Skip to content

Tasmota v12.2.0 Patrick
Compare
Choose a tag to compare
@github-actions github-actions released this 17 Oct 08:55
· 3220 commits to master since this release
v12.2.0
4fb3d9c

Logo

RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version.

Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial. If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version.

Pay attention to the following version breaks due to dynamic settings updates:

  1. Migrate to Sonoff-Tasmota 3.9.x
  2. Migrate to Sonoff-Tasmota 4.x
  3. Migrate to Sonoff-Tasmota 5.14 (http://ota.tasmota.com/tasmota/release_5.14.0/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
  4. Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
  5. Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin)

--- Major change in parameter storage layout ---

  1. Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin)

--- Major change in internal GPIO function representation ---

  1. Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz)
  2. Upgrade to latest release (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz)

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v9.1.0 Imogen the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing v9.1.0.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.9 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

This release will be supported from ESP32/Arduino library Core version 2.0.5.

Support of ESP8266 Core versions before 2.7.4.9 and ESP32 Core versions before 2.0.5 have been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface.

Initial installation

Easy initial installation of Tasmota can be performed using the Tasmota WebInstaller.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.9.

  • tasmota.bin = The Tasmota version with most drivers for 1M+ flash. RECOMMENDED RELEASE BINARY
  • tasmota4M.bin = The Tasmota version with most drivers and filesystem for 4M+ flash.
  • tasmota-AD.bin to tasmota-VN.bin = The Tasmota version in different languages for 1M+ flash.
  • tasmota-lite.bin = The Lite version without most drivers and sensors for 1M+ flash.
  • tasmota-knx.bin = The Knx version without some features but adds KNX support for 1M+ flash.
  • tasmota-sensors.bin = The Sensors version adds more useful sensors for 1M+ flash.
  • tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash.
  • tasmota-display.bin = The Display version without Energy Monitoring but adds display support for 1M+ flash.
  • tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version for 2M+ flash.
  • tasmota-zigbee.bin = The dedicated cc25xx Zigbee Bridge version for 4M+ flash.

Above binaries are also available as gzipped version allowing faster uploads.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

ESP32, ESP32-C3, ESP32-S2 and ESP32-S3 based

The following binary downloads have been compiled with ESP32/Arduino library core version 2.0.5.

  • tasmota32.bin = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. RECOMMENDED RELEASE BINARY
  • tasmota32xy.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3/S2/S3 and 4M+ flash.
  • tasmota32xycdc.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3/S2/S3 with serial over embedded USB CDC only and 4M+ flash.
  • tasmota32solo1.bin = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
  • tasmota32-AD.bin to tasmota32-VN.bin = The Tasmota version in different languages for 4M+ flash.
  • tasmota32-bluetooth.bin = The Bluetooth version adds BLE support for 4M+ flash.
  • tasmota32-display.bin = The Display version without Energy Monitoring but adds display support for 4M+ flash.
  • tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash.
  • tasmota32-lvgl.bin = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash.
  • tasmota32-nspanel.bin = The Sonoff NSPanel Smart Scene Wall Switch version with HASPmota display support.
  • tasmota32-webcam.bin = The Webcam version adds webcam support for 4M+ flash.
  • tasmota32-zbbridgepro.bin - The Sonoff Zigbee Bridge Pro version with CC2652P firmware load support.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota32/release/tasmota32.bin

Additional information

List of embedded modules.

Complete list of available feature and sensors.

Changelog v12.2.0 Patrick

Added

  • Command SetOption46 0..255 to add 0..255 * 10 milliseconds power on delay before initializing I/O #15438
  • Command SetOption146 1 to enable display of ESP32 internal temperature
  • Command DspSpeed 2..127 to control message rotation speed on display of POWR3xxD and THR3xxD
  • Command DspLine<1|2> <index>,<unit>,<index>,<unit>,... to select message(s) on display of POWR3xxD and THR3xxD
  • Command SspmPowerOnState<relay> 0|1|2 to set Sonoff SPM 4Relay module v1.2.0 power on state overruling tasmota global power on state. 0 = Off, 1 = On, 2 = Saved state #13447
  • Command StatusRetain 0|1 #11109
  • Command Sunrise 0..3 to select sunrise dawn angle between Normal, Civil, Nautical or Astronomical #16795
  • Command UrlFetch <url> to download a file to filesystem
  • Command WcClock 10..200 set webcam clock in MHz. Default is 20
  • Support for Shelly Plus 2PM
  • Support for SGP40 gas and air quality sensor #16341
  • Support for Modbus writing using ModbusBridge by JeroenSt #16351
  • Support for DFRobot SEN0390 V30B ambient light sensor #16105
  • Support for QMC5883L magnetic induction sensor by Helge Scheunemann #16714
  • Support for Modbus Energy Monitoring devices using a rule file. See xnrg_29_modbus.ino for more information
  • Support for flowrate meter flow amount/duration, show values in table format #16385
  • Support of optional file calib.dat on ADE7953 based energy monitors like Shelly EM #16486
  • Zigbee device plugin mechanism with commands ZbLoad, ZbUnload and ZbLoadDump #16252
  • Zigbee basic support for Green Power #16407
  • Zigbee friendly names per endpoint
  • Zigbee Alexa/Hue emulation, support multiple switches on separate endpoints #16718
  • Support for Ethernet in ESP32 safeboot firmware #16388
  • ESP32-S3 support for internal temperature sensor
  • ESP32-S2 and ESP32-S3 touch button support
  • ESP32 Automatically resize FS to max flash size at initial boot #16838
  • Berry has persistent MQTT subscriptions: auto-subscribe at (re)connection
  • Berry automated solidification of code
  • LVGL/HASPmota add tiny "pixel perfect" fonts for small screens #16758
  • HASPmota support for TTF fonts #16759

Changed

  • IRremoteESP8266 library from v2.8.2 to v2.8.4
  • TasmotaModbus library from v3.5.0 to v3.6.0 #16351
  • ESP32 NimBLE library from v1.3.6 to v1.4.0
  • ESP32 LVGL library from v8.3.0 to v8.3.2
  • ESP32 Tasmota Core32 from 2.0.4.1 to 2.0.5
  • Command SerialBuffer raise max allowed buffer size to 2048 characters #16374
  • Increase serial console input buffer size from 520 to 800
  • Button debouncing V3 by adopting switch debounce code #16339
  • Thermostat max allowed temperature from 100 to 200C #16363
  • Shelly EM swap internal channels A and B to match P1 and P2 #16486
  • Shelly EM phase calibration set to 200 (from 0) #16486
  • Zigbee report unprocessed attributes
  • ESP32 Increase number of button GPIOs from 8 to 28 #16518
  • ESP32 Platformio one Platform for all Tasmota frameworks Core32 2.0.5 #16644

Fixed

  • RTC not detected when lights are present #16242
  • DNS lookup for .local domains #16273
  • Button response delay regression from v12.0.2.4 #16319
  • Lost module name in GUI regression from v12.0.2.4 - 20220803 #16324
  • Removed whitespace from JSON values with no decimals #16365
  • ESP32 touch button multi-press and hold detection #16596
Assets 172
Loading