generate CERT for SSTP:
openssl req -nodes -new -x509 -keyout /tmp/key.pem -out /tmp/cert.pem
https://www.the-digital-life.com/wireguard-docker/
WireGuard:
docker exec -it wireguard wg docker exec -it wireguard /app/show-peer 1 nano /opt/wireguard-server/config/wg0.conf
Guide: How to Set Up and Use IKEv2 VPN:
https://github.com/hwdsl2/setup-ipsec-vpn/blob/master/docs/ikev2-howto.md
remove env.sample to .env after upload to server
CONFIG SSTP:
docker exec -it sstp
./vpnserver start
You will get the following output: The SoftEther VPN Server service has been started. Let's get started by accessing to the following URL from your PC: https://69.28.88.203:5555/ or https://69.28.88.203/ Note: IP address may vary. Specify your server's IP address.
./vpncmd
By using vpncmd program, the following can be achieved.
- Management of VPN Server or VPN Bridge
- Management of VPN Client
- Use of VPN Tools (certificate creation and Network Traffic Speed Test Tool)
Select 1, 2 or 3: 1
Specify the host name or IP address of the computer that the destination VPN Server or VPN Bridge is operating on. By specifying according to the format 'host name:port number', you can also specify the port number. (When the port number is unspecified, 443 is used.) If nothing is input and the Enter key is pressed, the connection will be made to the port number 8888 of localhost (this computer). Hostname of IP Address of Destination:
If connecting to the server by Virtual Hub Admin Mode, please input the Virtual Hub name. If connecting by server admin mode, please press Enter without inputting anything. Specify Virtual Hub Name: Connection has been established with VPN Server "localhost" (port 443).
You have administrator privileges for the entire VPN Server.
ServerPasswordSet
ServerPasswordSet command - Set VPN Server Administrator Password Please enter the password. To cancel press the Ctrl+D key.
Password: ********** Confirm input: **********
The command completed successfully.
HubCreate myhub
HubCreate command - Create New Virtual Hub Please enter the password. To cancel press the Ctrl+D key.
Password: ********** Confirm input: **********
The command completed successfully.
Hub myhub
Hub command - Select Virtual Hub to Manage The Virtual Hub "myhub" has been selected. The command completed successfully.
VPN Server/myhub>
SecureNatEnable
SecureNatEnable command - Enable the Virtual NAT and DHCP Server Function (SecureNat Function) The command completed successfully.
UserCreate vpnuser
UserCreate command - Create User Assigned Group Name:
User Full Name: VPN User
User Description: IT
The command completed successfully.
UserPasswordSet vpnuser
UserPasswordSet command - Set Password Authentication for User Auth Type and Set Password Please enter the password. To cancel press the Ctrl+D key.
Password: ********** Confirm input: **********
The command completed successfully.
IPsecEnable
IPsecEnable command - Enable or Disable IPsec VPN Server Function Enable L2TP over IPsec Server Function (yes / no): yes
Enable Raw L2TP Server Function (yes / no): yes
Enable EtherIP / L2TPv3 over IPsec Server Function (yes / no): yes
Pre Shared Key for IPsec (Recommended: 9 letters at maximum): vpnserver
Default Virtual HUB in a case of omitting the HUB on the Username: myhub
The command completed successfully.
exit
https://cloudinfrastructureservices.co.uk/how-to-install-softether-vpn-server-on-ubuntu-20-04/
dns server
Changing the main DNS configuration file and add the public IP address of the container to the resolve.conf file.
echo "" > /etc/resolv.conf && echo "nameserver Public_IP_Of_Container" >> /etc/resolv.conf
#for prevent access from out of location iran ./iraccess.sh
//https://github.com/maj0rmil4d/maj0rdns/blob/main/README.md