PyTorch geometric quantization support

CHANGELOG.rst

@@ -1,5 +1,12 @@
 Model Optimizer Changelog (Linux)
 =================================
+0.41 (2025-12-xx)
+^^^^^^^^^^^^^^^^^
+
+**Deprecations**
+
+**New Features**
+- Add support for PyTorch Geometric quantization.
 
 0.40 (2025-12-xx)
 ^^^^^^^^^^^^^^^^^

modelopt/torch/quantization/plugins/__init__.py

@@ -25,6 +25,7 @@
 - :meth:`huggingface<modelopt.torch.quantization.plugins.huggingface>`
 - :meth:`megatron<modelopt.torch.quantization.plugins.megatron>`
 - :meth:`peft<modelopt.torch.quantization.plugins.peft>`
+- :meth:`pytorch_geometric<modelopt.torch.quantization.plugins.pytorch_geometric>`
 - :meth:`transformer_engine<modelopt.torch.quantization.plugins.transformer_engine>`
 """
 
@@ -57,6 +58,9 @@
 with import_plugin("peft"):
     from .peft import *
 
+with import_plugin("torch_geometric"):
+    from .pytorch_geometric import *
+
 with import_plugin("transformer_engine"):
     from .transformer_engine import *
 

modelopt/torch/quantization/plugins/pytorch_geometric.py

@@ -0,0 +1,67 @@
+# SPDX-FileCopyrightText: Copyright (c) 2024 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""PyTorch Geometric quantization plugin.
+
+This plugin enables quantization support for PyTorch Geometric (PyG) layers by registering
+PyG's custom Linear layer with ModelOpt's quantization registry.
+
+Example:
+    >>> import modelopt.torch.quantization as mtq
+    >>> from torch_geometric.nn import GATConv
+    >>>
+    >>> # Create a model with PyG layers
+    >>> class GATModel(nn.Module):
+    ...     def __init__(self):
+    ...         super().__init__()
+    ...         self.gat1 = GATConv(10, 64, heads=4)
+    ...         self.gat2 = GATConv(64 * 4, 32, heads=1)
+    >>> model = GATModel()
+    >>> # PyG layers are now automatically quantizable!
+    >>> quantized_model = mtq.quantize(model, mtq.INT8_DEFAULT_CFG, calibrate)
+"""
+
+from torch_geometric.nn.dense.linear import Linear as PyGLinear
+
+from modelopt.torch.quantization.nn.modules.quant_module import (
+    QuantLinearConvBase,
+    QuantModuleRegistry,
+)
+from modelopt.torch.quantization.tensor_quant import QUANT_DESC_8BIT_LINEAR_WEIGHT_PER_ROW
+
+
+class QuantPyGLinear(QuantLinearConvBase):
+    """Quantized version of PyTorch Geometric's Linear layer.
+
+    PyTorch Geometric uses a custom Linear layer that is functionally equivalent to
+    torch.nn.Linear but has a different API (in_channels/out_channels instead of
+    in_features/out_features). This class enables quantization of PyG Linear layers
+    by inheriting from QuantLinearConvBase, which handles all quantization logic.
+
+    The quantization is handled automatically by the base classes:
+    - Input quantization: Handled by QuantInputBase.forward()
+    - Weight quantization: Handled by QuantLinearConvBase's dynamic weight attribute
+    - Output quantization: Handled by QuantInputBase.forward()
+
+    Note:
+        Many PyTorch Geometric layers (GCNConv, GATConv, SAGEConv, TransformerConv, etc.)
+        internally use PyG Linear layers, so registering this class enables quantization
+        for a wide range of graph neural network layers.
+    """
+
+    default_quant_desc_weight = QUANT_DESC_8BIT_LINEAR_WEIGHT_PER_ROW
+
+
+QuantModuleRegistry.register({PyGLinear: "torch_geometric.nn.dense.linear.Linear"})(QuantPyGLinear)

setup.py

@@ -79,6 +79,7 @@
         "pytest-timeout",
         "timm",
         "torchvision",
+        "torch-geometric",
         "tox>4.18",
         "tox-current-env>=0.0.12",
     ],

tests/unit/torch/quantization/plugins/test_pytorch_geometric_plugin.py

@@ -0,0 +1,185 @@
+# SPDX-FileCopyrightText: Copyright (c) 2024 NVIDIA CORPORATION & AFFILIATES. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Tests for PyTorch Geometric quantization plugin."""
+
+import pytest
+import torch
+import torch.nn as nn
+from _test_utils.torch.misc import set_seed
+from torch_geometric.nn import GATConv, GCNConv, SAGEConv, TransformerConv
+
+import modelopt.torch.quantization as mtq
+
+
+class TestPyTorchGeometricPlugin:
+    """Test PyTorch Geometric quantization support."""
+
+    @pytest.fixture(autouse=True)
+    def setup_seed(self):
+        """Set seed before each test function."""
+        set_seed()
+
+    @pytest.fixture
+    def device(self):
+        """Get test device."""
+        return torch.device("cuda" if torch.cuda.is_available() else "cpu")
+
+    def create_graph_data(self, batch_size=2, num_nodes=20, in_channels=16, device="cpu"):
+        """Create sample graph data for testing."""
+        x = torch.randn(batch_size * num_nodes, in_channels, device=device)
+        # Create batch assignment
+        batch = torch.cat([torch.full((num_nodes,), i, device=device) for i in range(batch_size)])
+
+        # Create edge indices for each graph
+        edge_list = []
+        offset = 0
+        for _ in range(batch_size):
+            # Create random edges within each graph
+            src = torch.randint(0, num_nodes, (50,), device=device) + offset
+            dst = torch.randint(0, num_nodes, (50,), device=device) + offset
+            edge_list.append(torch.stack([src, dst]))
+            offset += num_nodes
+
+        edge_index = torch.cat(edge_list, dim=1)
+        edge_attr = torch.randn(edge_index.size(1), 32, device=device)
+
+        return x, edge_index, edge_attr, batch
+
+    def test_gat_conv_quantization(self, device):
+        """Test GATConv layer quantization."""
+
+        class GATModel(nn.Module):
+            def __init__(self):
+                super().__init__()
+                self.gat1 = GATConv(16, 64, heads=4, edge_dim=32)
+                self.gat2 = GATConv(256, 32, heads=1, edge_dim=32)
+
+            def forward(self, x, edge_index, edge_attr):
+                x = torch.relu(self.gat1(x, edge_index, edge_attr))
+                return self.gat2(x, edge_index, edge_attr)
+
+        model = GATModel().to(device)
+
+        # Calibration function
+        def calibrate(m):
+            m.eval()
+            with torch.no_grad():
+                for _ in range(5):
+                    x, edge_index, edge_attr, _ = self.create_graph_data(device=device)
+                    _ = m(x, edge_index, edge_attr)
+
+        # Quantize model
+        quantized = mtq.quantize(model, mtq.INT8_DEFAULT_CFG, calibrate)
+
+        # Verify quantization
+        quantizer_count = sum(
+            1 for _, m in quantized.named_modules() if "quantizer" in type(m).__name__.lower()
+        )
+        assert quantizer_count > 0, "No quantizers were inserted"
+
+        # Test forward pass
+        x, edge_index, edge_attr, _ = self.create_graph_data(device=device)
+        with torch.no_grad():
+            output = quantized(x, edge_index, edge_attr)
+        assert output is not None
+
+    def test_multiple_layer_types(self, device):
+        """Test quantization of multiple PyG layer types."""
+
+        class MultiLayerGNN(nn.Module):
+            def __init__(self):
+                super().__init__()
+                self.gcn = GCNConv(16, 32)
+                self.sage = SAGEConv(32, 64)
+                self.transformer = TransformerConv(64, 32, heads=2)
+
+            def forward(self, x, edge_index):
+                x = torch.relu(self.gcn(x, edge_index))
+                x = torch.relu(self.sage(x, edge_index))
+                return self.transformer(x, edge_index)
+
+        model = MultiLayerGNN().to(device)
+
+        # Calibration
+        def calibrate(m):
+            m.eval()
+            with torch.no_grad():
+                for _ in range(3):
+                    x = torch.randn(50, 16, device=device)
+                    edge_index = torch.randint(0, 50, (2, 100), device=device)
+                    _ = m(x, edge_index)
+
+        # Quantize
+        quantized = mtq.quantize(model, mtq.INT8_DEFAULT_CFG, calibrate)
+
+        # Check that PyG Linear layers were quantized
+        pyg_linear_count = 0
+        for name, module in model.named_modules():
+            if hasattr(module, "lin") and "torch_geometric" in str(type(module.lin)):
+                pyg_linear_count += 1
+
+        quantizer_count = sum(
+            1 for _, m in quantized.named_modules() if "quantizer" in type(m).__name__.lower()
+        )
+
+        # Each PyG linear should have at least 2 quantizers (input, weight)
+        assert quantizer_count >= pyg_linear_count * 2, (
+            f"Expected at least {pyg_linear_count * 2} quantizers, got {quantizer_count}"
+        )
+
+    def test_quantization_accuracy(self, device):
+        """Test that quantization maintains reasonable accuracy."""
+        # Set seed for this test specifically to ensure reproducibility
+        set_seed()
+
+        model = GATConv(16, 32, heads=2, edge_dim=16).to(device)
+
+        # Create test data
+        x, edge_index, edge_attr, _ = self.create_graph_data(
+            batch_size=1, in_channels=16, device=device
+        )
+        edge_attr = edge_attr[:, :16]  # Match edge_dim
+
+        # Get original output
+        model.eval()
+        with torch.no_grad():
+            original_output = model(x, edge_index, edge_attr)
+
+        # Calibration with multiple samples for more stable quantization
+        def calibrate(m):
+            m.eval()
+            with torch.no_grad():
+                # Use multiple calibration samples for better stability
+                for _ in range(5):
+                    x_cal, edge_index_cal, edge_attr_cal, _ = self.create_graph_data(
+                        batch_size=1, in_channels=16, device=device
+                    )
+                    edge_attr_cal = edge_attr_cal[:, :16]  # Match edge_dim
+                    _ = m(x_cal, edge_index_cal, edge_attr_cal)
+
+        # Quantize
+        quantized = mtq.quantize(model, mtq.INT8_DEFAULT_CFG, calibrate)
+
+        # Get quantized output
+        with torch.no_grad():
+            quantized_output = quantized(x, edge_index, edge_attr)
+
+        # Check relative error
+        abs_diff = torch.abs(original_output - quantized_output)
+        relative_error = abs_diff / (torch.abs(original_output) + 1e-8)
+        mean_relative_error = relative_error.mean().item()
+
+        assert mean_relative_error < 0.1, f"Quantization error too large: {mean_relative_error:.2%}"