Add missing OpenDrain[IO] tests

nrf52840-hal-tests/Cargo.toml

@@ -20,6 +20,10 @@ harness = false
 name = "gpio-output-open-drain"
 harness = false
 
+[[test]]
+name = "gpio-output-open-drain-io"
+harness = false
+
 [[test]]
 name = "nvmc"
 harness = false

nrf52840-hal-tests/tests/gpio-output-open-drain-io.rs

@@ -0,0 +1,93 @@
+// Required connections:
+//
+// - P0.28 <-> P0.29
+
+#![deny(warnings)]
+#![no_std]
+#![no_main]
+
+use defmt_rtt as _;
+use nrf52840_hal as _;
+use panic_probe as _;
+
+use nrf52840_hal::gpio::{Input, OpenDrainIO, Output, Pin, PullUp};
+
+struct State {
+    input_pin: Option<Pin<Input<PullUp>>>,
+    output_pin: Pin<Output<OpenDrainIO>>,
+}
+
+#[defmt_test::tests]
+mod tests {
+    use cortex_m::asm;
+    use defmt::{assert, unwrap};
+    use nrf52840_hal::{
+        gpio::{p0, Level, OpenDrainConfig},
+        pac,
+        prelude::*,
+    };
+
+    use super::State;
+
+    #[init]
+    fn init() -> State {
+        let p = unwrap!(pac::Peripherals::take());
+        let port0 = p0::Parts::new(p.P0);
+
+        let input_pin = Some(port0.p0_28.into_pullup_input().degrade());
+        let output_pin = port0
+            .p0_29
+            .into_open_drain_input_output(OpenDrainConfig::Standard0Disconnect1, Level::High)
+            .degrade();
+
+        State {
+            input_pin,
+            output_pin,
+        }
+    }
+
+    #[test]
+    fn set_low_is_low(state: &mut State) {
+        state.output_pin.set_low().unwrap();
+        // GPIO operations are not instantaneous so a delay is needed
+        asm::delay(100);
+        assert!(state.input_pin.as_ref().unwrap().is_low().unwrap());
+    }
+
+    #[test]
+    fn set_high_is_open(state: &mut State) {
+        state.output_pin.set_high().unwrap();
+        // GPIO operations are not instantaneous so a delay is needed
+        asm::delay(100);
+        assert!(state.input_pin.as_ref().unwrap().is_high().unwrap());
+
+        let pulled_down_input_pin = state.input_pin.take().unwrap().into_pulldown_input();
+        // GPIO operations are not instantaneous so a delay is needed
+        asm::delay(100);
+        assert!(pulled_down_input_pin.is_low().unwrap());
+
+        // Restore original input pin state
+        state.input_pin = Some(pulled_down_input_pin.into_pullup_input());
+    }
+
+    #[test]
+    fn open_pullup_reads_high(state: &mut State) {
+        state.output_pin.set_high().unwrap();
+        // GPIO operations are not instantaneous so a delay is needed
+        asm::delay(100);
+        assert!(state.output_pin.is_high().unwrap());
+    }
+
+    #[test]
+    fn open_pulldown_reads_low(state: &mut State) {
+        state.output_pin.set_high().unwrap();
+
+        let pulled_down_input_pin = state.input_pin.take().unwrap().into_pulldown_input();
+        // GPIO operations are not instantaneous so a delay is needed
+        asm::delay(100);
+        assert!(pulled_down_input_pin.is_low().unwrap());
+
+        // Restore original input pin state
+        state.input_pin = Some(pulled_down_input_pin.into_pullup_input());
+    }
+}

nrf52840-hal-tests/tests/gpio-output-open-drain.rs

@@ -10,15 +10,16 @@ use defmt_rtt as _;
 use nrf52840_hal as _;
 use panic_probe as _;
 
-use nrf52840_hal::gpio::{Floating, Input, OpenDrain, Output, Pin};
+use nrf52840_hal::gpio::{Input, OpenDrain, Output, Pin, PullUp};
 
 struct State {
-    input_pin: Pin<Input<Floating>>,
+    input_pin: Option<Pin<Input<PullUp>>>,
     output_pin: Pin<Output<OpenDrain>>,
 }
 
 #[defmt_test::tests]
 mod tests {
+    use cortex_m::asm;
     use defmt::{assert, unwrap};
     use nrf52840_hal::{
         gpio::{p0, Level, OpenDrainConfig},
@@ -33,7 +34,7 @@ mod tests {
         let p = unwrap!(pac::Peripherals::take());
         let port0 = p0::Parts::new(p.P0);
 
-        let input_pin = port0.p0_28.into_floating_input().degrade();
+        let input_pin = Some(port0.p0_28.into_pullup_input().degrade());
         let output_pin = port0
             .p0_29
             .into_open_drain_output(OpenDrainConfig::Standard0Disconnect1, Level::High)
@@ -48,15 +49,24 @@ mod tests {
     #[test]
     fn set_low_is_low(state: &mut State) {
         state.output_pin.set_low().unwrap();
-        assert!(state.input_pin.is_low().unwrap());
+        // GPIO operations are not instantaneous so a delay is needed
+        asm::delay(100);
+        assert!(state.input_pin.as_ref().unwrap().is_low().unwrap());
     }
 
-    // with the current API we cannot test this w/o an _external_ pull-up
-    /*
     #[test]
-    fn set_high_is_high(state: &mut State) {
+    fn set_high_is_open(state: &mut State) {
         state.output_pin.set_high().unwrap();
-        assert!(state.input_pin.is_high().unwrap());
+        // GPIO operations are not instantaneous so a delay is needed
+        asm::delay(100);
+        assert!(state.input_pin.as_ref().unwrap().is_high().unwrap());
+
+        let pulled_down_input_pin = state.input_pin.take().unwrap().into_pulldown_input();
+        // GPIO operations are not instantaneous so a delay is needed
+        asm::delay(100);
+        assert!(pulled_down_input_pin.is_low().unwrap());
+
+        // Restore original input pin state
+        state.input_pin = Some(pulled_down_input_pin.into_pullup_input());
     }
-    */
 }