This repository contains a collection of TTP templates.
If you solved a problem using TTP and feel that your work can be useful to other people, feel free to raise an issue or submit pull request to include your template(s) in this repository. Refer to Contribute Guide for details.
Documentation: https://dmulyalin.github.io/ttp_templates/
Repository: https://github.com/dmulyalin/ttp_templates
TTP: https://ttp.readthedocs.io/
From PyPi:
pip install ttp-templates
or latest from GitHub master branch (need Git installed on the system):
pip install git+https://github.com/dmulyalin/ttp_templates.git
This example demonstrates how to parse Test Platform output for show run | sec interface command using platform/test_platform_show_run_pipe_sec_interface.txt template.
Code
from ttp_templates import parse_output
import pprint
data = """
interface GigabitEthernet1/3.251
description Customer #32148
encapsulation dot1q 251
ip address 172.16.33.10 255.255.255.128
shutdown
!
interface GigabitEthernet1/3.251
description Customer #32148
encapsulation dot1q 251
ip address 172.16.33.10 255.255.255.128
shutdown
"""
result = parse_output(
data=data,
platform="Test Platform",
command="show run | sec interface"
)
pprint.pprint(result)
# prints:
# [[[{'description': 'Customer #32148',
# 'disabled': True,
# 'dot1q': '251',
# 'interface': 'GigabitEthernet1/3.251',
# 'ip': '172.16.33.10',
# 'mask': '255.255.255.128'},
# {'description': 'Customer #32148',
# 'disabled': True,
# 'dot1q': '251',
# 'interface': 'GigabitEthernet1/3.251',
# 'ip': '172.16.33.10',
# 'mask': '255.255.255.128'}]]]Sample code to parse Cisco IOS output in a structure compatible with ietf-interfaces YANG module.
Code
from ttp_templates import get_template
from ttp import ttp
import pprint
data1 = """
interface GigabitEthernet1/3.251
description Customer #32148
encapsulation dot1q 251
ip address 172.16.33.10 255.255.255.128
shutdown
!
interface GigabitEthernet1/4
description vCPEs access control
ip address 172.16.33.10 255.255.255.128
!
"""
data2 = """
interface GigabitEthernet1/5
description Works data
ip mtu 9000
!
interface GigabitEthernet1/7
description Works data v6
ipv6 address 2001::1/64
ipv6 address 2001:1::1/64
"""
template = get_template(yang="ietf-interfaces", platform="cisco_ios")
parser = ttp(template=template)
parser.add_input(data1)
parser.add_input(data2)
parser.parse()
res = parser.result()
pprint.pprint(res)
# prints:
# [{'comment': '',
# 'exception': {},
# 'result': [{'ietf-interfaces:interfaces': {'interface': [{'admin-status': 'down',
# 'description': 'Customer '
# '#32148',
# 'enabled': False,
# 'ietf-ip:ipv4': {'address': [{'ip': '172.16.33.10',
# 'netmask': '255.255.255.128',
# 'origin': 'static'}]},
# 'if-index': 1,
# 'link-up-down-trap-enable': 'enabled',
# 'name': 'GigabitEthernet1/3.251',
# 'oper-status': 'unknown',
# 'statistics': {'discontinuity-time': '1970-01-01T00:00:00+00:00'},
# 'type': 'iana-if-type:ethernetCsmacd'},
# {'admin-status': 'up',
# 'description': 'vCPEs '
# 'access '
# 'control',
# 'enabled': True,
# 'ietf-ip:ipv4': {'address': [{'ip': '172.16.33.10',
# 'netmask': '255.255.255.128',
# 'origin': 'static'}]},
# 'if-index': 1,
# 'link-up-down-trap-enable': 'enabled',
# 'name': 'GigabitEthernet1/4',
# 'oper-status': 'unknown',
# 'statistics': {'discontinuity-time': '1970-01-01T00:00:00+00:00'},
# 'type': 'iana-if-type:ethernetCsmacd'}]}},
# {'ietf-interfaces:interfaces': {'interface': [{'admin-status': 'up',
# 'description': 'Works '
# 'data',
# 'enabled': True,
# 'ietf-ip:ipv4': {'mtu': 9000},
# 'if-index': 1,
# 'link-up-down-trap-enable': 'enabled',
# 'name': 'GigabitEthernet1/5',
# 'oper-status': 'unknown',
# 'statistics': {'discontinuity-time': '1970-01-01T00:00:00+00:00'},
# 'type': 'iana-if-type:ethernetCsmacd'},
# {'admin-status': 'up',
# 'description': 'Works '
# 'data '
# 'v6',
# 'enabled': True,
# 'ietf-ip:ipv6': {'address': [{'ip': '2001::1',
# 'origin': 'static',
# 'prefix-length': 64},
# {'ip': '2001:1::1',
# 'origin': 'static',
# 'prefix-length': 64}]},
# 'if-index': 1,
# 'link-up-down-trap-enable': 'enabled',
# 'name': 'GigabitEthernet1/7',
# 'oper-status': 'unknown',
# 'statistics': {'discontinuity-time': '1970-01-01T00:00:00+00:00'},
# 'type': 'iana-if-type:ethernetCsmacd'}]}}],
# 'valid': {0: True, 1: True}}]This repository contains three collections of templates corresponding to folder names:
platformcollection - mimics ntc-templates API and follows same naming ruleyangcollection - contains templates capable of producing YANG compatible structures out of text datamisccollection - miscellaneous templates for various use cases organized in folders
{{ vendor_os }}_{{ command_with_underscores }}.txt - lower case only.
Naming rules details:
- All space symbols
' 'replaced with underscores. - Pipe symbol
|replaced withpipein template name. For example, template to parse Cisco IOSshow run | section interfacecommand output must be namedcisco_ios_show_running_config_pipe_section_interface.txt - Dash symbols
-replaced with underscores. For example, template to parse Huaweidisplay current-configuration interfacecommand output must be namedhuawei_display_current_configuration_interface.txt
{{ YANG module name }}_{{ platform_name }}.txt - lower case only
Naming rules details:
- All space symbols
' 'replaced with underscore. - Dash symbol
-does not replaced with underscore. For example, template to produce output compatible with openconfig-lldp YANG model for Cisco IOS must be namedopenconfig-lldp_cisco_xr.txt
{{ usecase folder }}/{{ template name }}.txt - upper or lower case
Naming rules details:
- Nothing replaced with anything, provided template name used as is.
List of resources with TTP templates:
- TTP SrosParser - https://pypi.org/project/ttp-sros-parser/ by h4ndzdatm0ld
- Template for parsing "show run" for Cisco IOS - https://github.com/tbotnz/ios-show-run-ttp by tbotnz
- Template for Cisco ASA configuration - https://gist.github.com/consentfactory/85872fc83453d1735b15aed3e47a9763 by consentfactory