CRI-O Packaging

The intention of this project is to encapsulate CRI-O's packaging efforts into a dedicated repository, following official Kubernetes guidelines by using the openSUSE Build Service (OBS).

• Motivation
• Project Layout
  • Stable Versions
  • Prereleases
• Usage
  • Available Streams
    • Define the Kubernetes version and used CRI-O stream
  • Distributions using rpm packages
    • Add the Kubernetes repository
    • Add the CRI-O repository
    • Install package dependencies from the official repositories
    • Install the packages
    • Start CRI-O
    • Bootstrap a cluster
  • Distributions using deb packages
    • Install the dependencies for adding repositories
    • Add the Kubernetes repository
    • Add the CRI-O repository
    • Install the packages
    • Start CRI-O
    • Bootstrap a cluster
• Publishing
• Using the static binary bundles directly

Motivation

The following resources are great to understand the motivation behind the latest deb and rpm packaging efforts within the CRI-O and Kubernetes community:

• CRI-O is moving towards pkgs.k8s.io:

  https://k8s.io/blog/2023/10/10/cri-o-community-package-infrastructure

• Kubernetes Legacy Package Repositories Will Be Frozen On September 13, 2023:

  https://kubernetes.io/blog/2023/08/31/legacy-package-repository-deprecation/

• pkgs.k8s.io: Introducing Kubernetes Community-Owned Package Repositories:

  https://kubernetes.io/blog/2023/08/15/pkgs-k8s-io-introduction/

• Installing Kubernetes via kubeadm:

  https://kubernetes.io/docs/setup/production-environment/tools/kubeadm/install-kubeadm/#dpkg-k8s-package-repo

Project Layout

CRI-O uses the same basic project layout in OBS as Kubernetes, but lives in a dedicated umbrella subproject called isv:kubernetes:addons:cri-o.

This project contains a bunch of other subprojects:

Stable Versions

• isv:kubernetes:addons:cri-o:stable: Stable Packages (Umbrella)
  • isv:kubernetes:addons:cri-o:stable:v1.32: v1.32.z tags (Stable)
    • isv:kubernetes:addons:cri-o:stable:v1.32:build: v1.32.z tags (Builder)
  • isv:kubernetes:addons:cri-o:stable:v1.31: v1.31.z tags (Stable)
    • isv:kubernetes:addons:cri-o:stable:v1.31:build: v1.31.z tags (Builder)
  • isv:kubernetes:addons:cri-o:stable:v1.30: v1.30.z tags (Stable)
    • isv:kubernetes:addons:cri-o:stable:v1.30:build: v1.30.z tags (Builder)
  • isv:kubernetes:addons:cri-o:stable:v1.29: v1.29.z tags (Stable)
    • isv:kubernetes:addons:cri-o:stable:v1.29:build: v1.29.z tags (Builder)
  • End of life:
    • isv:kubernetes:addons:cri-o:stable:v1.28: v1.28.z tags (Stable)
      • isv:kubernetes:addons:cri-o:stable:v1.28:build: v1.28.z tags (Builder)

Prereleases

• isv:kubernetes:addons:cri-o:prerelease: Prerelease Packages (Umbrella)
  • isv:kubernetes:addons:cri-o:prerelease:main: main branch (Prerelease)
    • isv:kubernetes:addons:cri-o:prerelease:main:build: main branch (Builder)
  • isv:kubernetes:addons:cri-o:prerelease:v1.32: release-1.32 branch (Prerelease)
    • isv:kubernetes:addons:cri-o:prerelease:v1.32:build: release-1.32 branch (Builder)
  • isv:kubernetes:addons:cri-o:prerelease:v1.31: release-1.31 branch (Prerelease)
    • isv:kubernetes:addons:cri-o:prerelease:v1.31:build: release-1.31 branch (Builder)
  • isv:kubernetes:addons:cri-o:prerelease:v1.30: release-1.30 branch (Prerelease)
    • isv:kubernetes:addons:cri-o:prerelease:v1.30:build: release-1.30 branch (Builder)
  • isv:kubernetes:addons:cri-o:prerelease:v1.29: release-1.29 branch (Prerelease)
    • isv:kubernetes:addons:cri-o:prerelease:v1.29:build: release-1.29 branch (Builder)
  • End of life:
    • isv:kubernetes:addons:cri-o:prerelease:v1.28: release-1.28 branch (Prerelease)
      • isv:kubernetes:addons:cri-o:prerelease:v1.28:build: release-1.28 branch (Builder)

The prerelease projects are mainly used for release-x.y branches as well as the main branch of CRI-O. The stable projects are used for tagged releases. The build projects are the builders for each project to be published, while the main repositories for them are on top. For example, the builder project for main is:

• isv:kubernetes:addons:cri-o:prerelease:main:build

But end-users will consume:

• isv:kubernetes:addons:cri-o:prerelease:main

All packages are based on the static binary bundles provided by the CRI-O CI.

Usage

Available Streams

Define the Kubernetes version and used CRI-O stream

KUBERNETES_VERSION=v1.31
CRIO_VERSION=v1.31

Distributions using rpm packages

Add the Kubernetes repository

cat <<EOF | tee /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://pkgs.k8s.io/core:/stable:/$KUBERNETES_VERSION/rpm/
enabled=1
gpgcheck=1
gpgkey=https://pkgs.k8s.io/core:/stable:/$KUBERNETES_VERSION/rpm/repodata/repomd.xml.key
EOF

Add the CRI-O repository

cat <<EOF | tee /etc/yum.repos.d/cri-o.repo
[cri-o]
name=CRI-O
baseurl=https://pkgs.k8s.io/addons:/cri-o:/stable:/$CRIO_VERSION/rpm/
enabled=1
gpgcheck=1
gpgkey=https://pkgs.k8s.io/addons:/cri-o:/stable:/$CRIO_VERSION/rpm/repodata/repomd.xml.key
EOF

Install package dependencies from the official repositories

dnf install -y container-selinux

Install the packages

dnf install -y cri-o kubelet kubeadm kubectl

Start CRI-O

systemctl start crio.service

Bootstrap a cluster

swapoff -a
modprobe br_netfilter
sysctl -w net.ipv4.ip_forward=1

kubeadm init

Distributions using deb packages

Install the dependencies for adding repositories

apt-get update
apt-get install -y software-properties-common curl

Add the Kubernetes repository

curl -fsSL https://pkgs.k8s.io/core:/stable:/$KUBERNETES_VERSION/deb/Release.key |
    gpg --dearmor -o /etc/apt/keyrings/kubernetes-apt-keyring.gpg

echo "deb [signed-by=/etc/apt/keyrings/kubernetes-apt-keyring.gpg] https://pkgs.k8s.io/core:/stable:/$KUBERNETES_VERSION/deb/ /" |
    tee /etc/apt/sources.list.d/kubernetes.list

Add the CRI-O repository

curl -fsSL https://pkgs.k8s.io/addons:/cri-o:/stable:/$CRIO_VERSION/deb/Release.key |
    gpg --dearmor -o /etc/apt/keyrings/cri-o-apt-keyring.gpg

echo "deb [signed-by=/etc/apt/keyrings/cri-o-apt-keyring.gpg] https://pkgs.k8s.io/addons:/cri-o:/stable:/$CRIO_VERSION/deb/ /" |
    tee /etc/apt/sources.list.d/cri-o.list

Install the packages

apt-get update
apt-get install -y cri-o kubelet kubeadm kubectl

Start CRI-O

systemctl start crio.service

Bootstrap a cluster

swapoff -a
modprobe br_netfilter
sysctl -w net.ipv4.ip_forward=1

kubeadm init

Publishing

The obs GitHub action workflow can be used to manually trigger release for a CRI-O tag, a release-x.y branch or main. There is a daily cron scheduled for release branches, but it is also possible to trigger the package creation at a certain point in time. The obs pipeline will:

1. Build a static binary bundle which contains all necessary files.
2. Push the bundle and spec file into the corresponding build project.
3. Wait for the OBS builders to finish.
4. Run package installation and usage tests for Kubernetes and available architectures for various Distributions.
5. Publish the packages into the top level project.

Using the static binary bundles directly

We always recommend to use deb and rpm packages over the static binary bundle, but for some reason packages may not be a good fit. Every run in the obs GitHub workflow will publish a static binary bundle on our Google Cloud Storage Bucket, which contains all necessary binaries and configurations.

This means that the latest available CRI-O main commit can be installed via our convenience script:

> curl https://raw.githubusercontent.com/cri-o/packaging/main/get | bash

The script automatically verifies the uploaded sigstore signatures as well, if the local system has cosign available in its $PATH. The same applies to the SPDX based bill of materials (SBOM), which gets automatically verified if the bom tool is in $PATH.

Besides amd64, we also support the arm64, ppc64le and s390x bit architectures. This can be selected via the script, too:

curl https://raw.githubusercontent.com/cri-o/packaging/main/get | bash -s -- -a arm64

It is also possible to select a specific git SHA or tag by:

curl https://raw.githubusercontent.com/cri-o/packaging/main/get | bash -s -- -t v1.31.0

The above script resolves to the download URL of the static binary bundle tarball matching the format:

https://storage.googleapis.com/cri-o/artifacts/cri-o.$ARCH.$REV.tar.gz

Where $ARCH can be amd64, arm64, ppc64le or s390x and $REV can be any git SHA or tag.

We also provide a Software Bill of Materials (SBOM) in the SPDX format for each bundle. The SBOM is available at the same URL like the bundle itself, but suffixed with .spdx:

https://storage.googleapis.com/cri-o/artifacts/cri-o.$ARCH.$REV.tar.gz.spdx