zephyrproject-rtos · kartben · Oct 9, 2025 · Oct 9, 2025 · Oct 9, 2025
diff --git a/boards/nxp/common/board-footer.rst → boards/nxp/common/board-footer.rst.inc b/boards/nxp/common/board-footer.rst → boards/nxp/common/board-footer.rst.inc
@@ -1,8 +1,4 @@
-:orphan:
-
-.. nxp-board-footer
-
 Support Resources for Zephyr
 ============================
 - `NXP Zephyr Downstream Software Development Kit`_
 - `MCUXpresso for VS Code`_, `wiki`_ documentation and `Zephyr lab guides`_

diff --git a/boards/nxp/common/opensda-debug.rst → boards/nxp/common/opensda-debug.rst.inc b/boards/nxp/common/opensda-debug.rst → boards/nxp/common/opensda-debug.rst.inc
@@ -1,8 +1,4 @@
-:orphan:
-
-.. nxp-opensda-probes
-
 A debug probe is used for both flashing and debugging the board. This board has
 an :ref:`opensda-onboard-debug-probe`. The default firmware present on this
 probe is the :ref:`opensda-daplink-onboard-debug-probe`.


diff --git a/boards/nxp/common/rt1xxx-lpclink2-debug.rst → .../nxp/common/rt1xxx-lpclink2-debug.rst.inc b/boards/nxp/common/rt1xxx-lpclink2-debug.rst → .../nxp/common/rt1xxx-lpclink2-debug.rst.inc
@@ -1,8 +1,4 @@
-:orphan:
-
-.. rt1xxx-lpclink2-probes
-
 A debug probe is used for both flashing and debugging the board. This board has
 an :ref:`lpc-link2-onboard-debug-probe`. The default firmware present on this
 probe is the :ref:`lpclink2-daplink-onboard-debug-probe`.


diff --git a/boards/nxp/common/segger-ecc-systemview.rst → .../nxp/common/segger-ecc-systemview.rst.inc b/boards/nxp/common/segger-ecc-systemview.rst → .../nxp/common/segger-ecc-systemview.rst.inc
@@ -1,8 +1,4 @@
-:orphan:
-
-.. segger-ecc-systemview
-
 Using Segger SystemView and RTT
 -------------------------------
 
 Note that when using SEGGER SystemView or RTT with this SOC, the RTT control

diff --git a/boards/nxp/frdm_imx91/doc/index.rst b/boards/nxp/frdm_imx91/doc/index.rst
@@ -118,5 +118,4 @@ display the following console output:
     thread_a: Hello World from cpu 0 on frdm_imx91!
     thread_b: Hello World from cpu 0 on frdm_imx91!
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
diff --git a/boards/nxp/frdm_imx93/doc/index.rst b/boards/nxp/frdm_imx93/doc/index.rst
@@ -160,5 +160,4 @@ kernel reboot command in shell command line:
 
     uart:~$ kernel reboot cold
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
diff --git a/boards/nxp/frdm_k22f/doc/index.rst b/boards/nxp/frdm_k22f/doc/index.rst
@@ -239,8 +239,7 @@ should see the following message in the terminal:
    ***** Booting Zephyr OS v2.0.0 *****
    Hello World! frdm_k22f
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _FRDM-K22F Website:
    https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/freedom-development-boards/mcu-boards/nxp-freedom-development-platform-for-kinetis-k22-mcus:FRDM-K22F

diff --git a/boards/nxp/frdm_k32l2b3/doc/index.rst b/boards/nxp/frdm_k32l2b3/doc/index.rst
@@ -165,8 +165,7 @@ should see the following message in the terminal:
    *** Booting Zephyr OS build v4.1.0-7032-g3198db1b1229 ***
    Hello World! frdm_k32l2b3/k32l2b31a
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _KL32-L2 Website:
    https://www.nxp.com/products/K32-L2

diff --git a/boards/nxp/frdm_k64f/doc/index.rst b/boards/nxp/frdm_k64f/doc/index.rst
@@ -307,8 +307,7 @@ of pyocd commands:
    Resetting target
    >>> quit
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _FRDM-K64F Website:
    https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/freedom-development-boards/mcu-boards/freedom-development-platform-for-kinetis-k64-k63-and-k24-mcus:FRDM-K64F

diff --git a/boards/nxp/frdm_k82f/doc/index.rst b/boards/nxp/frdm_k82f/doc/index.rst
@@ -178,8 +178,7 @@ should see the following message in the terminal:
    ***** Booting Zephyr OS v1.14.0-xxx-gxxxxxxxxxxxx *****
    Hello World! frdm_k82f
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _FRDM-K82F Website:
    https://www.nxp.com/design/development-boards/freedom-development-boards/mcu-boards/freedom-development-platform-for-kinetis-k82-k81-and-k80-mcus:FRDM-K82F

diff --git a/boards/nxp/frdm_ke15z/doc/index.rst b/boards/nxp/frdm_ke15z/doc/index.rst
@@ -138,8 +138,7 @@ should see the following message in the terminal:
    ***** Booting Zephyr OS v3.6.0-xxx-gxxxxxxxxxxxx *****
    Hello World! frdm_ke15z
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _KE1XZ SoC Website:
    https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/ke-series-arm-cortex-m4-m0-plus/ke1xz-arm-cortex-m0-plus-5v-main-stream-mcu-with-nxp-touch-and-can-control:KE1xZ

diff --git a/boards/nxp/frdm_ke17z/doc/index.rst b/boards/nxp/frdm_ke17z/doc/index.rst
@@ -146,8 +146,7 @@ should see the following message in the terminal:
    *** Booting Zephyr OS build xxxxxxxxxxxx ***
    Hello World! frdm_ke17z/mke17z7
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _FRDM-KE17Z Website:
    https://www.nxp.com/design/design-center/development-boards-and-designs/general-purpose-mcus/freedom-development-platform-for-72mhz-ke17z-ke13z-ke12z-mcus:FRDM-KE17Z

diff --git a/boards/nxp/frdm_ke17z512/doc/index.rst b/boards/nxp/frdm_ke17z512/doc/index.rst
@@ -141,8 +141,7 @@ should see the following message in the terminal:
    *** Booting Zephyr OS build v3.6.0-xxxx-gxxxxxxxxxxxx ***
    Hello World! frdm_ke17z512/mke17z9
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _FRDM-KE17Z512 Website:
    https://www.nxp.com/design/design-center/development-boards-and-designs/general-purpose-mcus/frdm-development-board-for-96-mhz-ke17z-ke13z-ke12z-with-512-kb-flash-mcus:FRDM-KE17Z512

diff --git a/boards/nxp/frdm_kl25z/doc/index.rst b/boards/nxp/frdm_kl25z/doc/index.rst
@@ -188,8 +188,7 @@ should see the following message in the terminal:
    ***** Booting Zephyr OS v1.14.0-rc1 *****
    Hello World! frdm_kl25z
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _FRDM-KL25Z Website:
    https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/kinetis-cortex-m-mcus/l-seriesultra-low-powerm0-plus/freedom-development-platform-for-kinetis-kl14-kl15-kl24-kl25-mcus:FRDM-KL25Z

diff --git a/boards/nxp/frdm_kw41z/doc/index.rst b/boards/nxp/frdm_kw41z/doc/index.rst
@@ -190,8 +190,7 @@ should see the following message in the terminal:
    ***** Booting Zephyr OS v1.14.0-rc1 *****
    Hello World! frdm_kw41z
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _FRDM-KW41Z Website:
    https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/kinetis-cortex-m-mcus/w-serieswireless-conn.m0-plus-m4/freedom-development-kit-for-kinetis-kw41z-31z-21z-mcus:FRDM-KW41Z

diff --git a/boards/nxp/frdm_mcxa153/doc/index.rst b/boards/nxp/frdm_mcxa153/doc/index.rst
@@ -154,11 +154,9 @@ should see the following message in the terminal:
 Troubleshooting
 ===============
 
-.. include:: ../../common/segger-ecc-systemview.rst
-   :start-after: segger-ecc-systemview
+.. include:: ../../common/segger-ecc-systemview.rst.inc
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _MCX-A153 SoC Website:
    https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/mcx-arm-cortex-m/mcx-a-series-microcontrollers/mcx-a13x-14x-15x-mcus-with-arm-cortex-m33-scalable-device-options-low-power-and-intelligent-peripherals:MCX-A13X-A14X-A15X

diff --git a/boards/nxp/frdm_mcxa156/doc/index.rst b/boards/nxp/frdm_mcxa156/doc/index.rst
@@ -154,11 +154,9 @@ should see the following message in the terminal:
 Troubleshooting
 ===============
 
-.. include:: ../../common/segger-ecc-systemview.rst
-   :start-after: segger-ecc-systemview
+.. include:: ../../common/segger-ecc-systemview.rst.inc
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _MCX-A156 SoC Website:
    https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/mcx-arm-cortex-m/mcx-a-series-microcontrollers/mcx-a13x-14x-15x-mcus-with-arm-cortex-m33-scalable-device-options-low-power-and-intelligent-peripherals:MCX-A13X-A14X-A15X

diff --git a/boards/nxp/frdm_mcxaxx6/doc/frdm_mcxa266.rst b/boards/nxp/frdm_mcxaxx6/doc/frdm_mcxa266.rst
@@ -153,11 +153,9 @@ should see the following message in the terminal:
 Troubleshooting
 ===============
 
-.. include:: ../../common/segger-ecc-systemview.rst
-   :start-after: segger-ecc-systemview
+.. include:: ../../common/segger-ecc-systemview.rst.inc
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _MCX-A266 SoC Website:
    https://www.nxp.com/products/MCX-A345-A346

diff --git a/boards/nxp/frdm_mcxaxx6/doc/frdm_mcxa346.rst b/boards/nxp/frdm_mcxaxx6/doc/frdm_mcxa346.rst
@@ -153,11 +153,9 @@ should see the following message in the terminal:
 Troubleshooting
 ===============
 
-.. include:: ../../common/segger-ecc-systemview.rst
-   :start-after: segger-ecc-systemview
+.. include:: ../../common/segger-ecc-systemview.rst.inc
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _MCX-A346 SoC Website:
    https://www.nxp.com/products/MCX-A345-A346

diff --git a/boards/nxp/frdm_mcxaxx6/doc/frdm_mcxa366.rst b/boards/nxp/frdm_mcxaxx6/doc/frdm_mcxa366.rst
@@ -153,11 +153,9 @@ should see the following message in the terminal:
 Troubleshooting
 ===============
 
-.. include:: ../../common/segger-ecc-systemview.rst
-   :start-after: segger-ecc-systemview
+.. include:: ../../common/segger-ecc-systemview.rst.inc
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _MCX-A366 SoC Website:
    https://www.nxp.com/products/MCX-A345-A346

diff --git a/boards/nxp/frdm_mcxaxx6/doc/index.rst b/boards/nxp/frdm_mcxaxx6/doc/index.rst
diff --git a/boards/nxp/frdm_mcxc242/doc/index.rst b/boards/nxp/frdm_mcxc242/doc/index.rst
@@ -174,8 +174,7 @@ should see the following message in the terminal:
    *** Booting Zephyr OS build v3.6.0-4475-gfa5bd8bb098e ***
    Hello World! frdm_mcxc242/mcxc242
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _MCX C14x/24x/44x Website:
    https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/mcx-arm-cortex-m/mcx-c-series-microcontrollers/mcx-c14x-24x-44x-mcus-with-arm-cortex-m0-plus-entry-level-mcus-with-usb-segment-lcd-and-classical-peripherals:MCX-C14x-24x-44x

diff --git a/boards/nxp/frdm_mcxc444/doc/index.rst b/boards/nxp/frdm_mcxc444/doc/index.rst
@@ -169,8 +169,7 @@ should see the following message in the terminal:
    *** Booting Zephyr OS build v3.6.0-4475-gfa5bd8bb098e ***
    Hello World! frdm_mcxc444/mcxc444
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _MCX C14x/24x/44x Website:
    https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/mcx-arm-cortex-m/mcx-c-series-microcontrollers/mcx-c14x-24x-44x-mcus-with-arm-cortex-m0-plus-entry-level-mcus-with-usb-segment-lcd-and-classical-peripherals:MCX-C14x-24x-44x

diff --git a/boards/nxp/frdm_mcxn236/doc/index.rst b/boards/nxp/frdm_mcxn236/doc/index.rst
@@ -154,11 +154,9 @@ should see the following message in the terminal:
 Troubleshooting
 ===============
 
-.. include:: ../../common/segger-ecc-systemview.rst
-   :start-after: segger-ecc-systemview
+.. include:: ../../common/segger-ecc-systemview.rst.inc
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _MCX-N236 SoC Website:
    https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/mcx-arm-cortex-m/mcx-n-series-microcontrollers/mcx-n23x-highly-integrated-mcus-with-on-chip-accelerators-intelligent-peripherals-and-advanced-security:MCX-N23X

diff --git a/boards/nxp/frdm_mcxn947/doc/index.rst b/boards/nxp/frdm_mcxn947/doc/index.rst
@@ -351,11 +351,9 @@ will print:
 Troubleshooting
 ===============
 
-.. include:: ../../common/segger-ecc-systemview.rst
-   :start-after: segger-ecc-systemview
+.. include:: ../../common/segger-ecc-systemview.rst.inc
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _MCX-N947 SoC Website:
    https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/mcx-arm-cortex-m/mcx-n-series-microcontrollers/mcx-n94x-54x-highly-integrated-multicore-mcus-with-on-chip-accelerators-intelligent-peripherals-and-advanced-security:MCX-N94X-N54X

diff --git a/boards/nxp/frdm_mcxw23/doc/index.rst b/boards/nxp/frdm_mcxw23/doc/index.rst
@@ -198,8 +198,7 @@ should see the following message in the terminal:
    *** Booting Zephyr OS build v4.2.0-2105-g48f2ffda26de ***
    Hello World! frdm_mcxw23/mcxw236
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _MCXW23 SoC Website:
    https://www.nxp.com/products/MCX-W23

diff --git a/boards/nxp/frdm_mcxw71/doc/index.rst b/boards/nxp/frdm_mcxw71/doc/index.rst
@@ -214,11 +214,9 @@ For more details:
 Troubleshooting
 ===============
 
-.. include:: ../../common/segger-ecc-systemview.rst
-   :start-after: segger-ecc-systemview
+.. include:: ../../common/segger-ecc-systemview.rst.inc
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 References
 **********

diff --git a/boards/nxp/frdm_mcxw72/doc/index.rst b/boards/nxp/frdm_mcxw72/doc/index.rst
@@ -191,11 +191,9 @@ The NBU files can be found in : ``<zephyr workspace>/modules/hal/nxp/zephyr/blob
 Troubleshooting
 ===============
 
-.. include:: ../../common/segger-ecc-systemview.rst
-   :start-after: segger-ecc-systemview
+.. include:: ../../common/segger-ecc-systemview.rst.inc
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 References
 **********

diff --git a/boards/nxp/frdm_rw612/doc/index.rst b/boards/nxp/frdm_rw612/doc/index.rst
@@ -151,8 +151,7 @@ following modifications to the board hardware:
 
 After this change, the ENET will stop functioning on the board.
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 Resources
 *********

diff --git a/boards/nxp/hexiwear/doc/index.rst b/boards/nxp/hexiwear/doc/index.rst
@@ -501,8 +501,7 @@ you should see the following message in the terminal:
    ***** Booting Zephyr OS v1.14.0-rc1 *****
    Hello World! hexiwear
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _KW40Z Website:
    https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/kinetis-cortex-m-mcus/w-serieswireless-conn.m0-plus-m4/kinetis-kw40z-2.4-ghz-dual-mode-ble-and-802.15.4-wireless-radio-microcontroller-mcu-based-on-arm-cortex-m0-plus-core:KW40Z

diff --git a/boards/nxp/imx8mm_evk/doc/index.rst b/boards/nxp/imx8mm_evk/doc/index.rst
@@ -260,8 +260,7 @@ should see the following message in the terminal:
    ***** Booting Zephyr OS build zephyr-v2.0.0-1859-g292afe8533c0 *****
    Hello World! imx8mm_evk
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _NXP website:
    https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/evaluation-kit-for-thebr-i.mx-8m-mini-applications-processor:8MMINILPD4-EVK

diff --git a/boards/nxp/imx8mn_evk/doc/index.rst b/boards/nxp/imx8mn_evk/doc/index.rst
@@ -166,8 +166,7 @@ display the following ram console output:
     thread_b: Hello World from cpu 0 on mimx8mn_evk!
     thread_a: Hello World from cpu 0 on mimx8mn_evk!
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _NXP website:
    https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/evaluation-kit-for-the-i-mx-8m-nano-applications-processor:8MNANOD4-EVK

diff --git a/boards/nxp/imx8mp_evk/doc/index.rst b/boards/nxp/imx8mp_evk/doc/index.rst
@@ -362,8 +362,7 @@ should see the following message in the terminal:
    *** Booting Zephyr OS build v2.7.99-1310-g2801bf644a91  ***
    Hello World! imx8mp_evk
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _NXP website:
    https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/evaluation-kit-for-the-i-mx-8m-plus-applications-processor:8MPLUSLPD4-EVK

diff --git a/boards/nxp/imx8mq_evk/doc/index.rst b/boards/nxp/imx8mq_evk/doc/index.rst
@@ -179,8 +179,7 @@ should see the following message in the terminal:
    ***** Booting Zephyr OS build zephyr-v2.6.99-30942-g6ee70bd22058 *****
    Hello World! imx8mq_evk
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 .. _NXP website:
    https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/evaluation-kit-for-the-i-mx-8m-applications-processor:MCIMX8M-EVK

diff --git a/boards/nxp/imx91_evk/doc/index.rst b/boards/nxp/imx91_evk/doc/index.rst
@@ -151,5 +151,4 @@ display the following console output:
     thread_a: Hello World from cpu 0 on imx91_evk!
     thread_b: Hello World from cpu 0 on imx91_evk!
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
diff --git a/boards/nxp/imx91_qsb/doc/index.rst b/boards/nxp/imx91_qsb/doc/index.rst
@@ -117,5 +117,4 @@ display the following console output:
     thread_a: Hello World from cpu 0 on imx91_qsb!
     thread_b: Hello World from cpu 0 on imx91_qsb!
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
diff --git a/boards/nxp/imx93_evk/doc/index.rst b/boards/nxp/imx93_evk/doc/index.rst
@@ -462,5 +462,4 @@ This board has been designed for SOF so it's only intended to be used with SOF.
 TODO: document the SOF build process for this board. For now, the support for
 i.MX93 is still in review and has yet to merged on SOF side.
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
diff --git a/boards/nxp/imx943_evk/doc/index.rst b/boards/nxp/imx943_evk/doc/index.rst
@@ -201,8 +201,7 @@ Then the following log could be found on UART1 console:
     *** Booting Zephyr OS build v4.1.0-3650-gdb71736adb68 ***
     Hello World! imx943_evk/mimx94398/a55
 
-.. include:: ../../common/board-footer.rst
-   :start-after: nxp-board-footer
+.. include:: ../../common/board-footer.rst.inc
 
 Programming and Debugging (M33 in NETC MIX, M7_0 in M7MIX0, M7_1 in M7MIX1)
 ***************************************************************************