Bszutu 1

README.md

@@ -1,14 +1,17 @@
 # wupws
 simple shell script that parses current observations from a weather underground station and posts to pwsweather.com.  Needed so Rachio smart irrigation controller can use nearby weather underground data to adjust watering schedule.
 
-Mandatory Linux Tools Required:
-- jq
+Updated 2017-01-07 to add wu-pws-grep.sh in order to remove the dependency on jq so it can run on busybox or any other linux
+Also add mkdir -p to make sure the weather tmp folder is created if does not exist
+
+Mandatory Linux Tools Required:  
+- jq   (if you are using wu-pws.sh, jq not required for wu-pws-grep.sh)
 - wget
 
 Mandatory variables to set in the script (more info in the .sh):
 - WORKINGDIR=/home/ABC123
 - WUAPI={your weather underground API key - no braces}
-- WUPWS={"your weather underground station identifier - no braces - yes quotes"}
+- WUPWS={"your weather underground station identifier - no braces - yes quotes - prefix with "pws:"}
 - PWSID={your pwsweather.com station ID}
 - PWSPASS={your pwsweather.com password}
 

wu-pws-grep.sh

@@ -0,0 +1,112 @@
+#!/bin/bash
+
+## JH: v1.0 - Weather Underground to pwsweather.com script test
+## BKS: v.1.1 - remove dependency for jq and test on busybox so it will run on openwrt
+
+WORKINGDIR=/tmp/pws
+
+# this is to handle busybox to make sure the working directory exist after a reboot
+mkdir -p $WORKINGDIR
+
+# Wunderground API key
+# Register for a free Stratus plan here: https://www.wunderground.com/weather/api
+WUAPI=PutYourWUAPIKeyHere
+
+# Wunderground PWS to pull weather from
+# Navigate to your preferred weather station on Weather Underground and pull the pws:XXXXXXXXXX from the URL
+# ex. https://www.wunderground.com/cgi-bin/findweather/getForecast?query=pws:KFLLAKEW61&MR=1
+# ex. WUPWS would be the query value - "pws:KFLLAKEW61"
+#WUPWS="pws:KFLLAKEW53"
+WUPWS="pws:StationIDhereAndKeeptheQuotes"
+
+#PWS station ID - sign up and create a station at pwsweather.com
+PWSID=PutYourPWSStationIDhere
+
+#PWS password - password for pwsweather.com
+PWSPASS=PutYourPWSPasswordHere
+
+#============================================================
+#=
+#=      NOT NECESSARY TO CHANGE ANY LINES BELOW
+#=
+#============================================================
+
+# Construct & Execute Weather Underground API call
+WUJSON=http://api.wunderground.com/api/$WUAPI/conditions/q/$WUPWS\.json
+echo "Grabbing JSON using the following URL: $WUJSON"
+echo ""
+wget -O $WORKINGDIR/wu.json $WUJSON
+
+# ALL json extractions below REQUIRE the jq cmd line tool - on Ubuntu 'apt-get install jq'
+#
+# extract observation time and convert to UTC
+# jq .current_observation.observation_epoch wu.json |tr -d '"'
+# TZ=UTC date -d @1459187921 +'%Y-%m-%d+%H:%M:%S'|sed 's/:/%3A/g'
+PWSDATEUTC=$(TZ=UTC date -d @$(grep "observation_epoch" $WORKINGDIR/wu.json | cut -d ":" -f 2 | tr -d '"' | tr -d ",") +'%Y-%m-%d+%H:%M:%S'|sed 's/:/%3A/g')
+echo "PWSDATEUTC=$PWSDATEUTC"
+
+# extract winddir
+PWSWINDDIR=$(grep "wind_degrees" $WORKINGDIR/wu.json | cut -d ":" -f 2 | tr -d '"' | tr -d ',')
+echo "PWSWINDDIR=$PWSWINDDIR"
+
+# extract windspeed
+PWSWINDSPEEDMPH=$(grep "wind"_mph $WORKINGDIR/wu.json | cut -d ":" -f 2 | tr -d '"' | tr -d ',')
+echo "PWSWINDSPEEDMPH=$PWSWINDSPEEDMPH"
+
+# extract windgustmph
+PWSWINDGUSTMPH=$(grep "wind_gust_mph" $WORKINGDIR/wu.json | cut -d ":" -f 2 | tr -d '"' | tr -d ',')
+echo "PWSWINDGUSTMPH=$PWSWINDGUSTMPH"
+
+# extract tempf
+PWSTEMPF=$(grep "temp_f" $WORKINGDIR/wu.json | cut -d ":" -f 2 | tr -d '"' | tr -d ',')
+echo "PWSTEMPF=$PWSTEMPF"
+
+# extract hourly rainin - Hourly rain in inches
+PWSRAININ=$(grep "precip_1hr_in" $WORKINGDIR/wu.json | cut -d ":" -f 2 | tr -d '"' | tr -d ',')
+echo "PWSRAININ=$PWSRAININ"
+
+
+# extract daily rainin - Daily rain in inches
+PWSDAILYRAININ=$(grep "precip_today_in" $WORKINGDIR/wu.json | cut -d ":" -f 2 | tr -d '"' | tr -d ',')
+echo "PWSDAILYRAININ=$PWSDAILYRAININ"
+
+# extract baromin - Barometric pressure in inches
+PWSBAROMIN=$(grep "pressure_in" $WORKINGDIR/wu.json | cut -d ":" -f 2 | tr -d '"' | tr -d ',')
+echo "PWSBAROMIN=$PWSBAROMIN"
+
+# extract dewptf - Dew point in degrees f
+PWSDEWPTF=$(grep "dewpoint_f" $WORKINGDIR/wu.json | cut -d ":" -f 2 | tr -d '"' | tr -d ',')
+echo "PWSDEWPTF=$PWSDEWPTF"
+
+# extract humidity - in percent
+PWSHUMIDITY=$(grep "relative_humidity" $WORKINGDIR/wu.json | cut -d ":" -f 2 | tr -d '"' | tr -d ',' |tr -d '%')
+echo "PWSHUMIDITY=$PWSHUMIDITY"
+
+# extract solarradiation
+PWSSOLARRADIATION=$(grep "solarradiation" $WORKINGDIR/wu.json | cut -d ":" -f 2 | tr -d '"' | tr -d ','|tr -d '-')
+echo "PWSSOLARRADIATION=$PWSSOLARRADIATION"
+
+# extract UV
+PWSUV=$(grep "UV" $WORKINGDIR/wu.json | cut -d "," -f 1 | cut -d ":" -f 2 | tr -d '"' | tr -d ',')
+echo "PWSUV=$PWSUV"
+
+# construct PWS weather POST data string
+
+PWSPOST="ID=$PWSID&PASSWORD=$PWSPASS&dateutc=$PWSDATEUTC&winddir=$PWSWINDDIR&windspeedmph=$PWSWINDSPEEDMPH&windgustmph=$PWSWINDGUSTMPH&tempf=$PWSTEMPF&rainin=$PWSRAININ&dailyrainin=$PWSDAILYRAININ&baromin=$PWSBAROMIN&dewptf=$PWSDEWPTF&humidity=$PWSHUMIDITY&solarradiation=$PWSSOLARRADIATION&UV=$PWSUV&softwaretype=wu_pws_ver1.0&action=updateraw"
+#echo $PWSPOST
+
+RESULT=$(wget -O /dev/null --post-data=$PWSPOST http://www.pwsweather.com/pwsupdate/pwsupdate.php)
+echo wget -O /dev/null --post-data=$PWSPOST http://www.pwsweather.com/pwsupdate/pwsupdate.php
+
+# retains 10 backup cycles for debugging
+rm $WORKINGDIR/wu.json.10
+mv $WORKINGDIR/wu.json.9 $WORKINGDIR/wu.json.10
+mv $WORKINGDIR/wu.json.8 $WORKINGDIR/wu.json.9
+mv $WORKINGDIR/wu.json.7 $WORKINGDIR/wu.json.8
+mv $WORKINGDIR/wu.json.6 $WORKINGDIR/wu.json.7
+mv $WORKINGDIR/wu.json.5 $WORKINGDIR/wu.json.6
+mv $WORKINGDIR/wu.json.4 $WORKINGDIR/wu.json.5
+mv $WORKINGDIR/wu.json.3 $WORKINGDIR/wu.json.4
+mv $WORKINGDIR/wu.json.2 $WORKINGDIR/wu.json.3
+mv $WORKINGDIR/wu.json.1 $WORKINGDIR/wu.json.2
+mv $WORKINGDIR/wu.json $WORKINGDIR/wu.json.1