0.66 nsecs/iter

popcount_clang
popcount_naive: 6.25e+07 iters in 737 msecs for 11.79 nsecs/iter
popcount_8: 2.5e+08 iters in 970 msecs for 3.88 nsecs/iter
popcount_6: 2.5e+08 iters in 945 msecs for 3.78 nsecs/iter
popcount_hakmem: 2.5e+08 iters in 1149 msecs for 4.60 nsecs/iter
popcount_keane: 2.5e+08 iters in 1219 msecs for 4.88 nsecs/iter
popcount_anderson: 1.66666e+08 iters in 814 msecs for 4.88 nsecs/iter
popcount_3: 2.5e+08 iters in 905 msecs for 3.62 nsecs/iter
popcount_4: 2.5e+08 iters in 900 msecs for 3.60 nsecs/iter
popcount_2: 2.5e+08 iters in 912 msecs for 3.65 nsecs/iter
popcount_mult: 2.5e+08 iters in 171 msecs for 0.68 nsecs/iter
popcount_tabular_8: 2.5e+08 iters in 639 msecs for 2.56 nsecs/iter
popcount_tabular_16: 2.5e+08 iters in 1121 msecs for 4.48 nsecs/iter
popcount_cc: 1e+09 iters in 685 msecs for 0.69 nsecs/iter
popcount_x86: 1e+09 iters in 685 msecs for 0.69 nsecs/iter

popcount_rs
popcount_naive: 6.25e7 iters in 711 msecs for 11.38 nsecs/iter
popcount_8: 2.5e8 iters in 921 msecs for 3.68 nsecs/iter
popcount_6: 2.5e8 iters in 914 msecs for 3.66 nsecs/iter
popcount_hakmem: 2.5e8 iters in 1115 msecs for 4.46 nsecs/iter
popcount_keane: 2.5e8 iters in 1164 msecs for 4.66 nsecs/iter
popcount_anderson: 1.66666e8 iters in 912 msecs for 5.47 nsecs/iter
popcount_3: 2.5e8 iters in 845 msecs for 3.38 nsecs/iter
popcount_4: 2.5e8 iters in 855 msecs for 3.42 nsecs/iter
popcount_2: 2.5e8 iters in 886 msecs for 3.54 nsecs/iter
popcount_mult: 2.5e8 iters in 166 msecs for 0.66 nsecs/iter
popcount_tabular_8: 2.5e8 iters in 669 msecs for 2.68 nsecs/iter
popcount_tabular_16: 2.5e8 iters in 1103 msecs for 4.41 nsecs/iter
popcount_rs: 1e9 iters in 671 msecs for 0.67 nsecs/iter
popcount_x86: 1e9 iters in 667 msecs for 0.67 nsecs/iter

Interestingly, the multiply-based popcount benches as fast as the POPCNT instruction on this hardware! I have a hard time believing this — explanations welcome.

Performance on desktop with Intel Core i7-4770K (Haswell) 3.50GHz processor, as of 2021-03-05. GCC 10.2.1-6, Clang 11.0.1-2, rustc 1.52.0-nightly 2021-03-05. Debian 5.10.12-1.

popcount_gcc
popcount_naive: 6.25e+07 iters in 1015 msecs for 16.24 nsecs/iter
popcount_8: 2.5e+08 iters in 1132 msecs for 4.53 nsecs/iter
popcount_6: 2.5e+08 iters in 1093 msecs for 4.37 nsecs/iter
popcount_hakmem: 2.5e+08 iters in 1356 msecs for 5.42 nsecs/iter
popcount_keane: 2.5e+08 iters in 1422 msecs for 5.69 nsecs/iter
popcount_anderson: 1.66666e+08 iters in 948 msecs for 5.69 nsecs/iter
popcount_3: 2.5e+08 iters in 1080 msecs for 4.32 nsecs/iter
popcount_4: 2.5e+08 iters in 995 msecs for 3.98 nsecs/iter
popcount_2: 2.5e+08 iters in 1036 msecs for 4.14 nsecs/iter
popcount_mult: 2.5e+08 iters in 323 msecs for 1.29 nsecs/iter
popcount_tabular_8: 2.5e+08 iters in 774 msecs for 3.10 nsecs/iter
popcount_tabular_16: 2.5e+08 iters in 1626 msecs for 6.50 nsecs/iter
popcount_cc: 1e+09 iters in 1290 msecs for 1.29 nsecs/iter
popcount_x86: 1e+09 iters in 1290 msecs for 1.29 nsecs/iter

popcount_clang
popcount_naive: 6.25e+07 iters in 974 msecs for 15.58 nsecs/iter
popcount_8: 2.5e+08 iters in 1178 msecs for 4.71 nsecs/iter
popcount_6: 2.5e+08 iters in 1079 msecs for 4.32 nsecs/iter
popcount_hakmem: 2.5e+08 iters in 1332 msecs for 5.33 nsecs/iter
popcount_keane: 2.5e+08 iters in 1309 msecs for 5.24 nsecs/iter
popcount_anderson: 1.66666e+08 iters in 872 msecs for 5.23 nsecs/iter
popcount_3: 2.5e+08 iters in 1022 msecs for 4.09 nsecs/iter
popcount_4: 2.5e+08 iters in 1013 msecs for 4.05 nsecs/iter
popcount_2: 2.5e+08 iters in 1004 msecs for 4.02 nsecs/iter
popcount_mult: 2.5e+08 iters in 323 msecs for 1.29 nsecs/iter
popcount_tabular_8: 2.5e+08 iters in 774 msecs for 3.10 nsecs/iter
popcount_tabular_16: 2.5e+08 iters in 1479 msecs for 5.92 nsecs/iter
popcount_cc: 1e+09 iters in 1289 msecs for 1.29 nsecs/iter
popcount_x86: 1e+09 iters in 1288 msecs for 1.29 nsecs/iter

popcount_rs
popcount_naive: 6.25e7 iters in 1152 msecs for 18.44 nsecs/iter
popcount_8: 2.5e8 iters in 1187 msecs for 4.75 nsecs/iter
popcount_6: 2.5e8 iters in 1086 msecs for 4.34 nsecs/iter
popcount_hakmem: 2.5e8 iters in 1332 msecs for 5.33 nsecs/iter
popcount_keane: 2.5e8 iters in 1284 msecs for 5.14 nsecs/iter
popcount_anderson: 1.66666e8 iters in 1148 msecs for 6.89 nsecs/iter
popcount_3: 2.5e8 iters in 1026 msecs for 4.10 nsecs/iter
popcount_4: 2.5e8 iters in 1007 msecs for 4.03 nsecs/iter
popcount_2: 2.5e8 iters in 1036 msecs for 4.14 nsecs/iter
popcount_mult: 2.5e8 iters in 322 msecs for 1.29 nsecs/iter
popcount_tabular_8: 2.5e8 iters in 864 msecs for 3.45 nsecs/iter
popcount_tabular_16: 2.5e8 iters in 1585 msecs for 6.34 nsecs/iter
popcount_rs: 1e9 iters in 1287 msecs for 1.29 nsecs/iter
popcount_x86: 1e9 iters in 1288 msecs for 1.29 nsecs/iter

Again, popcount_mult is unreasonably fast, a big speedup since a year ago. Did GCC catch this pattern and optimize it? Is something else going on?

Performance on Raspberry Pi 400 as of 2021-03-05. GCC 10.2.1, Clang 11.0.1-2, rustc 1.52.0-nightly 2021-03-04. Debian 5.10.0-3-arm64.

popcount_gcc
popcount_naive: 6.25e+07 iters in 2652 msecs for 42.43 nsecs/iter
popcount_8: 2.5e+08 iters in 2643 msecs for 10.57 nsecs/iter
popcount_6: 2.5e+08 iters in 2365 msecs for 9.46 nsecs/iter
popcount_hakmem: 2.5e+08 iters in 2919 msecs for 11.68 nsecs/iter
popcount_keane: 2.5e+08 iters in 2780 msecs for 11.12 nsecs/iter
popcount_anderson: 1.66666e+08 iters in 1854 msecs for 11.12 nsecs/iter
popcount_3: 2.5e+08 iters in 2364 msecs for 9.46 nsecs/iter
popcount_4: 2.5e+08 iters in 2226 msecs for 8.90 nsecs/iter
popcount_2: 2.5e+08 iters in 2224 msecs for 8.90 nsecs/iter
popcount_mult: 2.5e+08 iters in 3058 msecs for 12.23 nsecs/iter
popcount_tabular_8: 2.5e+08 iters in 1670 msecs for 6.68 nsecs/iter
popcount_tabular_16: 2.5e+08 iters in 4662 msecs for 18.65 nsecs/iter
popcount_cc: 1e+09 iters in 12232 msecs for 12.23 nsecs/iter

popcount_clang
popcount_naive: 6.25e+07 iters in 2683 msecs for 42.93 nsecs/iter
popcount_8: 2.5e+08 iters in 2226 msecs for 8.90 nsecs/iter
popcount_6: 2.5e+08 iters in 2225 msecs for 8.90 nsecs/iter
popcount_hakmem: 2.5e+08 iters in 2780 msecs for 11.12 nsecs/iter
popcount_keane: 2.5e+08 iters in 2919 msecs for 11.68 nsecs/iter
popcount_anderson: 1.66666e+08 iters in 1946 msecs for 11.68 nsecs/iter
popcount_3: 2.5e+08 iters in 2223 msecs for 8.89 nsecs/iter
popcount_4: 2.5e+08 iters in 2085 msecs for 8.34 nsecs/iter
popcount_2: 2.5e+08 iters in 2224 msecs for 8.90 nsecs/iter
popcount_mult: 2.5e+08 iters in 3058 msecs for 12.23 nsecs/iter
popcount_tabular_8: 2.5e+08 iters in 1391 msecs for 5.56 nsecs/iter
popcount_tabular_16: 2.5e+08 iters in 4652 msecs for 18.61 nsecs/iter
popcount_cc: 1e+09 iters in 12231 msecs for 12.23 nsecs/iter

popcount_rs
popcount_naive: 6.25e7 iters in 2628 msecs for 42.04 nsecs/iter
popcount_8: 2.5e8 iters in 2226 msecs for 8.91 nsecs/iter
popcount_6: 2.5e8 iters in 2226 msecs for 8.90 nsecs/iter
popcount_hakmem: 2.5e8 iters in 2780 msecs for 11.12 nsecs/iter
popcount_keane: 2.5e8 iters in 2920 msecs for 11.68 nsecs/iter
popcount_anderson: 1.66666e8 iters in 3522 msecs for 21.13 nsecs/iter
popcount_3: 2.5e8 iters in 2224 msecs for 8.90 nsecs/iter
popcount_4: 2.5e8 iters in 2085 msecs for 8.34 nsecs/iter
popcount_2: 2.5e8 iters in 2224 msecs for 8.90 nsecs/iter
popcount_mult: 2.5e8 iters in 3061 msecs for 12.24 nsecs/iter
popcount_tabular_8: 2.5e8 iters in 13344 msecs for 53.37 nsecs/iter
popcount_tabular_16: 2.5e8 iters in 11525 msecs for 46.10 nsecs/iter
popcount_rs: 1e9 iters in 12245 msecs for 12.24 nsecs/iter

The overall timings make sense inasmuch as the Raspberry Pi is clocked about half as fast as the Intel box benchmarked here.

Interestingly, of the non-tabular popcounts, popcount_4 is a noticeable winner over popcount_2 here. Also of note is the terrible performance of Rust on the tabular popcounts — not sure what's going on there.

There's a CNT instruction on this hardware, but it's provided by the Neon SIMD vector processor — the work to get a 32-bit value out of a scalar register and into a vector register, then get the count out, is substantial. As a result, the compiler builtins are fairly dramatically worse than popcount_4.

2020-02-25

Performance as of 2020-02-25. GCC 9.2.1, Clang 8.0.1-7, rustc 1.43.0-nightly 2020-02-24. Intel Core i7-4770K (Haswell) CPU @ 3.50GHz.

$ sh run-bench.sh

popcount_gcc
popcount_naive: 6.25e+07 iters in 929 msecs for 14.86 nsecs/iter
popcount_8: 2.5e+08 iters in 1137 msecs for 4.55 nsecs/iter
popcount_6: 2.5e+08 iters in 1096 msecs for 4.38 nsecs/iter
popcount_hakmem: 2.5e+08 iters in 1361 msecs for 5.44 nsecs/iter
popcount_keane: 2.5e+08 iters in 1427 msecs for 5.71 nsecs/iter
popcount_anderson: 1.66666e+08 iters in 953 msecs for 5.72 nsecs/iter
popcount_3: 2.5e+08 iters in 1088 msecs for 4.35 nsecs/iter
popcount_4: 2.5e+08 iters in 1012 msecs for 4.05 nsecs/iter
popcount_2: 2.5e+08 iters in 1040 msecs for 4.16 nsecs/iter
popcount_mult: 2.5e+08 iters in 985 msecs for 3.94 nsecs/iter
popcount_tabular_8: 2.5e+08 iters in 776 msecs for 3.10 nsecs/iter
popcount_tabular_16: 2.5e+08 iters in 1703 msecs for 6.81 nsecs/iter
popcount_cc: 1e+09 iters in 1294 msecs for 1.29 nsecs/iter
popcount_x86: 1e+09 iters in 1292 msecs for 1.29 nsecs/iter
50332463787

popcount_clang
popcount_naive: 6.25e+07 iters in 1025 msecs for 16.40 nsecs/iter
popcount_8: 2.5e+08 iters in 1983 msecs for 7.93 nsecs/iter
popcount_6: 2.5e+08 iters in 1084 msecs for 4.34 nsecs/iter
popcount_hakmem: 2.5e+08 iters in 1336 msecs for 5.34 nsecs/iter
popcount_keane: 2.5e+08 iters in 1259 msecs for 5.04 nsecs/iter
popcount_anderson: 1.66666e+08 iters in 836 msecs for 5.02 nsecs/iter
popcount_3: 2.5e+08 iters in 1027 msecs for 4.11 nsecs/iter
popcount_4: 2.5e+08 iters in 1018 msecs for 4.07 nsecs/iter
popcount_2: 2.5e+08 iters in 1040 msecs for 4.16 nsecs/iter
popcount_mult: 2.5e+08 iters in 987 msecs for 3.95 nsecs/iter
popcount_tabular_8: 2.5e+08 iters in 778 msecs for 3.11 nsecs/iter
popcount_tabular_16: 2.5e+08 iters in 1664 msecs for 6.66 nsecs/iter
popcount_cc: 1e+09 iters in 1294 msecs for 1.29 nsecs/iter
popcount_x86: 1e+09 iters in 1297 msecs for 1.30 nsecs/iter
50332463787

popcount_rs
popcount_naive: 6.25e7 iters in 1052 msecs for 16.84 nsecs/iter
popcount_8: 2.5e8 iters in 2065 msecs for 8.26 nsecs/iter
popcount_6: 2.5e8 iters in 1095 msecs for 4.38 nsecs/iter
popcount_hakmem: 2.5e8 iters in 1345 msecs for 5.38 nsecs/iter
popcount_keane: 2.5e8 iters in 1290 msecs for 5.16 nsecs/iter
popcount_anderson: 1.66666e8 iters in 1170 msecs for 7.02 nsecs/iter
popcount_3: 2.5e8 iters in 1030 msecs for 4.12 nsecs/iter
popcount_4: 2.5e8 iters in 1009 msecs for 4.04 nsecs/iter
popcount_2: 2.5e8 iters in 1039 msecs for 4.16 nsecs/iter
popcount_mult: 2.5e8 iters in 989 msecs for 3.96 nsecs/iter
popcount_tabular_8: 2.5e8 iters in 869 msecs for 3.48 nsecs/iter
popcount_tabular_16: 2.5e8 iters in 1387 msecs for 5.55 nsecs/iter
popcount_rs: 1e9 iters in 1297 msecs for 1.30 nsecs/iter
popcount_x86: 1e9 iters in 1300 msecs for 1.30 nsecs/iter
50332463787

2020-02-25

Mostly Rust changes. I brought the Rust code up to 2018 Edition, fixed some silliness in the Cargo.toml, and added the Cargo.lock for reproducibility. I also fixed a nit in the driver macro that, while not performance-related, reduced the code ugliness slightly.

Finally, I cleaned up the README.md a bit to reflect current reality.

2018-02-18

I replaced the C and Rust standard random number generators with a common linear congruential PRNG seeded deterministically. This gives better run-to-run and cross-implementation compatibility.

I re-added the long-lost Anderson popcount. There was an… incident with commits in two different upstream repositories for a while, and also the Rust implementation of Anderson is tough because of casting issues. I suspect the Rust performance could be improved, but it's a slow and complicated popcount anyway and I can't bring myself to care. Patches welcome.

After some work, the C and Rust versions run identical benchmarks in identical order and produce an identical total popcount. They are thus as comparable as I know how to make them. I added a benchmarking shell script.

I reorganized this README to be in some sane order and cleaned it up quite a lot.

I relicensed to MIT. This should make it easier for folks to embed these popcounts in random open source things.

2007-11-27

Of the things I tried the one that seemed to be second-fastest on my 2.13GHz Core II Duo (generously given me by Intel—thanks much!) was

/* Divide-and-conquer with a ternary stage to reduce masking */
/* 17 ops, 2 long immediates, 12 stages */
static inline uint32_t
popcount_3(uint32_t x)
{
    uint32_t m1 = 0x55555555;
    uint32_t m2 = 0xc30c30c3;
    x -= (x >> 1) & m1;
    x = (x & m2) + ((x >> 2) & m2) + ((x >> 4) & m2);
    x += x >> 6;
    return  (x + (x >> 12) + (x >> 24)) & 0x3f;
}

This is a classic divide-and-conquer popcount. The only strange twists are the initial ternary stage, which gets rid of a masking stage by making room a little earlier, and the final ternary stage, which gives a few more available ops to a superscalar machine at the end. There's also the standard clever trick to save a mask and op in the first stage.

The slightly strange thing was that the classic binary divide-and-conquer straight off Wikipedia was quite a bit faster.

/* Classic binary divide-and-conquer popcount.
   This is popcount_2() from
   http://en.wikipedia.org/wiki/Hamming_weight */
/* 15 ops, 3 long immediates, 14 stages */
static inline uint32_t
popcount_2(uint32_t x)
{
    uint32_t m1 = 0x55555555;
    uint32_t m2 = 0x33333333;
    uint32_t m4 = 0x0f0f0f0f;
    x -= (x >> 1) & m1;
    x = (x & m2) + ((x >> 2) & m2);
    x = (x + (x >> 4)) & m4;
    x += x >>  8;
    return (x + (x >> 16)) & 0x3f;
}

Why was this strange? My CPU should certainly have been able to dispatch 4 arithmetic ops per cycle and keep everything in registers. Thus, the limiting factor should be either the number of pipeline stages used or the number of immediate loads performed. However, the ternary algorithm has fewer of both of these than the binary one. I fear that the timing loop may be interfering with my results, or that the compiler or the CPU may be losing on dispatch.

The actual performance numbers on my Core II duo were:

$ ./popcount 1000000
popcount_naive: 1.6666e+07 iters in 688 msecs for 41.28 nsecs/iter
popcount_8: 1e+08 iters in 995 msecs for 9.95 nsecs/iter
popcount_6: 2e+08 iters in 1725 msecs for 8.625 nsecs/iter
popcount_hakmem: 2e+08 iters in 1411 msecs for 7.055 nsecs/iter
popcount_keane: 1e+09 iters in 6566 msecs for 6.566 nsecs/iter
popcount_3: 1e+09 iters in 6270 msecs for 6.27 nsecs/iter
popcount_2: 1e+09 iters in 5658 msecs for 5.658 nsecs/iter
popcount_mult: 1e+09 iters in 4169 msecs for 4.169 nsecs/iter

These numbers overall compare quite well with what you would predict based on the number of pipeline stages and arithmetic ops in the algorithms; they say astounding things about the hundreds of picoseconds (picoseconds!) an individual operation takes on a modern processor. While it isn't suitable for my immediate needs, check out the multiply-based implementation, which uses the multiply for the accumulation step at the end. Amazing that it's faster than a couple of shifts and adds on Intel's current flagship parts.

2007-12

I had said "Now that I think about it, though, what's more likely is that the shifts by small powers of two are being done in the address unit as per standard Intel practice, where shifts by multiples of three need to be done on the ALU, reducing the number of pipeline stages for the binary version substantially." It turns out I was wrong; Mike Haertel showed me that the number of instructions is all that will matter here on an Intel processor because of false dependencies.)

On a superscalar RISC processor, I'd actually expect the first algorithm to do better.

2008-04-30

At the suggestion of Bill Trost, I added 8 and 16-bit table-driven popcount implementations. These perform the fastest in the benchmark test-stand, at about 3ns/iteration. They're about the same speed, so one would obviously use the 8-bit version.

The problem with the table-driven speed is that I don't believe it. It's amazing that Intel's L1 cache is so cheap. However, one can expect that the table lookup would occasionally miss this small cache during normal usage, which would be devastating to the performance of this approach. The tight loop here is guaranteeing us that the table becomes locked in cache. Maybe when I get some more energy I'll create a more realistic testbench, and we'll see how the table-driven algorithms compare to the pure-computational ones in 2008.

2009-04-07

At the suggestion of David Taht, Mike Haertel and I investigated the anomalously good performance of the divide-and-conquer popcounts on some 64-bit machines running gcc 3.4. Turns out that this version of gcc is smart enough to notice that the original version of the popcount code didn't have a loop dependency, and that all 64-bit machines have SSE: it was running four iterations of popcount in parallel on the MMX unit. :-) Fixed by introducing the obvious dependency.

2014-03-09

Here's the numbers for my modern Haswell machine (Intel Core i7-4770K CPU @ 3.50GHz), compiled with Debian GCC 4.8.2 -O2 -march=core-avx2.

bartfan @ ./popcount 1000000
popcount_naive: 1.25e+08 iters in 2070 msecs for 16.56 nsecs/iter
popcount_8: 1e+09 iters in 4807 msecs for 4.81 nsecs/iter
popcount_6: 1e+09 iters in 4569 msecs for 4.57 nsecs/iter
popcount_hakmem: 1e+09 iters in 5419 msecs for 5.42 nsecs/iter
popcount_keane: 1e+09 iters in 5674 msecs for 5.67 nsecs/iter
popcount_3: 1e+09 iters in 4037 msecs for 4.04 nsecs/iter
popcount_4: 1e+09 iters in 3958 msecs for 3.96 nsecs/iter
popcount_2: 1e+09 iters in 4134 msecs for 4.13 nsecs/iter
popcount_mult: 1e+09 iters in 3916 msecs for 3.92 nsecs/iter
popcount_tabular_8: 1e+09 iters in 3356 msecs for 3.36 nsecs/iter
popcount_tabular_16: 1e+09 iters in 4372 msecs for 4.37 nsecs/iter

Except for `popcount_naive` (16.68 nsecs/iter) and `popcount_8` (4.80 nsecs/iter) these timings were reproduced exactly on a run ten times as long. Bumping the optimization level to `-O4` made only small differences in these, and subsequently removing the Haswell-specific optimizations made little difference at all.

popcount_naive: 1.25e+08 iters in 2079 msecs for 16.63 nsecs/iter
popcount_8: 1e+09 iters in 4540 msecs for 4.54 nsecs/iter
popcount_6: 1e+09 iters in 4298 msecs for 4.30 nsecs/iter
popcount_hakmem: 1e+09 iters in 5430 msecs for 5.43 nsecs/iter
popcount_keane: 1e+09 iters in 5683 msecs for 5.68 nsecs/iter
popcount_3: 1e+09 iters in 4030 msecs for 4.03 nsecs/iter
popcount_4: 1e+09 iters in 3967 msecs for 3.97 nsecs/iter
popcount_2: 1e+09 iters in 4151 msecs for 4.15 nsecs/iter
popcount_mult: 1e+09 iters in 3921 msecs for 3.92 nsecs/iter
popcount_tabular_8: 1e+09 iters in 3365 msecs for 3.37 nsecs/iter
popcount_tabular_16: 1e+09 iters in 4386 msecs for 4.39 nsecs/iter

In general, compiling with CLANG made the slow benchmarks a little faster, and the fast ones slightly slower. The most important difference was probably `popcount_tabular_8`, which sped to 3.16 nsecs/iter.

Note that most of the conclusions of 2009 remain roughly valid. Naive is still as terrible as one would expect. Most everything else is more-or-less tied, except 8-bit tabular, which is some 25% faster. Note that 16-bit tabular is losing substantially now, and that the divide-and-conquer popcounts have pretty much caught up with multiplication.

2016-02-21

I found out that my previously-benchmarked Haswell machine (Intel Core i7-4770K CPU @ 3.50GHz) has a popcnt instruction. Who knew? I added both a call to __builtin_popcount() and an inline assembly popcnt version to the benchmarks. Here's all the numbers again.

popcount_naive: 1.25e+08 iters in 2076 msecs for 16.61 nsecs/iter
popcount_8: 1e+09 iters in 4520 msecs for 4.52 nsecs/iter
popcount_6: 1e+09 iters in 4525 msecs for 4.53 nsecs/iter
popcount_hakmem: 1e+09 iters in 5622 msecs for 5.62 nsecs/iter
popcount_keane: 1e+09 iters in 5791 msecs for 5.79 nsecs/iter
popcount_3: 1e+09 iters in 4141 msecs for 4.14 nsecs/iter
popcount_4: 1e+09 iters in 4177 msecs for 4.18 nsecs/iter
popcount_2: 1e+09 iters in 4215 msecs for 4.21 nsecs/iter
popcount_mult: 1e+09 iters in 4014 msecs for 4.01 nsecs/iter
popcount_tabular_8: 1e+09 iters in 3417 msecs for 3.42 nsecs/iter
popcount_tabular_16: 1e+09 iters in 4449 msecs for 4.45 nsecs/iter
popcount_cc: 1e+09 iters in 1308 msecs for 1.31 nsecs/iter
popcount_x86: 1e+09 iters in 1313 msecs for 1.31 nsecs/iter

I am a little mystified at the (replicable) difference between these runs and the previous 2014 runs on the same machine. Obviously, we must take this whole thing with a large grant of salt. The most likely difference is the compiler: this is GCC 5.3.1, which seems to do a bit worse overall than the 2014 version. Or something.

To clear things up a bit, I also ran with clang-3.8. Here's that:

popcount_naive: 1.25e+08 iters in 2069 msecs for 16.55 nsecs/iter
popcount_8: 1e+09 iters in 4805 msecs for 4.80 nsecs/iter
popcount_6: 1e+09 iters in 4408 msecs for 4.41 nsecs/iter
popcount_hakmem: 1e+09 iters in 5631 msecs for 5.63 nsecs/iter
popcount_keane: 1e+09 iters in 5108 msecs for 5.11 nsecs/iter
popcount_3: 1e+09 iters in 4162 msecs for 4.16 nsecs/iter
popcount_4: 1e+09 iters in 4137 msecs for 4.14 nsecs/iter
popcount_2: 1e+09 iters in 4224 msecs for 4.22 nsecs/iter
popcount_mult: 1e+09 iters in 4028 msecs for 4.03 nsecs/iter
popcount_tabular_8: 1e+09 iters in 3167 msecs for 3.17 nsecs/iter
popcount_tabular_16: 1e+09 iters in 4040 msecs for 4.04 nsecs/iter
popcount_cc: 1e+09 iters in 1308 msecs for 1.31 nsecs/iter
popcount_x86: 1e+09 iters in 1314 msecs for 1.31 nsecs/iter

Similar, but not the same. Conclusion: it's all in the compiler noise.

Having said that, check out that tasty popcnt instruction! We've always said it doesn't really matter -- and it doesn't, really. But that's pretty clearly the right answer if GCC could figure out how to use it here without help from inlining.

2016-02-24

Noticed that the -march flag should have been set to native.

popcount_naive: 6.25e+08 iters in 10333 msecs for 16.53 nsecs/iter
popcount_8: 2.5e+09 iters in 11225 msecs for 4.49 nsecs/iter
popcount_6: 2.5e+09 iters in 11162 msecs for 4.46 nsecs/iter
popcount_hakmem: 2.5e+09 iters in 13846 msecs for 5.54 nsecs/iter
popcount_keane: 2.5e+09 iters in 14281 msecs for 5.71 nsecs/iter
popcount_3: 2.5e+09 iters in 10171 msecs for 4.07 nsecs/iter
popcount_4: 2.5e+09 iters in 10290 msecs for 4.12 nsecs/iter
popcount_2: 2.5e+09 iters in 10378 msecs for 4.15 nsecs/iter
popcount_mult: 2.5e+09 iters in 9859 msecs for 3.94 nsecs/iter
popcount_tabular_8: 2.5e+09 iters in 8431 msecs for 3.37 nsecs/iter
popcount_tabular_16: 2.5e+09 iters in 11004 msecs for 4.40 nsecs/iter
popcount_cc: 1e+10 iters in 12936 msecs for 1.29 nsecs/iter
popcount_x86: 1e+10 iters in 12942 msecs for 1.29 nsecs/iter

Fixing the architecture flattened things out a bit more, but didn't change results in any interesting way. Basically, on this machine and with current GCC, all the routines run at the same speed except *naive,* which is expectedly slow, and the inline `popcnt` instruction ones, which are expectedly fast.

2018-01-30

Added a Rust implementation. It tries to conform to the C implementation as much as reasonably feasible. The code bodies are essentially copy-pasted.

This code currently needs nightly to get inline assembly support: the x86 popcount will be compiled-out on non-x86, and will cause a runtime assertion failure on x86 without popcnt.

The native Rust u32::count_ones() method is not compiled into a native popcnt instruction in current incarnations unless you tell rustc you have a new enough processor (for example, using RUSTFLAGS=-march=native). Otherwise, count_ones() is about the same speed as all the other fast popcounts, so it's probably always the right thing to use.

Current C numbers, GCC 7.2.0 on my Haswell box described above:

popcount_naive: 6.25e+07 iters in 930 msecs for 14.88 nsecs/iter
popcount_8: 2.5e+08 iters in 1149 msecs for 4.60 nsecs/iter
popcount_6: 2.5e+08 iters in 1111 msecs for 4.44 nsecs/iter
popcount_hakmem: 2.5e+08 iters in 1455 msecs for 5.82 nsecs/iter
popcount_keane: 2.5e+08 iters in 1512 msecs for 6.05 nsecs/iter
popcount_3: 2.5e+08 iters in 1063 msecs for 4.25 nsecs/iter
popcount_4: 2.5e+08 iters in 1034 msecs for 4.14 nsecs/iter
popcount_2: 2.5e+08 iters in 1043 msecs for 4.17 nsecs/iter
popcount_mult: 2.5e+08 iters in 994 msecs for 3.98 nsecs/iter
popcount_tabular_8: 2.5e+08 iters in 856 msecs for 3.42 nsecs/iter
popcount_tabular_16: 2.5e+08 iters in 1095 msecs for 4.38 nsecs/iter
popcount_cc: 1e+09 iters in 1306 msecs for 1.31 nsecs/iter
popcount_x86: 1e+09 iters in 1302 msecs for 1.30 nsecs/iter

Clang 4.0 is probably more comparable because LLVM:

popcount_naive: 6.25e+07 iters in 992 msecs for 15.87 nsecs/iter
popcount_8: 2.5e+08 iters in 1207 msecs for 4.83 nsecs/iter
popcount_6: 2.5e+08 iters in 1097 msecs for 4.39 nsecs/iter
popcount_hakmem: 2.5e+08 iters in 1351 msecs for 5.40 nsecs/iter
popcount_keane: 2.5e+08 iters in 1266 msecs for 5.06 nsecs/iter
popcount_3: 2.5e+08 iters in 1041 msecs for 4.16 nsecs/iter
popcount_4: 2.5e+08 iters in 1022 msecs for 4.09 nsecs/iter
popcount_2: 2.5e+08 iters in 1048 msecs for 4.19 nsecs/iter
popcount_mult: 2.5e+08 iters in 999 msecs for 4.00 nsecs/iter
popcount_tabular_8: 2.5e+08 iters in 779 msecs for 3.12 nsecs/iter
popcount_tabular_16: 2.5e+08 iters in 994 msecs for 3.98 nsecs/iter
popcount_cc: 1e+09 iters in 1304 msecs for 1.30 nsecs/iter
popcount_x86: 1e+09 iters in 1308 msecs for 1.31 nsecs/iter

Current Rust numbers, rustc 1.24.0 nightly 2018-01-01:

popcount_naive: 6.25e7 iters in 971 msecs for 15.54 nsecs/iter
popcount_8: 2.5e8 iters in 1205 msecs for 4.82 nsecs/iter
popcount_6: 2.5e8 iters in 1097 msecs for 4.39 nsecs/iter
popcount_hakmem: 2.5e8 iters in 1349 msecs for 5.40 nsecs/iter
popcount_keane: 2.5e8 iters in 1260 msecs for 5.04 nsecs/iter
popcount_3: 2.5e8 iters in 1060 msecs for 4.24 nsecs/iter
popcount_4: 2.5e8 iters in 1035 msecs for 4.14 nsecs/iter
popcount_2: 2.5e8 iters in 1046 msecs for 4.18 nsecs/iter
popcount_mult: 2.5e8 iters in 996 msecs for 3.98 nsecs/iter
popcount_tabular_8: 2.5e8 iters in 837 msecs for 3.35 nsecs/iter
popcount_tabular_16: 2.5e8 iters in 1211 msecs for 4.84 nsecs/iter
popcount_x86: 1e9 iters in 1305 msecs for 1.31 nsecs/iter
popcount_rs: 2.5e8 iters in 998 msecs for 3.99 nsecs/iter

Up to variances, they're pretty much all the same.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Popcount

Background

Build and Run

Advice

Future Improvements

Talk

License

Notes and Results

Benchmark Results

2024-06-27

2021-05-28

2021-03-05

2020-02-25

2020-02-25

2018-02-18

2007-11-27

2007-12

2008-04-30

2009-04-07

2014-03-09

2016-02-21

2016-02-24

2018-01-30

About

Releases

Packages

Languages

Name		Name	Last commit message	Last commit date
Latest commit History 95 Commits
Cargo.lock		Cargo.lock
Cargo.toml		Cargo.toml
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
pdxbyte-popcount.pdf		pdxbyte-popcount.pdf
popcount.c		popcount.c
popcount.rs		popcount.rs
run-bench.sh		run-bench.sh

License

BartMassey/popcount

Folders and files

Latest commit

History

Repository files navigation

Popcount

Background

Build and Run

Advice

Future Improvements

Talk

License

Notes and Results

Benchmark Results

2024-06-27

2021-05-28

2021-03-05

2020-02-25

2020-02-25

2018-02-18

2007-11-27

2007-12

2008-04-30

2009-04-07

2014-03-09

2016-02-21

2016-02-24

2018-01-30

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages