This acrylic case provides a convenient way of housing up to 4 x Raspberry Pi boards, along with integral 5-port switch, making your desk tidier.
In addition to the acrylic sheet material the following is used:
| Qty | Item |
|---|---|
| 16 | M3 12mm nylon screw |
| 16 | M3 12mm nylon screw w/head removed |
| 4 | M3 16mm nylon screw |
| 12 | M3 20mm nylon hex threaded spacer |
| 4 | M3 5mm nylon spacer |
| 4 | M3 3mm nylon spacer |
| 2 | M2 x 12mm machine screw |
| 2 | M2 hex nut |
| 12 | M3 30mm nylon hex threaded spacer |
| 6 | M3 steel hex nut |
| 2 | M3 x 10mm countersunk steel screw |
| 2 | M3 x 8mm steel machine screw |
| 4 | Clear 10mm diameter rubber bumper |
| 1 | Rectangular rocker switch |
| 1 | XLT panel mount connector |
| 1 | HDMI panel mount connector |
| 2 | USB panel mount connector |
| 1 | Ethernet panel mount connector |
| 1 | 5mm Wide angle white LED |
| 1 | 5-port, 5V-powered switch, de-cased |
| 1 | 270-degree HDMI connector |
| 4 | 20cm flexible/flat Ethernet cable |
| 4 | 2-pin header 2.54" pitch connector |
| X | Lengths of wire to connect power |
| 4 | Raspberry Pi boards |
3mm sheet acrylic stock used throughout Case design requires use of strip wire heater / folder to bend the acrylic sheet
Source: Inkscape SVG
Export: DXF from inkscape