OrangeFox Recovery for Pixel 10 Pro (blazer)

Maintainer: LeeGarChat

Version: R11.3 (based on RANCH 14.1)

Status: WORK IN PROGRESS — Ported from Pixel 8 Pro (husky) device tree

---

✅ Hardware Addresses VERIFIED (from actual Pixel 10 Pro device)

Component	Address	Source
UFS Controller	3c400000.ufs	/sys/devices/platform/3c400000.ufs
USB Controller	c400000.dwc3	/sys/devices/platform/simple_usb_bus/c450000.usb3/c400000.dwc3
Backlight	/sys/devices/platform/sswrp_dpu@ec00000/efd8000.dsi2host/efd8000.dsi2host.0/backlight/panel0-backlight	sysfs dump
Touch Module	syna_touch.ko	lsmod output

Block Device Names (from /dev/block/by-name/)

• Standard A/B partition scheme with slots _a and _b
• super partition at /dev/block/platform/3c400000.ufs/by-name/super
• userdata at /dev/block/platform/3c400000.ufs/by-name/userdata

---

⚠️ CRITICAL: Items Still Requiring Verification

This tree was ported from the husky (Pixel 8 Pro / zuma / Tensor G3) tree. The Pixel 10 Pro uses the deepspace platform (Tensor G5) which is TSMC-fabricated (not Samsung Exynos like zuma).

Search for TODO_VERIFY across all files to find every item that needs attention.

Hardware Updates Made

• ✅ UFS controller: Updated from 13200000.ufs (zuma) to 3c400000.ufs (deepspace)
• ✅ USB controller: Updated from 11210000.dwc3 (zuma) to c400000.dwc3 (deepspace)
• ✅ fstab block paths: Updated to use 3c400000.ufs

Still TODO

• Touch modules: syna_touch identified but needs verification in recovery
• Kernel and DTB: Prebuilts must be extracted from actual blazer firmware
• Screen resolution: Verify TARGET_SCREEN_WIDTH/HEIGHT
• Brightness values: Verify TW_MAX_BRIGHTNESS matches actual hardware
• Super partition size: Verify OF_DYNAMIC_FULL_SIZE matches actual device

---

What Works (Expected, inherited from husky)

• MTP (Media Transfer Protocol)
• ADB Sideload
• ADB (Android Debug Bridge)
• Reflash Recovery (custom code)
• Flashing ROM
• Flashing ZIP files
• Slot Switcher (BootControl)

---

Known Issues (Expected)

Major

1. /data decryption: Not supported (same as husky). Use DFE.
2. USB Host / OTG: Likely same DTB limitation as husky.
3. Touch: Will NOT work until correct touch kernel modules are identified and loaded.

Minor

• Flashlight: May not work.
• Vibration: May not work.

---

Build Information

• OrangeFox Version: R11.3
• Base: RANCH 14.1
• Device: Google Pixel 10 Pro (blazer)
• Platform: deepspace (Tensor G5)
• Android: 16 (API 36)
• Maintainer: LeeGarChat

---

Device Family

This tree targets blazer (Pixel 10 Pro). Related codenames from the factory image:

• blazer — Pixel 10 Pro
• mustang — TBD
• frankel — TBD
• rango — TBD
• deepspace — SoC/platform name

---

Ported from twrp_device_google_husky