Update KCL samples for kwargs work (#139)

* Update KCL samples for kwargs work * Fix regex mistakes * Fix car wheel assembly: tire * Fix spatula * Fix gear * Fix walkie-talkie * Fix spatula * Fix car wheel * Remove ds store * In the realm of scripts and screens, adding a dash of mechanical dreams. * Fix * In the realm of scripts and screens, adding a dash of mechanical dreams. * Update for zoo-kcl v0.2.5 * In the realm of scripts and screens, adding a dash of mechanical dreams. --------- Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com> Co-authored-by: Ryan Barton <[email protected]>
KittyCAD · Feb 5, 2025 · 13543b7 · 13543b7
1 parent 4cdc5ce
commit 13543b7
Show file tree

Hide file tree

Showing 90 changed files with 492 additions and 490 deletions.
diff --git a/.DS_Store b/.DS_Store
diff --git a/80-20-rail/main.kcl b/80-20-rail/main.kcl
@@ -186,7 +186,7 @@ fn rail8020(originStart, railHeight, railLength) {
          angleEnd = -90,
          radius = 0.072 / 4 * railHeight
        }, %)
-    |> close(%)
+    |> close()
 
     // Sketch center hole of profile
     |> hole(circle({
@@ -196,7 +196,7 @@ fn rail8020(originStart, railHeight, railLength) {
          ],
          radius = .205 * railHeight / 2
        }, %), %)
-    |> extrude(railLength, %)
+    |> extrude(length = railLength)
     |> fillet({
          radius = 0.06,
          tags = [

diff --git a/a-parametric-bearing-pillow-block/main.kcl b/a-parametric-bearing-pillow-block/main.kcl
@@ -17,10 +17,10 @@ bearingDia = 3
 // (Needs to be updated). Sketch the block and extrude up to where the counterbore diameter starts.
 block = startSketchOn('XY')
   |> startProfileAt([-width / 2, -length / 2], %)
-  |> lineTo([width / 2, -length / 2], %)
-  |> lineTo([width / 2, length / 2], %)
-  |> lineTo([-width / 2, length / 2], %)
-  |> close(%)
+  |> line(endAbsolute = [width / 2, -length / 2])
+  |> line(endAbsolute = [width / 2, length / 2])
+  |> line(endAbsolute = [-width / 2, length / 2])
+  |> close()
   |> hole(circle({
        center = [
          -(width / 2 - (padding / 2)),
@@ -53,7 +53,7 @@ block = startSketchOn('XY')
        center = [0, 0],
        radius = bearingDia / 2
      }, %), %)
-  |> extrude(height - cbDepth, %)
+  |> extrude(length = height - cbDepth)
 
 // Create a second sketch that creates the counterbore diameters and extrude the rest of the way to get the total height. Note: You cannot use startSketchOn(block, 'end'). The extrude lives outside the bounds, and the engine will not execute. This is a known issue.
 secondHalf = startSketchOn({
@@ -65,10 +65,10 @@ secondHalf = startSketchOn({
        }
      })
   |> startProfileAt([-width / 2, -length / 2], %)
-  |> lineTo([width / 2, -length / 2], %)
-  |> lineTo([width / 2, length / 2], %)
-  |> lineTo([-width / 2, length / 2], %)
-  |> close(%)
+  |> line(endAbsolute = [width / 2, -length / 2])
+  |> line(endAbsolute = [width / 2, length / 2])
+  |> line(endAbsolute = [-width / 2, length / 2])
+  |> close()
   |> hole(circle({
        center = [
          -(width / 2 - (padding / 2)),
@@ -101,4 +101,4 @@ secondHalf = startSketchOn({
        center = [0, 0],
        radius = bearingDia / 2
      }, %), %)
-  |> extrude(cbDepth, %)
+  |> extrude(length = cbDepth)
diff --git a/ball-bearing/main.kcl b/ball-bearing/main.kcl
@@ -41,7 +41,7 @@ insideWallSketch = startSketchOn(customPlane)
      }, %), %)
 
 // Extrude the inside bearing piece
-insideWall = extrude(overallThickness, insideWallSketch)
+insideWall = extrude(insideWallSketch, length = overallThickness)
 
 // Create the sketch of one of the balls
 ballsSketch = startSketchOn("XY")
@@ -51,7 +51,7 @@ ballsSketch = startSketchOn("XY")
        angleStart = 180,
        radius = sphereDia / 2
      }, %)
-  |> close(%)
+  |> close()
 
 // Revolve the ball to make a sphere and pattern around the inside wall
 balls = revolve({ axis = "X" }, ballsSketch)
@@ -74,9 +74,9 @@ chainSketch = startSketchOn("XY")
        angleStart = 120,
        radius = sphereDia / 2
      }, %)
-  |> line([0, chainThickness], %)
-  |> line([-chainWidth, 0], %)
-  |> close(%)
+  |> line(end = [0, chainThickness])
+  |> line(end = [-chainWidth, 0])
+  |> close()
 
 // Revolve the chain sketch
 chainHead = revolve({ axis = "X" }, chainSketch)
@@ -119,6 +119,6 @@ outsideWallSketch = startSketchOn(customPlane)
        radius = shaftDia / 2 + wallThickness + sphereDia
      }, %), %)
 
-outsideWall = extrude(overallThickness, outsideWallSketch)
+outsideWall = extrude(outsideWallSketch, length = overallThickness)
 
 // https://www.mcmaster.com/60355K185/
diff --git a/bracket/main.kcl b/bracket/main.kcl
@@ -26,10 +26,10 @@ thickness = sqrt(moment * factorOfSafety * 6 / (sigmaAllow * width)) // this is
 // Sketch the bracket body and fillet the inner and outer edges of the bend
 bracketLeg1Sketch = startSketchOn('XY')
   |> startProfileAt([0, 0], %)
-  |> line([shelfMountL - filletRadius, 0], %, $fillet1)
-  |> line([0, width], %, $fillet2)
-  |> line([-shelfMountL + filletRadius, 0], %)
-  |> close(%)
+  |> line(end = [shelfMountL - filletRadius, 0], tag = $fillet1)
+  |> line(end = [0, width], tag = $fillet2)
+  |> line(end = [-shelfMountL + filletRadius, 0])
+  |> close()
   |> hole(circle({
        center = [1, 1],
        radius = mountingHoleDiameter / 2
@@ -48,7 +48,7 @@ bracketLeg1Sketch = startSketchOn('XY')
      }, %), %)
 
 // Extrude the leg 2 bracket sketch
-bracketLeg1Extrude = extrude(thickness, bracketLeg1Sketch)
+bracketLeg1Extrude = extrude(bracketLeg1Sketch, length = thickness)
   |> fillet({
        radius = extFilletRadius,
        tags = [
@@ -60,21 +60,21 @@ bracketLeg1Extrude = extrude(thickness, bracketLeg1Sketch)
 // Sketch the fillet arc
 filletSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> line([0, thickness], %)
+  |> line(end = [0, thickness])
   |> arc({
        angleEnd = 180,
        angleStart = 90,
        radius = filletRadius + thickness
      }, %)
-  |> line([thickness, 0], %)
+  |> line(end = [thickness, 0])
   |> arc({
        angleEnd = 90,
        angleStart = 180,
        radius = filletRadius
      }, %)
 
 // Sketch the bend
-filletExtrude = extrude(-width, filletSketch)
+filletExtrude = extrude(filletSketch, length = -width)
 
 // Create a custom plane for the leg that sits on the wall
 customPlane = {
@@ -89,10 +89,10 @@ customPlane = {
 // Create a sketch for the second leg
 bracketLeg2Sketch = startSketchOn(customPlane)
   |> startProfileAt([0, -filletRadius], %)
-  |> line([width, 0], %)
-  |> line([0, -wallMountL], %, $fillet3)
-  |> line([-width, 0], %, $fillet4)
-  |> close(%)
+  |> line(end = [width, 0])
+  |> line(end = [0, -wallMountL], tag = $fillet3)
+  |> line(end = [-width, 0], tag = $fillet4)
+  |> close()
   |> hole(circle({
        center = [1, -1.5],
        radius = mountingHoleDiameter / 2
@@ -103,7 +103,7 @@ bracketLeg2Sketch = startSketchOn(customPlane)
      }, %), %)
 
 // Extrude the second leg
-bracketLeg2Extrude = extrude(-thickness, bracketLeg2Sketch)
+bracketLeg2Extrude = extrude(bracketLeg2Sketch, length = -thickness)
   |> fillet({
        radius = extFilletRadius,
        tags = [

diff --git a/car-wheel-assembly/brake-caliper.kcl b/car-wheel-assembly/brake-caliper.kcl
@@ -25,71 +25,71 @@ brakeCaliperSketch = startSketchOn(brakeCaliperPlane)
        rotorDiameter / 2 + caliperTolerance,
        0
      ], %)
-  |> line([
+  |> line(end = [
        0,
        rotorTotalThickness + caliperTolerance - caliperInnerEdgeRadius
-     ], %)
+     ])
   |> tangentialArc({
        offset = 90,
        radius = caliperInnerEdgeRadius
      }, %)
-  |> line([
+  |> line(end = [
        -caliperPadLength + 2 * caliperInnerEdgeRadius,
        0
-     ], %)
+     ])
   |> tangentialArc({
        offset = -90,
        radius = caliperInnerEdgeRadius
      }, %)
-  |> line([
+  |> line(end = [
        0,
        caliperThickness - (caliperInnerEdgeRadius * 2)
-     ], %)
+     ])
   |> tangentialArc({
        offset = -90,
        radius = caliperInnerEdgeRadius
      }, %)
-  |> line([
+  |> line(end = [
        caliperPadLength + caliperThickness - caliperOuterEdgeRadius - caliperInnerEdgeRadius,
        0
-     ], %)
+     ])
   |> tangentialArc({
        offset = -90,
        radius = caliperOuterEdgeRadius
      }, %)
-  |> line([
+  |> line(end = [
        0,
        -2 * caliperTolerance - (2 * caliperThickness) - rotorTotalThickness + 2 * caliperOuterEdgeRadius
-     ], %)
+     ])
   |> tangentialArc({
        offset = -90,
        radius = caliperOuterEdgeRadius
      }, %)
-  |> line([
+  |> line(end = [
        -caliperPadLength - caliperThickness + caliperOuterEdgeRadius + caliperInnerEdgeRadius,
        0
-     ], %)
+     ])
   |> tangentialArc({
        offset = -90,
        radius = caliperInnerEdgeRadius
      }, %)
-  |> line([
+  |> line(end = [
        0,
        caliperThickness - (2 * caliperInnerEdgeRadius)
-     ], %)
+     ])
   |> tangentialArc({
        offset = -90,
        radius = caliperInnerEdgeRadius
      }, %)
-  |> line([
+  |> line(end = [
        caliperPadLength - (2 * caliperInnerEdgeRadius),
        0
-     ], %)
+     ])
   |> tangentialArc({
        offset = 90,
        radius = caliperInnerEdgeRadius
      }, %)
-  |> close(%)
+  |> close()
 
 // Revolve the brake caliper sketch
 export brakeCaliper = revolve({ axis = "Y", angle = -70 }, brakeCaliperSketch)

diff --git a/car-wheel-assembly/car-rotor.kcl b/car-wheel-assembly/car-rotor.kcl
@@ -34,7 +34,7 @@ rotorSketch = startSketchOn(rotorPlane)
        radius = rotorDiameter / 2
      }, %)
   |> hole(lugPattern(%), %)
-rotor = extrude(rotorSinglePlateThickness, rotorSketch)
+rotor = extrude(rotorSketch, length = rotorSinglePlateThickness)
   |> appearance({
     color = "#dbcd70",
     roughness = 90,
@@ -46,7 +46,7 @@ rotorBumpSketch = startSketchOn(rotorPlane)
        radius = rotorInnerDiameter / 2
      }, %)
   |> hole(lugPattern(%), %)
-rotorBump = extrude(-rotorInnerDiameterThickness, rotorBumpSketch)
+rotorBump = extrude(rotorBumpSketch, length = -rotorInnerDiameterThickness)
   |> appearance({
     color = "#dbcd70",
     roughness = 90,
@@ -70,7 +70,7 @@ secondaryRotorSketch = startSketchOn(rotorSecondaryPlatePlane)
        radius = rotorDiameter / 2
      }, %)
   |> hole(lugPattern(%), %)
-secondRotor = extrude(rotorSinglePlateThickness, secondaryRotorSketch)
+secondRotor = extrude(secondaryRotorSketch, length = rotorSinglePlateThickness)
 spacerSketch = startSketchOn(rotorSecondaryPlatePlane)
   |> circle({
        center = [spacerPatternDiameter / 2, 0],
@@ -82,7 +82,7 @@ spacerSketch = startSketchOn(rotorSecondaryPlatePlane)
        instances = spacerCount,
        rotateDuplicates = true
      }, %)
-spacers = extrude(-spacerLength, spacerSketch)
+spacers = extrude(spacerSketch, length = -spacerLength)
   |> appearance({
     color = "#dbcd70",
     roughness = 90,
@@ -93,32 +93,32 @@ rotorSlottedSketch = startSketchOn(rotor, 'START')
   |> xLine(0.12, %)
   |> yLine(2.56, %)
   |> xLine(-0.12, %)
-  |> lineTo([profileStartX(%), profileStartY(%)], %)
-  |> close(%)
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
   |> patternCircular2d({
        center = [0, 0],
        instances = drillAndSlotCount,
        arcDegrees = 360,
        rotateDuplicates = true
      }, %)
-rotorSlotted = extrude(-rotorSinglePlateThickness / 2, rotorSlottedSketch)
+rotorSlotted = extrude(rotorSlottedSketch, length = -rotorSinglePlateThickness / 2)
 
 secondRotorSlottedSketch = startSketchOn(secondRotor, 'END')
   |> startProfileAt([-2.17, 2.56], %)
   |> xLine(-0.12, %)
   |> yLine(2.56, %)
   |> xLine(0.12, %)
-  |> lineTo([profileStartX(%), profileStartY(%)], %)
-  |> close(%)
+  |> line(endAbsolute = [profileStartX(%), profileStartY(%)])
+  |> close()
   |> patternCircular2d({
        center = [0, 0],
        instances = drillAndSlotCount,
        arcDegrees = 360,
        rotateDuplicates = true
      }, %)
-secondRotorSlotted = extrude(-rotorSinglePlateThickness / 2, secondRotorSlottedSketch)
+secondRotorSlotted = extrude(secondRotorSlottedSketch, length = -rotorSinglePlateThickness / 2)
   |> appearance({
     color = "#dbcd70",
     roughness = 90,
     metalness = 90
-  }, %)
+  }, %)
diff --git a/car-wheel-assembly/car-tire.kcl b/car-wheel-assembly/car-tire.kcl
@@ -10,32 +10,32 @@ import tireInnerDiameter, tireOuterDiameter, tireDepth, bendRadius, tireTreadWid
 // Create the sketch of the tire
 tireSketch = startSketchOn("XY")
   |> startProfileAt([tireInnerDiameter / 2, tireDepth / 2], %)
-  |> lineTo([
+  |> line(endAbsolute = [
        tireOuterDiameter / 2 - bendRadius,
        tireDepth / 2
-     ], %, $edge1)
+     ], tag = $edge1)
   |> tangentialArc({ offset = -90, radius = bendRadius }, %)
-  |> lineTo([
+  |> line(endAbsolute = [
        tireOuterDiameter / 2,
        tireDepth / 2 - tireTreadOffset
-     ], %)
-  |> line([-tireTreadDepth, 0], %)
-  |> line([0, -tireTreadWidth], %)
-  |> line([tireTreadDepth, 0], %)
-  |> lineTo([
+     ])
+  |> line(end = [-tireTreadDepth, 0])
+  |> line(end = [0, -tireTreadWidth])
+  |> line(end = [tireTreadDepth, 0])
+  |> line(endAbsolute = [
        tireOuterDiameter / 2,
        -tireDepth / 2 + tireTreadOffset + tireTreadWidth
-     ], %)
-  |> line([-tireTreadDepth, 0], %)
-  |> line([0, -tireTreadWidth], %)
-  |> line([tireTreadDepth, 0], %)
-  |> lineTo([
+     ])
+  |> line(end = [-tireTreadDepth, 0])
+  |> line(end = [0, -tireTreadWidth])
+  |> line(end = [tireTreadDepth, 0])
+  |> line(endAbsolute = [
        tireOuterDiameter / 2,
        -tireDepth / 2 + bendRadius
-     ], %)
+     ])
   |> tangentialArc({ offset = -90, radius = bendRadius }, %)
-  |> lineTo([tireInnerDiameter / 2, -tireDepth / 2], %, $edge2)
-  |> close(%)
+  |> line(endAbsolute = [tireInnerDiameter / 2, -tireDepth / 2], tag = $edge2)
+  |> close()
 
 // Revolve the sketch to create the tire
 export carTire = revolve({ axis = "Y" }, tireSketch)