Skip to content

mcmire/dotfiles

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

dotfiles

This repo is designed to set up a Mac for development. It is updated very frequently!

Terminal-based tools

  • zsh — the new standard in shells
  • iTerm — a more capable terminal emulator
  • tmux — corral projects and their many sessions
  • Neovim — a slimmer and more modern fork of Vim (More details →)
  • Git — the king of version control software
  • asdf — the one language version manager to rule them all
  • autojump — no more setting up aliases to jump directly to projects
  • fzf — a faster and more pleasant version of Ctrl-R

Applications

  • Chrome — still has the best devtools
  • 1Password — the easiest password manager
  • Obsidian — create your own personal knowledge base
  • Dash — search documentation for all kinds of programming languages
  • Moom — control placement of your windows using keybindings
  • Stay — remembers window placement when connecting and discnnnecting monitors
  • Numi — a fancy calculator app without any fancy buttons

Neovim configuration

Neovim is preconfigured with the following features:

Handy plugins

  • VimPlug — a fast plugin manager
  • NERDTree — a simple file tree
  • Ctrl-P — a fuzzy file finder for quickly jumping to files
  • Ack + Ag — a way to search across a project lightning quick
  • NERDCommenter — an easy way to comment and uncomment lines
  • SuperTab — an autocompleter that stays out of your way
  • CoC — brings Vim closer to an IDE-like experience with autocompletion, documentation, linting, and formatting (works best with language servers like TypeScript)
  • AutoPairs — adds matching parentheses, braces, brackets, and quotes as you type them (but can be toggled on/off as needed)
  • endwise — like AutoPairs but for Ruby blocks
  • indentLine — adds vertical lines at regular indentation levels so that you can quickly tell if a line is misindented
  • surround — a way to quickly surround text with quotes, parentheses, braces, etc.
  • togglecursor — makes insert and command modes more obvious by switching the cursor when switching modes
  • FastFold — makes it actually possible to use foldmethod=syntax in Ruby files without slowing Vim down to a halt
  • ...and more!

Sensible defaults

  • Lines in files of most filetypes are hard-wrapped to 80 characters
  • The system clipboard is used for copying/pasting
  • Incremental search provides more feedback than the default search behavior
  • Rakefile, Gemfile, and *.gemspec files are highlighted as Ruby files
  • .jshintrc and .eslintrc are highlighted as JSON files

Sensible mappings

  • , is the leader key (so no finger gymnastics)
  • Ctrl-{H,J,K,L} lets you navigate to windows in Vim and to panes in tmux
  • j and k always place the cursor one line below or above, regardless of whether lines are being wrapped
  • % bounces between the start and end of blocks (in languages that make it possible to do so)
  • < and > no longer lose drop the selection when indenting a selected block of text
  • Q lets you reformat paragraphs

macOS customizations

  • Use ~/Screenshots to save screenshots instead of the desktop
  • Disable auto-capitalization, smart characters, auto-correct, spell check, and grammar check
  • Disable press-and-hold for keys
  • Speed up keyboard repeat rate
  • Use Caps Lock for Escape (for Vim)
  • Make the Function key functional
  • Disable most trackpad gestures
  • Enable filename extensions by default in Finder
  • Use plain text mode for TextEdit

App customizations

  • Allow tmux to access the clipboard by default
  • Configure Moom so you can fully maximize any window with Cmd-F

Automations

  • Back up Obsidian to GitHub automatically
  • Back up files to rsync.net automatically

How do I use these dotfiles?

Step 1: Fork this repo

You might be tempted to clone this repo, but the author feels that the best development environment is the one you control. Therefore, it is recommended to fork this repo so that you can make changes to this configuration at will and push them up to your own account. Scroll up to the top and click that Fork button in the top-right corner now!

Step 2: Clone your fork

At this point, you should be reading this README from your own fork. Now open a terminal and clone your fork in a convenient place you'll remember, such as the same place you store code:

cd ~/your-code-directory
git clone [email protected]:yourusername/dotfiles.git

(You may need to install the macOS developer tools to run git. If that's the case, accept the prompt that appears and then re-run the second command above.)

Step 3: Clear the way

If you already have some amount of dotfiles in your home directory, you will want to back them up and move them out of the way before you go any further. For instance:

mv ~/.vimrc ~/.vimrc.old
mv ~/.zshrc ~/.zshrc.old
mv ~/.zshenv ~/.zshenv.old

Step 4: Run the install script

Next, you'll want to run the script that comes bundled with this repo. This script will install all of the files in this repo as symlinks into your home directory. This has the advantage of allowing you to edit them through your forked repo location. Run the script like so, supplying your Git name and email:

bin/manage install --git-name "Your Name" --git-email "[email protected]" --dry-run

Note the use of --dry-run on the end. This will tell you what would have been installed, but nothing has happened yet! Take a moment to look over the output and verify that it makes sense. If it makes sense, then run it again without --dry-run:

bin/manage install --git-name "Your Name" --git-email "[email protected]"

Step 5: Verify the installation

Open iTerm and make sure that everything is good. It should look like this:

Example of iTerm

Step 6: Install tmux plugins

Launch tmux by running this from the terminal:

tmux

Press Ctrl + Space followed by Shift + I. After a brief delay, plugins will be installed that are necessary for tmux for fully work.

Step 7: Install Vim plugins

Launch Vim by running this from the terminal:

vi

You may get a warning. If that happens, then type:

:PlugInstall

Then press Enter.

If any part of this fails, then navigate into the left-most pane with Ctrl-H and press R to retry.

Now type :wq to close Vim, then reopen by saying:

vi

You should no longer get a warning.

Prologue: Making your own changes

So you've installed this configuration onto your own machine. Now what? Now you get to customize it! For instance, maybe you want to customize how the prompt looks, or maybe you want to customize how tmux looks, or maybe you want to switch from zsh back to bash.

To do this, it's helpful to know where things are. Here are some key areas and what files control what things:

  • Shell configuration. Start in src/zshrc; this loads files in src/zsh/.
  • tmux configuration. This is located in src/tmux.conf.
  • Vim configuration. A lot of the Vim configuration is broken out into separate files within src/config/nvim/config. Here you can learn where the leader key is set to ,, why Ctrl-{H,J,K,L} lets you bounce between panes, how text width gets wrapped at 80 characters except in git commit message windows, and much more. Feel free to modify these files as you see fit. (You can learn more about a particular setting through :help. For instance, try :help textwidth or :help colorcolumn.) You can add any files you want to this folder, as long as you load them in src/config/nvim/init.vim.
  • Vim plugins. The list is kept in src/config/nvim/plugins.vim, and settings for these plugins are located at src/config/nvim/config/plugins, which are loaded in src/config/nvim/config/plugin-config.vim. There is a lot here, but don't panic! First, it's probably a good idea to read up on the most frequently used plugins mentioned at the beginning of this README. Learn what they do and how you can make use of them. If you don't feel like you need a plugin, feel free to disable it! You can do this by commenting it out in plugins.vim, and if it has a corresponding loader line in plugin-config.vim, comment that out, too. Then exit Vim, run :PlugClean, and reload Vim again.

If you end up adding a new file to src/, make sure to run bin/manage install again so that a symlink gets put in the right place.

Everything should serve a purpose. If you don't need it, don't be afraid to toss it out!

Finally, update this README to match any changes you end up making. Who knows — you might inspire someone else to create their own dotfiles repo!

Uninstalling everything

Given these dotfiles a try and decided they're not for you? No worries! Simply run the following to remove all of the symlinks:

script/manage uninstall --dry-run

As with the installation step, this will merely tell you what uninstallation would have done, but not do anything just yet. Review the output, and if everything looks good here, then run:

script/manage uninstall

If you backed up your previous dotfiles, you are now free to move them back.